• Title/Summary/Keyword: Multi-plug

Search Result 68, Processing Time 0.037 seconds

Design and Implementation a Remote Control Smart Multi-plug based on Wireless Network (무선 네트워크 기반 원격제어 스마트 멀티 플러그의 설계 및 구현)

  • Lee, Sang Hoon;Won, Hui Chul;Kim, Su-Yeon
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.20 no.4
    • /
    • pp.47-54
    • /
    • 2015
  • With the spread of smart technology, in the personal and office equipment, many of the products are equipped with smart features. These changes have opened the era that can enforce the user's operation from a remote location. In this study, we design and implement a smart multi-plug system to make a multi-plug installed in the home can be operated anytime and anywhere via wireless network technologies add smart feature to a multi-plug that can be seen easily around us, it is intended to complement the limitations of traditional multi-plugs. The smart multi-plug proposed in this paper, by operating the plug remotely from smart devices at anytime and from anywhere, is possible to provide services required for the weak users such as elderly and children, it is expected that the proposed system are widely used in the various areas requiring remote control of the power supply including u-Farming, terrarium, and smart home, and so on.

A Study on Separation Stability of The Umbilical Plug of A Store (발사체의 배꼽 플러그 분리 안정성 연구)

  • Kim, Yongil
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.22 no.4
    • /
    • pp.441-451
    • /
    • 2019
  • When a store is launched, the umbilical plug should be separated from the launcher without any physical interference and fragments. In order to satisfy these conditions, an umbilical plug and an umbilical separating device were designed. The plug is separated from the receptacle of the store while moving along inclined planes by the store thrust and the spring force connected from the launcher to the plug. As a result of the prototype test, the hanger on the store collided with the plug. Several tests were conducted after some actions were taken to prevent the collision. However, not only the same phenomenon was repeated, but also fragmentation occurred. In this study, the non-colliding conditions were analyzed through rigid and flexible multi-body dynamics analysis.

Multi-Service Multi-Plug-In Switching System (멀티서비스 멀티플러그인 교환 시스템)

  • 이정규;김영부
    • Proceedings of the IEEK Conference
    • /
    • 1999.06a
    • /
    • pp.145-148
    • /
    • 1999
  • The ability to rapidly create and deploy new and novel services in response to market demands will be the key factor in determining the success of the future service provider. This goal may be approached from different directions. One of them is an open interface making the functionalities of a network element programmable and usable by outside entities. In this paper, we describe several aspects of this new, hot technical area and introduce related standard activities. In addition, we present a new switching system called MSMP (Multi-Service Multi-Plug-In), which is based on the open programmable interface concept, and describe its architecture and main functionalities of its components.

  • PDF

A Study of Recognition-Based user Multi-Smart Plug System (사용자 인식 기반 멀티-스마트 플러그에 관한 연구)

  • Oh, Jin-Seok;Lee, Hunseok
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.12
    • /
    • pp.2976-2983
    • /
    • 2013
  • Interest in reducing standby power is increasing because of electric power shortages. Most of electric equipment are in standby state that does not use a function of the original, most electronic devices consume a lot of electric power even in standby mode. In many countries, research on the smart plug is advanced in order to prevent power consumption due to standby state. However, due to the nature of the function, expensive in many case. These smart plugs would be to cut the standby power using motion detecting sensor or pattern control of the user. Theses features have no advantages because of malfunction of motion detecting sensor and in accordance with the diversification ot user's pattern. In this study, developing a multi-smart plug system that linked with bluetooth function of user's smart phone. Using smart phone bluetooth function, determination of the position of the user. The suggestion smart plug cutting the standby power of the electronic apparatus. It was confirmed that it is able to reduce the power consumption according to the location of the user.

Ignitability and Combustion Characteristics of Lean Mixture by Multi-Point Ignition (희박혼합기에 대한 다점점화의 점화능력 및 연소특성)

  • ;;;Lee, Sang Joon;Han, Sung Bin;Lee, Jong Tai
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.19 no.10
    • /
    • pp.2607-2616
    • /
    • 1995
  • The influences of number of spark plug on ignitability, combustion characteristics and combustion promotion effect were examined to establish the design conception of spark ignition system for lean burn. Ignitability was increased remarkably by increasing of number of spark plug at combustion wall. Combustion duration was shortened and maximum combustion pressure was increased in accordance with increasing of spark plug number. Rate of overall combustion promotion considered of combustion duration and combustion pressure was 28% in two point ignition and 40% in four point ignition. It was verified that heat release, heat loss and combustion duration were affected by flame area, heat transfer area and maximum flame travel distance respectively.

Multi-Objective Optimal Predictive Energy Management Control of Grid-Connected Residential Wind-PV-FC-Battery Powered Charging Station for Plug-in Electric Vehicle

  • El-naggar, Mohammed Fathy;Elgammal, Adel Abdelaziz Abdelghany
    • Journal of Electrical Engineering and Technology
    • /
    • v.13 no.2
    • /
    • pp.742-751
    • /
    • 2018
  • Electric vehicles (EV) are emerging as the future transportation vehicle reflecting their potential safe environmental advantages. Vehicle to Grid (V2G) system describes the hybrid system in which the EV can communicate with the utility grid and the energy flows with insignificant effect between the utility grid and the EV. The paper presents an optimal power control and energy management strategy for Plug-In Electric Vehicle (PEV) charging stations using Wind-PV-FC-Battery renewable energy sources. The energy management optimization is structured and solved using Multi-Objective Particle Swarm Optimization (MOPSO) to determine and distribute at each time step the charging power among all accessible vehicles. The Model-Based Predictive (MPC) control strategy is used to plan PEV charging energy to increase the utilization of the wind, the FC and solar energy, decrease power taken from the power grid, and fulfil the charging power requirement of all vehicles. Desired features for EV battery chargers such as the near unity power factor with negligible harmonics for the ac source, well-regulated charging current for the battery, maximum output power, high efficiency, and high reliability are fully confirmed by the proposed solution.

Design of the In-pile Plug Assembly and the Primary Shutter for the Neutron Guide System at HANARO (하나로 냉중성자 유도관 시스템을 위한 인파일 플러그 및 주개폐기의 설계)

  • Shin, Jin-Won;Cho, Young-Garp;Cho, Sang-Jin;Ryu, Jeong-Soo
    • Proceedings of the KSME Conference
    • /
    • 2007.05a
    • /
    • pp.1585-1589
    • /
    • 2007
  • The HANARO, a 30 MW multi-purpose research reactor in Korea, will be equipped with a neutron guide system, in order to transport cold neutrons from the neutron source to the neutron scattering instruments in the neutron guide hall near the reactor building. The neutron guide system of HANARO consists of the in-pile plug assembly with in-pile guides, the primary shutter with in-shutter guides, the neutron guides in the guide shielding room with dedicated secondary shutters, and the neutron guides connected to the instruments in the neutron guide hall. The functions of the in-pile plug assembly are to shield the reactor environment from a nuclear radiation and to support the neutron guides and maintain them precisely oriented. The primary shutter is a mechanical device to be installed just after the in-pile plug assembly, which stops neutron flux on demand. This paper describes the mechanical design of the in-pile plug assembly and the primary shutter for the neutron guide system at HANARO. The design of the guide shielding assembly for the primary shutter and the neutron guides is also presented.

  • PDF

Effect of the Configuration of Plasma Jet Plug on Combustion Characteristics in a Constant Volume Vessel (플라즈마 제트 플러그의 형상이 정적연소기내 연소특성에 미치는 영향)

  • Kim, Munheon;Yoo, Hoseon;Oh, Byungjin;Park, Jungseo
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.23 no.5
    • /
    • pp.593-602
    • /
    • 1999
  • This paper presents combustion characteristics of LPG-air mixture ignited by the plasma jet in a cylindrical vessel with constant volume, in which our focus is placed on the multi-hole plug configuration. Four types of the plug configuration depending on the number of orifice and the arranged angle are considered, along with two cases of conventional spark ignition for comparison. Not only the flame propagation is photographed at intervals, but the pressure in the combustion chamber is also recorded through the entire combustion process. The results show that the plasma jet ignition enhances the overall combustion rate remarkably in comparison to the spark ignition by generating irregular flame front and penetrating through the unburned mixture. The combustion enhancement rate agrees favorably with the available data, which supports the validity of our experiment. Synthetically estimating, the two-hole sixty-degree plug appears to be the most desirable, in that the maximum pressure as well as the combustion duration is less affected by the sub-energy level than the others. It is also deduced that there may exist an optimal plug configuration capable of rapid combustion for a specific combustion chamber.

A Case Study of Measuring and Analyzing Electric Energy Usage in University Facilities Using Smart Plug (스마트플러그(IOT)를 이용한 대학시설의 전기에너지 사용량 계측 및 분석 사례 연구)

  • Park, Jun-Young;Lee, Chun-Kyong;Park, Tae-Keun
    • Journal of the Architectural Institute of Korea Structure & Construction
    • /
    • v.34 no.9
    • /
    • pp.27-34
    • /
    • 2018
  • The purpose of this study is to demonstrate and analyze the function of a Smart Plug before and after it is applied on the electrical appliances by controlling standby power usage. The research measures and analyzes the amount of electrical energy used while activating the Smart Plug with two types of appliances in a university facilities. The smart plugs were applied into a Group 1 appliances (Multi-function device, computer, laptop, Air con) which completely hinder the standby power, and a Group 2 appliances (Refrigerator, cold and hot water dispenser) which does not completely hinder the standby powers due to the characteristics of the function. First, the total standby power saving of all electrical appliances (Group 1 and Group 2) using the Smart plug was measured as 4.59%. Second, the energy saving of the Group 1 products was analyzed as 26.43%. Third, the standby power saving of the air conditioners from mid October to early December was measured as 31.06%, during the seasons when air conditioning was not actively in use. The research indicates that all specified appliances did have better energy efficiency with the Smart plug regardless of the amount of energy usage.

A Study of Hot Metal Extru-Bending Process

  • Jin In-Tai
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 2002.11a
    • /
    • pp.63-70
    • /
    • 2002
  • The purpose of the present study is to propose a new way of manufacturing curved metal tubes with arbitrary sections and way of eliminating the conventional bending defects such as thinning and thickening, in the wall of tube, distortion of the section, and wrinkling and folding on the surface by the extrusion bending process that can extrude and weld together one or more billets inside dies cavity, and can bend them during extrusion due to the gradient of extrusion velocities controlled by the eccentricity of the cavity sections between the entrance and the exit of the eccentric conical extrusion bending dies and conical plug, or by the relative size of the holes of multi-hole container, or by the relative moving velocity of multi-punches.

  • PDF