• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.405-409
• /
• 2004

We chose the Kushiro wetland in Hokkaido, Japan, as a test site to monitor wetland areas. Synthetic aperture radar (SAR) can carry out continuous observation in any weather conditions, and can therefore be used to observe high humidity areas such as wetlands. We applied multi-parameter SAR data (dual-frequency, multi-polarization, and multi-incidence angle) to monitoring the wetland forest. To find the optimum incidence angle and polarization for monitoring the wetland biomass, a simple backscattering model of wetland vegetation was developed and applied to estimate backscattering coefficients for different biomass and surface conditions.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.205-208
• /
• 1996

Multi-wavelength observing has been particularly fruitful in cool star research. There have been some well-observed examples, eg AB Dor, though ambiguity remains. This raises issues of data information content and model parameter determinacy, which are examined firstly in an optical context. We then widen the discussion to show how multi-site and multi-wavelength data can be combined to point to better constrained models. Particular cases, involving near-simultaneous radiometry and photometry, are discussed to clarify such modelling.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.76-79
• /
• 2008

This study presents the use of multi-temporal JERS-1 SAR images to the land cover classification. So far, land cover classified by high resolution aerial photo and field survey and so on. The study site was located in Non-san area. This study developed on multi-temporal land cover status monitoring and coherence information mapping can be processing by L band SAR image. From July, 1997 to October, 1998 JERS SAR images (9 scenes) coherence values are analyzed and then classified land cover. This technique which forms the basis of what is called SAR Interferometry or InSAR for short has also been employed in spaceborne systems. In such systems the separation of the antennas, called the baseline is obtained by utilizing a single antenna in a repeat pass

• Microbiology and Biotechnology Letters
• /
• v.18 no.1
• /
• pp.94-97
• /
• 1990

The restriction cleavage map of multi-copy recombinant plasmid, pJY502 (5.5 kb), carrying the thiostrepton resistance gene (tsr) was determined. Comparison of the restriction pattern with that of Streptomyces plasmids previously demonstrated that pJY502 was novel. The plasmid pJY502 had a broad host range in Streptomyces and contained single BgtII site for cloning purpose. Transformation frequency of pJY502 was $2.2 \times 10^5$ in S. lividans. E. coti-Streptomyces bifunctional plasmid, pJY504, was also constructed.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.475-478
• /
• 2007

This study presents the use of multi-temporal JERS-1 SAR images to extract the land cover information and possibility. So far, land cover information extracted by high resolution aerial photo and field survey. The study site was located in Non-san area. This study developed on multi-temporal land cover status monitoring and coherence information mapping can be processing by L band SAR image. From July, 1997 to October, 1998 JERS SAR images (9 scenes) coherence values are analyzed and then extracted land cover information factors, so on. This technique which forms the basis of what is called SAR Interferometry or InSAR for short has also been employed in spaceborne systems. In such systems the separation of the antennas, called the baseline is obtained by utilizing a single antenna in a repeat pass

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1346-1348
• /
• 2003

In this paper, the interferometric coherence was estimated and the amplitude intensity was extracted using the repeat-pass interferometric data, acquired by European Remote Sensing Satellite 1 and 2. Then discrimination and classification of surface land types in Zhangjiakou test site, Hebei Province were carried out based on the coherence estimation and the intensity extraction. Seven types of land were discriminated and classified, including in two different types of meadows, woodland, dry land, grassland, steppe and water body. The backscatter and coherence characteristics of these land types on the multi-temporal images were analyzed, and the change of surface features with time series was also discussed.

• Advances in concrete construction
• /
• v.5 no.1
• /
• pp.49-63
• /
• 2017

Traditional reinforced concrete slabs and beams are widely used for building. The use of flat slab structures gives advantages over traditional reinforced concrete building in terms of design flexibility, easier formwork and use of space and shorter building time. Deflection of the slab plays a critical role on the design and service life of building components; however, there is no recent research to explore actual deformation of concrete slab despite various advancements within the design codes and construction technology. This experimental study adopts the Hydrostatic Levelling Cells method for monitoring the deformation of a multi-storey building with flat slabs. In addition, this research presents and discusses the experimental results for the vertical deformation.

• Transactions of Materials Processing
• /
• v.31 no.1
• /
• pp.5-10
• /
• 2022

In multi-stage cold forging process, to enhance the productivity and product quality, in-site process monitoring technique by implanting sensors such as piezo-sensor and acoustic emission sensor has been continuously studied. For accurate analysis of the process, the selection of appropriate sensors and implantation positions are very important. Until now, in a multi-state forging machine, wedge parts located at the end of punch-set are used but it is difficult to analyze minute changes in die block-set. In this study, we also implanted sensors to the die part (die spacer) and compared signals from both sensors and found that sensing signals from die part showed enhanced process monitoring results.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1359-1363
• /
• 2009

The object of this research is to develop a simulation system for earthmoving operations in consideration of the impact of congestion in-between equipment and existing traffic flow around the site. The congestion in-between equipment and traffic flow affect work productivity. The conventional discrete event simulation, however, has limitations in simulating the flow of construction equipment. To consider the impact of congestion in-between equipment and existing traffic flow, in this paper, a multi-agent based simulation model that can realize characteristics of truck behavior more accurately to consider the impact of congestion was proposed. In this simulation model, multiple agents can identify environmental changes and adapt themselves to the new environment. This modeling approach is a better choice for this problem since it describes behavioral characteristics of each agent by sensing changes in dynamic surroundings. This study suggests a detailed system design of the multi-agent based simulation system.

• Tuberculosis and Respiratory Diseases
• /
• v.68 no.2
• /
• pp.80-86
• /
• 2010

Background: Recently, many institutions have acquired multi-detector computed tomography (MDCT) systems. This made it easier and more convenient to use MDCT as a initial diagnostic modality for hemoptysis. The purpose of this study was to evaluate the usefulness of MDCT before bronchoscopy and/or bronchial arterial embolization (BAE) for hemoptysis. Methods: We studied a total of 125 patients with hemoptysis who underwent, between 2006 and 2008, MDCT in a routine protocol before bronchoscopy and/or BAE. One hundred two patients underwent bronchoscopy and 29 patients underwent BAE. We compared the usefulness of MDCT and bronchoscopy for detecting the bleeding site and identifying the cause. We also evaluated our ability, using MDCT, to detect instances where the bronchial artery caused hemoptysis. Results: The rate of detection of a bleeding site was 75.5% on MDCT and 50.9% on bronchoscopy. MDCT and bronchoscopy detected the bleeding site in agreement in 62.7% of patients. MDCT alone found the bleeding site in 27.5% of cases. MDCT identified the cause of hemoptysis in 77.5% and bronchoscopy in 11.8%. In 29 patients who underwent BAE, we detected a total of 37 hypertrophied bronchial arteries that were causing hemoptysis. Of 37 bronchial arteries, 23 (62.2%) were depicted on MDCT. Conclusion: MDCT is superior to bronchoscopy for detecting the bleeding site and identifying the cause of hemoptysis. MDCT can also predict the side of affected bronchial artery with depiction of hypertrophied bronchial artery and localizing the bleeding site. Doing MDCT before bronchoscopy and BAE can provide a guideline for the next step.