• 제목/요약/키워드: Multi-start

검색결과 211건 처리시간 0.034초

노후 디젤차량으로부터 전소 천연가스자동차로의 개조 기술 개발 (Development of Conversion Technology of a Decrepit Diesel Vehicle to the Dedicated Natural Gas Vehicle)

  • 유경현;김봉규
    • 한국자동차공학회논문집
    • /
    • 제14권6호
    • /
    • pp.73-81
    • /
    • 2006
  • A commercial diesel engine was converted into a dedicated natural gas engine to reduce the exhaust emissions in a retrofit of a diesel-fueled vehicle. The cylinder head and piston were remodeled into engine parts suited for a spark ignition engine using natural gas. The remodeling of the combustion chamber changed the compression ratio from 21.5 to 10.5. A multi-point port injection(MPI) system for a dedicated natural gas engine was also adopted to increase the engine power and torque through improved volumetric efficiency, to allow a rapid engine response to changes in throttle position, and to control the precise equivalence ratio during cold-start and engine warm-up. The performance and exhaust emissions of the retrofitted natural gas engine after remodeling a diesel engine are investigated. The emissions of the retrofitted natural gas engine were low enough to satisfy the limits for a transitional low emission vehicle(TLEV) in Korea. We concluded that a diesel engine can be effectively converted into a dedicated natural gas engine without any deterioration in engine performance or exhaust emissions.

한국전탑(韓國塼塔)에 관한 비교론적(比較論的) 연구(硏究) (A Comparative Studies on the Korean Brick Pagoda)

  • 천득염;김은양
    • 건축역사연구
    • /
    • 제4권2호
    • /
    • pp.25-44
    • /
    • 1995
  • Bricks are the earliest man-made building materials. Small-size bar bricks were found in use in the Warring States Period(戰國時代) in China. During the Qin(秦) and the Han(漢) Dynasties, brick constructions were built on a larger scale, but most of them were tombs. In case of Korea, bricks were found in use in the Three Kingdoms Period, but also most of them were tombs. Starting from the Unified Silla Period(統一新羅時代), brick gradually became a universal practice to built Buddhist Pagodas with bar bricks. Brick pagodas emergence marked a stage where technological progress made it possible for man to built high-rise brick work, and their dvelopment further perfected masonry technique and enabled building technology to attain new heights. Though from the very start brick pagodas existed side by side with stone pagodas, at the enitial stage they were overshadowed by their wooden counterparts and stone counterparts, because masonry thechiques were then still rather primitive, while woodwork and stonework had already reached a fairly advaced stage. The pagodas in ancient Korea were closely related to the Chinese stupa, which consisted of three parts, namely, the base, the body and the spire. The fact was, soon after the stupas were introduced into Korea, the Korean stupas began to develop features of their own. Korean brick pagodas were made up of a single-storeyed square base, multi-storeyed square body with a small gate, and a steel post with several layers of lotus flower superimposed one on the other.

  • PDF

Subaru Strategy for 2020's

  • Arimoto, Nobuo
    • 천문학회보
    • /
    • 제40권2호
    • /
    • pp.27.2-27.2
    • /
    • 2015
  • Strategic plan of Subaru science and operation will be introduced. Currently, Subaru has wide variety of instruments, conducts only classical observations, with less than 5 nights allocation for each proposal. Near future, Subaru will emphasize on surveys, introduce queue mode observations, reduce the number of instruments, and concentrate on large size programs. Large surveys are called Subaru Strategic Programs (SSPs). HSC-SSP is on-going (300 nights for 5 years), PFS-SSP will start at around 2020 (360 nights for 5 years), and IRD-SSP from 2016 (TBD). HSC science includes 1) cosmology with gravitational lensing, 2) lensing studies of galaxies and clusters, 3) photometric redshifts, 4) the Solar system, 5) the Milky Way and the Local Group, 6) AGN/quasars, 7) transients, 8) galaxies at low/high redshifts, and 9) clusters of galaxies. PFS science includes 1) cosmology, 2) galaxy & AGN, and 3) galactic archaeology. Subaru is planning the third pillar instrument, so called ULTIMATE-Subaru, which is the GLAO optical-NIR wide field camera & multi-IFU spectrograph for finding galaxies at ultra high redshift (z>10). Finally the strategy from Subaru to TMT will be presented. Subaru will conduct four major SSPs (HSC, PFS, IRD, ULTIMATE-Subaru) in coming decade to provide targets to TMT. HSC performs wide field surveys to reveal the distribution of dark matter in the Universe. IRD surveys Earth-like young planets to discover ~20 Earth-like habitable planets. PFS studies the expanding Universe to provide a few million emission line galaxies to TMT.

  • PDF

Observational Studies with the Korean VLBI Network

  • Cho, Se-Hyung;KVN Groups
    • 천문학회보
    • /
    • 제38권2호
    • /
    • pp.32-32
    • /
    • 2013
  • The Korean VLBI Network (KVN) as a world-first multi-frequency VLBI system is operated at four bands of 22, 43, 86, and 129 GHz simultaneously. The performances of both single dish and VLBI network were already confirmed through single dish researches and VLBI evaluation test observations. The VLBI common use of the KVN at 22/43 GHz bands has been started from this autumn. The combined network of KVN and Japanese VERA (KaVA) will start the common use from the first half of next year. Here we present several observational results in the fields of star forming regions, late-type stars, and active galactic nuclei using the KVN and KaVA. The fringes of 44 GHz $CH_3OH$ (Class I) masers were detected from 26 sources for the first time using the KVN and imaging observations are under performing. Simultaneous observations of SiO and $H_2O$ masers toward about 1000 evolved stars showed the different maser properties between SiO and $H_2O$ masers according to the evolutionary stages of AGB and post-AGB stars. The catalog of correlated flux densities were established from a 43 GHz (Q-band) survey of 637 extragalactic sources. At 22 GHz (K-band), flux density measurement and fringe survey for new sources were performed toward a large number of sources. In addition, the large program of KVN and/or KaVA under planning is introduced.

  • PDF

Combined Time Synchronization And Channel Estimation For MB-OFDM UWB Systems

  • Kareem, Aymen M.;El-Saleh, Ayman A.;Othman, Masuri
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제6권7호
    • /
    • pp.1792-1801
    • /
    • 2012
  • Symbol timing error amounts to a major degradation in the system performance. Conventionally, timing error is estimated by predefined preamble on both transmitter and receiver. The maximum of the correlation result is considered the start of the OFDM symbol. Problem arises when the prime path is not the strongest one. In this paper, we propose a new combined time and channel estimation method for multi-band OFDM ultra wide-band (MB-OFDM UWB) systems. It is assumed that a coarse timing has been obtained at a stage before the proposed scheme. Based on the coarse timing, search interval is set (or time candidates). Exploiting channel statistics that are assumed to be known by the receiver, we derive a maximum a posteriori estimate (MAP) of the channel impulse response. Based on this estimate, we discern for the timing error. Timing estimation performance is compared with the least squares (LS) channel estimate in terms of mean squared error (MSE). It is shown that the proposed timing scheme is lower in MSE than the LS method.

로봇 경로 제어를 위한 속도기반 Dijkstra 알고리즘 (A Speed-Based Dijkstra Algorithm for the Line Tracer Control of a Robot)

  • 천성권;김근덕;김종근
    • 한국IT서비스학회지
    • /
    • 제10권4호
    • /
    • pp.259-268
    • /
    • 2011
  • A robot education system by emulation based on Web can be efficiently used for understanding concept of robot assembly practice and control mechanism of robot by control programming. It is important to predict the path of the line tracer robot which has to be decided by the robot. Shortest Path Algorithm is a well known algorithm which searches the most efficient path between the start node and the end node. There are two related typical algorithms. Dijkstra Algorithm searches the shortest path tree from a node to the rest of the other nodes. $A^*$ Algorithm searches the shortest paths among all nodes. The delay time caused by turning the direction of navigation for the line tracer robot at the crossroads can give big differences to the travel time of the robot. So we need an efficient path determine algorithm which can solve this problem. Thus, It is necessary to analyze the overhead of changing direction of robot at multi-linked node to determine the next direction for efficient routings. In this paper, we reflect the real delay time of directional changing from the real robot. A speed based Dijkstra algorithm is proposed and compared with the previous ones to analyze the performance.

무선 센서 네트워크 라우팅 보안 강화 기법의 설계 (A design of the wireless sensor network routing improved security method)

  • 김우진;길아라
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2010년도 한국컴퓨터종합학술대회논문집 Vol.37 No.2(A)
    • /
    • pp.101-106
    • /
    • 2010
  • 본 논문에서 제안하는 라우팅 기법은 분산된 센서 네트워크 상의 시작 노드에서 목적지 노드까지 데이터를 전송 할 때, 유효 데이터를 암호화 하고 그것을 분할하여 서로 다른 경로를 통해 전송함으로써 스니핑 공격에 암호화된 부분 데이터만 노출하여 정보 유출의 가능성을 감소한다. 스니핑 공격에 의한 정보 유출 가능성 감소의 정도는 시뮬레이션을 이용하여 전체 데이터를 단일 경로로 전송하는 경우와 비교한 실험 결과를 통하여 나타내 보이며, 해당 경로의 선택을 위한 알고리즘은 이론의 증명을 통해 나타내 보인다.

  • PDF

CAD Allegro을 이용한 환경 자동실행으로 PCB작업시간 단축에 대한 연구 (A study on pcb lead time reduction with the automatic start of environment designing cad allegro)

  • 이상호;김영길
    • 한국정보통신학회논문지
    • /
    • 제16권6호
    • /
    • pp.1204-1208
    • /
    • 2012
  • 휴대폰 및 카메라 산업의 급속한 발전에 따라 모든 전자 제품이 소형화, 고성능화, 다양화 추세에 따라 PCB도 고집적화, 다층화, 고사양화가 급속히 이루어지고 있다. 현재 계속해서 진화하고 발전하는 디지털 카메라 그 중에서도 DSLR카메라 이외에 소형, 경량화 하는 고객 요구로 부터 탄생한 미러리스 카메라와 하이브리드 디지털 카메라의 시장이 계속해서 증가하고 있다. 그에 고사양, 저전력, 고성능 부품에 따라 PCB설계 난이도가 점차 증가하고 설계 L/T이 오래 걸리고 있다. 본 논문에서는 디지털 카메라 개발기간 및 제조기간 축소에 적용되는 PCB설계 L/T 단축에 대한 방법을 제안한다.

근대건축공간의 생태적 디자인 특성에 관한 연구 (A Study on the Characteristics of Ecological Design in Modern Architecture space)

  • 이윤희
    • 한국실내디자인학회논문집
    • /
    • 제14권5호
    • /
    • pp.52-61
    • /
    • 2005
  • Ecological traces appearing in contemporary architecture are based on modern architecture and most aspects on the contemporary architecture are related with the successive trend or break of the modern architecture. The concept of environment in the modern age has established clear destination, as it has been considered as nature. The architecture under a mechanical world view in the modem age has sustained the opposing connection with nature as environment. However, there have been architects maintaining the sympathy with nature in that vortex. This trend has been regarded as same context as ecological architecture and estimated to the outpost of ecological characteristics appearing in the contemporary architecture. This study is to make it clear that the ecological manifestation in the contemporary architecture is based on the ecology in the modem architecture through considering ecological ideals of architects in the modern architecture and considering space composition and structural properties in the modern architecture of ecological paradigm. The scope of this study contains spacial analysis, design strategy, and design types of organic architecture in nature, which has appeared from the modern age. First, the division into period is carried out according to the organic tendency of non-mainstream in the modern architecture: Arts and Crafts Movement, Art Nouveau, Sezession, Expressionism, Organic Architecture, Regionalism, Internationalism. Therefore, this study is significant to be on the search for a start to suggest ecological point of view to architectural space in modern architecture and is search organic characteristics for ecological characteristics in modern architecture; organic relation, thermal buffer space, regionalism, multi-layer, energy efficiency.

Optimization of particle packing by analytical and computer simulation approaches

  • He, Huan;Stroeven, Piet;Stroeven, Martijn;Sluys, Lambertus Johannes
    • Computers and Concrete
    • /
    • 제9권2호
    • /
    • pp.119-131
    • /
    • 2012
  • Optimum packing of aggregate is an important aspect of mixture design, since porosity may be reduced and strength improved. It may also cause a reduction in paste content and is thus of economic relevance too. Several mathematic packing models have been developed in the literature for optimization of mixture design. However in this study, numerical simulation will be used as the main tool for this purpose. A basic, simple theoretical model is used for approximate assessment of mixture optimization. Calculation and simulation will start from a bimodal mixture that is based on the mono-sized packing experiences. Tri-modal and multi-sized particle packing will then be discussed to find the optimum mixture. This study will demonstrate that computer simulation is a good alternative for mixture design and optimization when appropriate particle shapes are selected. Although primarily focusing on aggregate, optimization of blends of Portland cement and mineral admixtures could basically be approached in a similar way.