• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1537-1540
• /
• 2003

MEMS technology with micro scale is complete system utilized as the sensor. micro electro device. The metallization of MEMS is very important to transfer the power operating the sensor and signal induced from sensor part. But in the MEMS structures local stress concentration and deformation is often happened by geometrical shape and different constraint on the metallization. Therefore. this paper studies the effect of supporting type and thickness ratio about thin film thickness of the substrate thickness for the residual stress variation caused by thermal load in the multi-layer thin film. Specimens were made from materials such as Al, Au and Cu and uniform thermal load was applied, repeatedly. The residual stress was measured by FEA and nano-indentation using AFM. Generally, the specimen made of Al induced the large residual stress and the 1st layer made of Al reduced the residual stress about half percent than 2nd layer. Specimen made of Cu and Au being the lower thermal expansion coefficient induce the minimum residual stress. Similarly the lowest indentation length was measured in the Au_Cu specimen by nano-indentation.

• Journal of Welding and Joining
• /
• 제19권1호
• /
• pp.49-57
• /
• 2001

In this study, the residual stress fields of multi-pass welded were analyzed by FEA under various geometrical conditions. In order to estimate the effects of pipe geometries on residual stress distribution, welding processes of each model were performed under the same heat cycles. And then, the influence of cutting off the weld bead on the residual stress redistribution was also estimated. From the results, in the range of t/D=0.05, axial residual stresses on the outer surface of the welded pipe were linearly decreased with pipe diameter increase. On the other hand, hoop residual stresses were not influenced by them. And both axial and hoop residual stresses on the outer surface of the welded pipe were increased with pipe diameter increase. But, when t/D was smaller than 0.05, they were converged in the nearly same value. The maximum residual stresses were generated at around HAZ. It in therefore necessary to consider them in welding design, strength evaluation, and analysis of fracture characteristics.

• 한국초지조사료학회지
• /
• 제43권1호
• /
• pp.42-49
• /
• 2023

The plant-specific NAC transcription factors control various biological processes, including plant development and stress responses. We have isolated an ANAC032 gene, one of the NAC transcription factor family, which was highly activated by multi-abiotic stresses, including high salt and drought in Arabidopsis. Here, we generated transgenic plants constitutively expressing ANAC032 and its knockout to identify the functional roles of ANAC032 in Arabidopsis under abiotic stress responses. The ANAC032-overexpressing plants showed enhanced tolerance to salinity and drought stresses. The anac032 knockout mutants were observed no significant changes under the high salt and drought conditions. We also monitored the expression of high salt and drought stress-responsive genes in the ANAC032 transgenic plants and anac032 mutant. The ANAC032 overexpression upregulated the expression of stress-responsive genes, RD29A and ERD10, under the stresses. Thus, our data identify that transcription factor ANAC032 plays as an enhancer for salinity and drought tolerance through the upregulation of stress-responsive genes and provides useful genetic traits for generating multi-abiotic stress-tolerant forage crops.

• 가정과삶의질연구
• /
• 제27권2호
• /
• pp.255-268
• /
• 2009

The purpose of this study was to deepen our understanding about mothers' parenting stress in multi-cultural families. The study was conducted through in-depth interviews of 6 mothers from Mongolia, Philippines, and Japan who were living in Seoul. The findings of this study were as follows. First, mothers of multi-cultural families had difficulties of giving birth and child rearing, especially in the earliest years of their children. They were not fully adapted to the ways of living in Korea with little social support from family members and neighbors. Second, they were worried about their children's development, particularly language development due to their lack of understanding and fluency in Korean. Third, they were concerned about the cultural and racial discrimination against their children. They expected their children to be treated and respected equally like ordinary Korean children. Fourth, they were anxious about the fact that their children might not acquire the basic academic skills before they enter the elementary schools. Furthermore, they were worried that their children might not get as much educational support as they want. Fifth, despite the burden of mother's role in Korea, they wished to get a job to support their children for better education. In conclusion, the marriage immigrant mothers experienced the stress due to the lack of social support, the discrimination against immigrants, the possibilities of their children's delays in development, the disparity in the level of support for educating their children and the high expectations about their children's education in Korean society. Therefore it is necessary for the policy makers to consider more practical support system for the multi-cultural families in order for the marriage immigrant mothers to build up self-confidence in child rearing and educating their children.

• 한국항공우주학회지
• /
• 제49권8호
• /
• pp.617-626
• /
• 2021

비행체의 초음속 비행 중 고온 환경에서의 열 거동은 비행체의 열 구조 설계에 중요하다. 본 연구에서는 전역-국부 다중 디지털 이미지 상관기법을 사용하여 노치 구조물의 전 영역의 열변형 및 응력집중 현상에 대해 관찰/분석하였다. 다중 DIC 시스템은 2D DIC 시스템과 3D DIC 시스템으로 구성되었다. 가열 챔버를 이용하여 노치 시편을 가열하였으며 여러 온도에서 다중 DIC 시스템을 사용하여 구조물의 변형 이미지를 촬영하고 분석하였다. 다중 DIC 기법을 사용하여 노치 시편의 전 영역 변형률과 노치 부위의 응력집중 현상을 계측/분석하였으며 ABAQUS^TM 프로그램을 이용하여 노치 시편에 대해 유한요소해석을 진행하고 실험결과와 비교 분석하였다. 본 연구를 통해 다중 DIC 시스템의 열변형 계측과 응력 집중 현상의 연구 분석에서의 활용 가능성을 보여주었다.

• 한국지반공학회지:지반
• /
• 제11권1호
• /
• pp.23-40
• /
• 1995

다주기 Ko-재하/제하 시에 수평응력의 변화특성을 관찰하기 위하여 7종류의 시험모형을 선 정하였고, Ko조건을 크게 만족할 수 있도록 특별히 고안한압밀링 형태의 Ko-시험기를 제작하여 실내 건조된 모래에 대하여 실험을 수행하였다. 시험모형은 동일한 재하/제하 응력의 반복, 최대선행응력을 초과하는 반복 재하/제하, 그리고 최대선행 연직응력 내의 반복 재하/제하 Ko시험으로 구분된다. 실험결과에서 다주기 이력모형도 역시 기존의 단주기 이력모형을 확대하여 사용할 수 있음을 보였다. 여기서, 제하시의 지수 (a 및 a*)와 재재하 시의 계수(mr 및 mr*)는 응력이력의 형태, 반복회수 및 상대밀도에 따라 주로 지배되었다.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.4769-4775
• /
• 2014

본 논문은 다관절 붐의 선단이 구조물과 충돌할 때 발생하는 각 붐의 동응력에 대해서 논하고자 한다. CATIA를 이용하여 3D 모델을 작성하고, ADAMS와 ANSYS를 이용하여 메쉬작업을 수행 후 응력데이터를 포함한 다관절 붐의 MNF를 만든다. 이 두가지 모델을 가지고 ADAMS에서 FFT해석을 수행하여 각각 모델의 타당성을 알아본다. ADAMS에서 타당성이 검증된 모델을 이용하여 붐 선단의 충돌해석에 따른 동특성 해석을 수행한다. ADAMS Durability를 이용하여 다관절 붐과 구조물의 충돌시 각 붐에 응력이 크게 발생하는 지점을 알아보고자 한다.

• Geomechanics and Engineering
• /
• 제20권2호
• /
• pp.113-120
• /
• 2020

Rock damage is the main cause of accidents in underground engineering. It is difficult to predict rock damage accurately by using only one parameter. In this study, a rock failure prediction model was established by using stress, energy, and damage. The prediction level was divided into three levels according to the ratio of the damage threshold stress to the peak stress. A classification predicting model was established, including the stress, energy, damage and AE impact rate using Bayesian method. Results show that the model is good practicability and effectiveness in predicting the degree of rock failure. On the basis of this, a multi-parameter classification predicting deterioration model of rock failure was established. The results provide a new idea for classifying and predicting rockburst.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.469-472
• /
• 2004

There have been numerous accelerated aging laboratory tests for evaluating suitability of polymeric materials and devices. Aging test for materials and its full scale device has been conducted, but poor correlation of aging test such as service experience were observed. Service experience plays a key role in the utility section of composite insulators. A meaningful and reliable accelerated aging test is needed for evaluating composite insulator. During the service these insulators are subjected to aging stress such as humidity, pollution, and electrical field, and erosion and tracking of the weathershed occurs. This paper presents the criteria of reliability evaluation and evaluation facilities for 22.9 kV suspension composite insulator. We adopt the criteria of reliability evaluation consist of two test methods. One is CEA tracking wheel test for examining the tracking and erosion performance of composite insulator. The other is multi-stress aging test for examining effects of environmental factors such as UV, temperature, humidity, etc on composite insulator.

• 아동학회지
• /
• 제32권1호
• /
• pp.31-49
• /
• 2011

This study centred around the development of a parenting training program for improving parent-child relationships in multi-cultural families and to examine the effects of the program. The goal of this program was to improve parent-child relationships in multi-cultural families. The program consists of 8 sessions and each session employs a variety of activities and teaching methods to help multi-cultural mothers to become more involved in the a program. The participants were 12 mothers of multi-cultural backgrounds in Seoul and Asan city. There 12 mothers were assigned to the experimental group participated in this program for a total of 8 sessions. Data were analyzed according to frequencies, percentiles, means, standard deviations, and paired t-test. The results of this study indicated that this parenting training program for improving parent-child relationships was effective in improving multi-cultural mother's parenting efficacy and reducing their parenting stress.