• 융합신호처리학회논문지
• /
• 제14권1호
• /
• pp.39-44
• /
• 2013

본 논문에서는 멀티암(multi-arm) 스파이럴 안테나용 디지털 위상천이기(digital phase-shifter)를 힐버트 변환(Hillbert transform)을 이용하여 설계하였다. 힐버트 변환은 입력신호에 포함된 모든 주파수 성분을 $90^{\circ}$ 위상천이 시키며, 퓨리에 변환(Fourier transform)과 역퓨리에 변환(Inverse FIT)을 통해 구현된다. 디지털 위상천이기는 ADC(Analog-digital converter)로 샘플링된 입력신호에 힐버트 변환을 적용하여 위상차가 $90^{\circ}$인 두 신호를 생성하고, 이 두 신호를 이용하여 입력신호의 위상을 천이위상만큼 천이시키게 한다. 힐버트 변환 기반의 디지털 위상천이기는 Xilinx사의 System generator로 설계되었고, 입력 잡음, FFT 포인트 수, 샘플링 주기, 입력신호의 초기위상 및 천이 위상각 등에 따른 위상천이 성능을 시뮬레이션 하였으며, Matlab 결과와 비교하여 일치함을 확인하였다.

• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.184-189
• /
• 2018

최근에 안전기준과 환경규제 강화의 증대로 인해, 차체의 경량화에 대한 연구가 지속적으로 증가하고 있다. 고강도강의 응용은 가장 보편화 된 차체 경량화의 효과적인 방법 중에 하나이다. TWB(Tailor Welded Blank)는 다양한 두께와 용접을 사용하여 부분적인 강도와 경량화를 만족시키는 주요한 공법으로 활용되고 있다. 그러나 추가적인 용접공정으로 인해 판재간의 용접성이 중요하고 용접부에 대한 품질관리가 중요하다. 이점을 개선하기 위해, TRB(Tailor Rollded Blank)공법이 제안되었다. TRB는 롤러 압력을 조절하여 판재의 두께를 다르게 하고, 용접을 사용하는 TWB 공법보다 추가적인 용접공정이 없기 때문에 생산 비용적인 측면에서 훨씬 더 효율적이다. 본 연구에서는 Blank의 압연 영향을 조사하기 위해 스탬핑용 고강도강 TRB 판재의 성형성을 분석하였다. 성형성을 분석하기 위해, TRB 판재에서 0.8 mm, 1 mm의 두께를 갖는 부분을 채취하여 시험하였다. 시편에 새겨진 그리드마킹의 변형도를 분석하여 변형률을 조사하였고, 0.8 mm와 1.0 mm의 두께를 갖는 TRB 시편으로 Erichsen 시험을 한 후에 FE분석을 활용하여 성형성과 고유진동수를 비교하였다.

• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.361-374
• /
• 2020

Recently, small and medium-sized rahmen-type bridges have been developed as a technology that ensures the stability of structural behavior and the safety of use at the same time by using efficient and economical materials that make up the convergence section of reinforced bar, structural steel and concrete. This study is about a rahmen-type structure applied with the installation and dismantling of the strut. It improves the serviceability of the structure by forming multi-points and efficiently applies the convergence section of structural steel and concrete materials to the structural system changes to induce the displacement improvement effect additionally. By constructing mock-up models for the beam-column joint, the displacement was calculated and compared, and this was compared and analyzed by numerical analysis. The final displacement showed an improvement effect of 13.46% to 36.28% based on the vertical displacement of the existing structure without struts through the experiment of the mock-up models. As a result of analysis by numerical analysis method, the displacement improvement effect of 42.89% could be derived.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.121-124
• /
• 2006

Lightweight aggregate is mainly consist of multi-crystalline structure. It may be abnormal water moving by the change of external circumstance because of its specific portion being between components and aperture. So it has some difficulty in forming without concise method about absorbing character and water-containing point even though it is used to water-containing condition over the 24 hours of absorbing amount in present. This study has main idea on the characteristics of absorption on the pressurization of lightweight aggregate.

• 천문학회보
• /
• 제41권1호
• /
• pp.66.3-66.3
• /
• 2016

We report preliminary results from our analyses on the star-forming galaxies in the Herschel/SPIRE survey data over the AKARI/NEP-Wide Field. In this work, we utilize a combination of the SPIRE point source catalogue containing ~ 4,800 sources distributed over the wide (5.6 sq. deg) field and the spectroscopic redshift (zSPEC) data for 1790 selected targets obtained by MMT/Hectospec and WIYN/Hydra. Our analyses take advantages of multi-wavelengths photometric data (28 bands at most) covering from u* to $500{\mu}m$ band as well as continuous MIR wavelengths sampling by AKARI and WISE (4 to $25{\mu}m$). Various physical properties such as total infrared luminosity (LTIR), star formation rate (SFR), and luminosity functions (LFs) will be presented.

• 한국정보통신학회논문지
• /
• 제18권9호
• /
• pp.2109-2116
• /
• 2014

본 논문은 무선랜 시스템에서 성능 향상을 위해, 안테나 빔을 전 방향으로 방사하는 기존의 방법과는 달리, 접속한 단말이 존재하는 방향으로만 안테나 빔을 방사하는 빔포밍 시스템을 설계 및 구현하였다. 해당 시스템은 패치형 배열 안테나를 통해 통신을 하며, DSP(Digital Signal Processor)에서 패킷 타입과 단말의 정보를 퀄컴사의 상용 칩으로부터 제공받아 FPGA(Field Programmable Gate Array)로 전송하는 방식으로 동작한다. DSP와 FPGA의 통신 방식은 데이터 송수신시 생기는 지연을 최소화하기 위해 PCI express(Peripheral Component Interconnect express)를 사용하였다. 단말 고유의 MAC(Media Access Control) 주소를 FPGA에서 저장하고 데이터베이스화함으로써 단말들의 위치를 관리할 수 있도록 하였다. 따라서 해당하는 단말로 패킷을 전송할 때, 추정한 위치로 빔을 방사하여 T/P(throughput)를 높일 수 있다. 단말의 위치는 패치형 배열 안테나를 통해 수신한 단말의 SINR(Signal to Interface plus Noise Ratio)을 프리앰블 구간에서 극대화하는 알고리즘을 사용하여 추정하였다. 제안하는 빔포밍 시스템을 Verilog HDL(Hardware Description Language)을 이용하여 FPGA와 퀄컴사의 상용 칩과 연동하여 구현하였으며 실제 운용 환경에서 시험을 통해 구현된 장비가 일반 AP(Access Point) 보다 더 높은 성능을 보이며 통신하는 것을 확인하였다.

• Design & Manufacturing
• /
• 제14권4호
• /
• pp.65-70
• /
• 2020

Partial reinforcement of sheet metal parts with CFRP patch is a technology that can realize ultra-lightweight body parts while overcoming the high material cost of carbon fiber. Performing these patchworks with highly productive press equipment solves another issue of CFRP: high process costs. The A-pillar is the main body part and has an undercut shape for fastening with other parts such as roof panels and doors. Therefore, it is difficult to bond CFRP patches to the A-pillar with a general press forming tool. In this paper, a flexible system that applies uniform pressure to complex shapes using ceramic particles and silicone rubber is proposed. By benchmarking various A-pillars, a reference model with an undercut shape was designed, and the system was configured to realize a uniform pressure distribution in the model. The ceramic spherical particles failed to realize the uniform distribution of high pressure due to their high hardness and point contact characteristics, which caused damage to the CFRP patch. Compression equipment made of silicone rubber was able to achieve the required pressure level for curing the epoxy. Non-adhesion defects between the metal and the CFRP patch were confirmed in the area where the bending deformation occurred. This defect could be eliminated by optimizing the process conditions suitable for the newly developed flexible system.

• 조명전기설비학회논문지
• /
• 제28권10호
• /
• pp.16-26
• /
• 2014

This paper proposes new 13-level inverter topology and DC/DC converter buck-boost structure topology for multilevel, compounding uni-directional and bi-directional switches, and proposes high-efficient multilevel inverter system in which the proposed two PCS(Power Conditioning System) was connected in series. In proposed multilevel inverter of forming a output 13-level phase voltage by using total 18 switching parts, Then bi-directional switch has a characteristic of reducing conduction loss and controlling the reactive power effectively by separating electrically from the neutral point. DC/DC converter for supplying in dependent 3 DC voltage to the proposed multi-level inverter generates 180-degree phase shifted PWM by the symmetrically combined structure of 2 buck-boost converter and twice switching frequency efficiency can be obtained, meanwhile, the converter can step up/down the output voltage and 20% output can be generated comparing the input voltage. This proposed system is verified with the simulation and laboratory test.

• 대한기계학회논문집A
• /
• 제30권6호
• /
• pp.653-661
• /
• 2006

Metallic sandwich plates with various inner cores have important new features with not only ultra-light material characteristics and load bearing function but also multifunctional characteristics. Because of production possibility on the large scale and a good geometric precision, sandwich plates with inner dimpled shell structure from a single material have advantages as compared with other solid sandwich plates. Inner dimpled shell structures can be fabricated with press or roll forming process, and then bonded with two face sheets by multi-point resistance welding or adhesive bonding. Elasto-plastic bending behavior of sandwich plates have been predicted analytically and measured. The measurements have shown that elastic perfectly plastic approximation can be conveniently employed with less than 10% error in elastic stiffness, collapse load, and energy absorption. The dominant collapse modes are face buckling and bonding failure after yielding. Sandwich plates with inner dimpled shell structure can absorb more energy than other types of sandwich plates during the bending behavior.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권11호
• /
• pp.381-391
• /
• 2020

This research article investigates the way eWOM in social media influences the formation of destination image through development of trust and satisfaction for the potential tourist. The research involved administering an 18-point questionnaire taking online reviews, tourist involvement, and eWOM, destination image components of trust and satisfaction as variables. Data was collected from 554 individuals forming a cross-section of social media users and analyzed using multi-variate techniques (Reliability, CFA, and SEM). Results indicate a positive and significant relationship between all except online review and destination trust and satisfaction. Indirect and direct effects indicate that eWOM fully mediates the relationship between destination satisfaction and involvement and partially mediates the relationship between destination trust and involvement. In the case of online reviews, eWOM acts as a full mediator between destination trust and destination satisfaction for the future traveler using social media. The study proposes that components of image vary depending upon the degree of involvement, volume online reviews and eWOM generated also termed as 'virality' and these in turn influence the intention to revisit or recommend a destination. The study highlights its utility for National Tourist Organizations (NTOs) and online travel intermediaries to enhance destination marketing efforts.