• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.382-385
• /
• 2007

본 논문에서는 다중 표적의 중첩이라는 상황에 대한 새로운 해결 방식을 소개한다. 비선형 표적의 위치와 속도에 대한 추적을 중심으로 표적과 비표적의 중첩이 일어나는 순간 이후 분리되었을 때 추적중인 표적을 지속적으로 유지할 수 있는 방법에 대해 이야기 하고자 한다. 이 논문에서 제안된 알고리즘은 예측 명중위치 개념과 최대 잡음수준을 이용한 칼만필터 기반의 적응 상호작용 다중모델 기법으로 측정된 위치값과 예측된 명중위치 사이의 차이를 고려한 변형된 칼만필터 개념을 이용한다. 이 논문에서는 비선형 표적의 가속도를 시변 변수인 표적의 추가적인 잡음으로 두고 각각의 가속도 간격의 정도에 따라 얻어지는 모든 잡음에 대한 변수에 의해 각각의 하부 모델들을 특성화시켰다. 제안된 알고리즘은 표적의 운동특성에 따라 적응적으로 기법을 선택할 수 있는 선택적 방식을 구현하고자 한다. 표적의 기동중에 나타나는 가속도를 효과적으로 다루기 위하여 잡음의 크기가 급격히 증가하는 경우 그 증가분을 가속도로 인식하여 기동표적 관계식에 이용한다. 그리고 제안된 알고리즘의 수행 가능성을 보여주기 위하여 몇 가지 예를 제시하였다.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.7
• /
• pp.346-353
• /
• 2000

In this paper, a fuzzy logic controller is designed for position control of an Arage disk. The Arage disk system is an experimental set to exploit Arago's disk phenomenon which is the operation principle of induction motors. Since the Arage disk system operates in stable, maginally stable, and unstable regions, it is suitable as a test system to evaluate efficiency of various control system design methods. It is shown that the fuzzy logic controller shows good responses for multi-operating points of Arage disk system, while the controllers using linearized models are able to control the system on only one operating point.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.295-300
• /
• 2010

Recent researches of network structure are moving to high-level networks because there are already many research results of low-level network. Especially, current network services has been changed to the multimedia service using multicast routing such as IPTV(Internet Protocol Television) service. And then previous multicast services were provider oriented. So previous multicast structures were organized server/client model. But future multicast services will make user oriented services. Therefore there will be many service providers in the future. At this point, we study P2P network for supporting multi provider. So we research load balancing and contents lookup protocols in P2P network. In this paper, we propose network protocol and system based on super peer P2P for load balancing and efficiently service search. And we considered mobile environment for mobile IPTV.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.86-89
• /
• 1999

In this paper, we propose a new architecture of the fast symbol timing synchronization system which has some shared hardware blocks in order to reduce the hardware complexity. The proposed system consists of received power detector, correlation power detector using shared complex moving adders, and 2-step peak detector. Our system has detected FFT starting point within three Symbols using first two reference symbols of the frame in wireless ATM system. The new architecture was designed and simulated using VHDL. Our proposed architecture also detects a correct symbol timing synchronization within three symbols under a multi-path fading channel.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.569-572
• /
• 2003

The broadband wireless access industry, which provides high-tate network connections to stationary sites, has matured to the point at which it now has a standard for second-generation wireless metropolitan area networks. IEEE Standard 802.16, with its WirelessMAN air interface, set the stage for widespread and effective deployments worldwide. This paper presents an implementation of media access control that can be applied to BWA (Broadband Wireless Access) system. Medium access control (MAC) is a key issue in multi-access networks where a common channel is shared by many users. The designed MAC prototype roughly consists of MAC Hardware and MAC Software. The MAC Hardware part includes timing process, MAC transmission control, MAC reception control, and CRC/HCS process. The MAC Software part includes control of MAC signaling, network interface, and Physical (PHY) control. The designed MAC protocol will be integrated with the PHY of BWA in future and we can test overall system performance of MAC and PHY.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.6 no.2
• /
• pp.31-38
• /
• 2006

An architect for Cultural Technology have the most obligation to improve the cultural inheritance into an industrial resources. From an esthetical point of view, it is possible to put digital contents to a multiplicity of practical usage in the moment of its' digital conversion. These are practical resources out of an only duplication from the original. Developing cultural archetype into the most suitable model for one-source multi-use that is the core of the project. If you want to change an archetype, a Korean traditional architecture, into a creative source, you should develope a reappearance and a practical model harmonized with the image set. In addition, development process of cultural archetype digital contents based on ultimate idea and imagnation in our architectural culture, referred from cultural archetype and digital contents technology was offered by the study.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.220-228
• /
• 1995

An optimized 4-stage 12-bit pipelined CMOS analog-to-digital converter (ADC) architecture is proposed to obtain high linearity and high yield. The ADC based on a multiplying digital-to-analog converter (MDAC) selectively employs a binary-weighted-capacitor (BWC) array in the front-end stage and a unit-capacitor (UC) array in the back-end stages to improve integral nonlinearity (INL) and differential nonlinearity (DNL) simultaneously whil maintaining high yield. A digital-domain nonlinear error calibration technique is applied in the first stage of the ADC to improve its accuracy to 12-bit level. The largest DNL error in the mid-point code of the ADC is reduced by avoiding a code-error symmetry observed in a conventional digitally calibrated ADC is reduced by avoiding a code-error symmetry observed in a conventional digitally calibrated ADC is simulated to prove the effectiveness of the proposed ADC architecture.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.701-702
• /
• 2008

An adaptive response surface method with Latin Hypercube sampling strategy is employed to optimize a magnet pole shape of large scale BLDC motor to minimize the cogging torque. The proposed algorithm consists of the multi-objective Pareto optimization and (1+${\lambda}$) evolution strategy to find the global optimal points with relatively fewer sampling data. In the adaptive RSM, an adaptive sampling point insertion method is developed utilizing the design sensitivities computed by using finite element method to get a reasonable response surface with a relatively small number of sampling points. The developed algorithm is applied to the shape optimization of PM poles for 6 MW BLDC motor, and the cogging torque is reduced to 19% of the initial one.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1706-1711
• /
• 2008

This paper proposes a new Web based-control concept & design method and implementation of LonWorks network system for a large scale renewable energy energy control and monitoring system in building. The Experimental LonWorks network system using LonWorks/Ethernet(Web) server is designed and fabricated. This article addresses issues in architecture of LonWorks/Ethernet sever, embedded processors architecture for converting LonTalks protocol to Modbus protocol and software, and Internet technologies. It is also verified that the multi-induction motor control and monitoring system using LonWorks/Ethernet server have available, interoperable, reliable performance characteristics from the experimental results, Especially, The seamless integration of TCP/IP networks with control networks allows access to any control point from anywhere. Thus, the results provide a available technical data for remote distributed control system of industrial and buildings field.

• Tunnel and Underground Space
• /
• v.4 no.3
• /
• pp.297-304
• /
• 1994

This study aimed at analysis of induced stress and deformation behavior in rock mass around coal seams of Sam Chuck coal mine. For this study Vibrating Wire Stressmeters and Multi-point Borehole Extensometers were installed in the area of coal shale near coal seams. Induced stress and displacement in this area were coutinuously increased for 6 days from the begining of measurement, and then converged. But induced stress and displacement occurred when there were another openings by tunnelling and mining. The value of final induced stress was 21.8kgf/$\textrm{cm}^2$, displacement of rod extensometer was 1.3 mm at arch. Especially, over 1 mm of displacement between E2 and E3 in rod extensometer was measured.