• Nuclear Engineering and Technology
• /
• 제51권8호
• /
• pp.1998-2004
• /
• 2019

The Multi-Physics (MP) instrument is one of 20 neutron spectrometers planned in the China Spallation Neutron Source (CSNS). This paper presents a shielding calculation for the MP instrument using Monte Carlo codes MCNPX and FLUKA. First, the neutrons that escape from the CSNS decoupled water moderator and are delivered to the beam line of the MP instrument are calculated to use as the source term of the shielding calculation. Then, to validate the calculation method based on multiple variance reduction techniques, a cross check between MCNPX and FLUKA codes is performed by comparing the calculation results of the dose rate distribution on a simplified beam line model. Finally, a complete geometry model of the MP instrument is set up, and the primary parameters for the shielding design are obtained according to the calculated dose rate map considering different worst-case scenarios.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.877-883
• /
• 2019

Superconducting multi-spoke cavities are outstanding alternative choice for acceleration of heavy ions in medium velocity regimes. Based on the scheme of China ADS, several researches on the superconducting double-spoke cavities were done and two prototype cavities have been developed. In this paper, the RF design, the mechanical design and fabrication considerations of the bare cavity will be described in detail. After Buffered Chemical Polishing and High Pressure Rinsing, one of the prototype cavities was installed into the Vertical Test Stand for high gradient RF testing at 4.2 K. The measurement results of the quality factor as a function of the accelerating field and the maximum surface field will be presented. An accelerating gradient of more than 15 MV/m is achieved during the test, with maximum surface electric field of 58 MV/m, and maximum surface magnetic field of 117 mT.

• 한국방재학회 논문집
• /
• 제9권2호
• /
• pp.1-9
• /
• 2009

물-결합재비 0.4이하의 고성능 콘크리트 수축 변형을 파악하기 위해 전체 수축을 수분의 외부이동에 의한 건조수축과 수분의 내부소모에 의한 자기수축으로 분리한 후, 자기건조에 의한 상대습도 변화와 변형률의 관계를 묘사하기 위하여 계면역학적 접근법에 의한 습도-변형률 관계를 설정하였다. 이에 대한 검증을 위해 자기수축 시험체에서의 습도-수축 측정을 수행하였으며, 기존 연구 모델인 Tazawa, CEB-FIP 모델에 비하여 측정값과 가장 유사한 결과를 나타내어 본 연구에서의 자기수축모델은 자기건조에 따른 자기수축은 선형성을 나타내는 수분의 외부이동에 의한 수축과는 달리 지수적 관계를 갖는 특성과 초기재령에서의 급속한 자기수축 발현 특성을 적절히 묘사하고 있음을 알 수 있었다. 이 후 본 연구의 수분이동-수축 모델을 반영하여 온도, 수분이동, 변형률 해석의 다중물리 모델 해석과 모형시험체 측정을 수행한 결과 매우 유사한 값을 나타내어 본 연구를 통해 측정된 수분의 내부소모에 의한 습도와 수축변형률을 고려한 다중물리모델은 타당할 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3604-3613
• /
• 2022

The Physical Protection System (PPS) plays an important role and must effectively deal with various adversary attacks in nuclear security. In specific single adversary path scenarios, we can calculate the PPS effectiveness by EASI (Estimated Adversary Sequence Interruption) through Probability of Interruption (P_I) calculation. EASI uses a single value of the probability of detection (P_D) and the probability of alarm communications (P_C) in the PPS. In this study, we develop a multi-path analysis code based on EASI to evaluate the effectiveness of PPS. Our quantification method for P_I considers the variability and uncertainty of P_D and P_C value by Monte Carlo simulation. We converted the 2-D scheme of the nuclear facility into an Adversary Sequence Diagram (ASD). We used ASD to find the adversary path with the lowest probability of interruption as the most vulnerable paths (MVP). We examined a hypothetical facility (Hypothetical National Nuclear Research Facility - HNNRF) to confirm our code compared with EASI. The results show that implementing the variability extension can estimate the P_I value and its associated uncertainty. The multi-path analysis code allows the analyst to make it easier to assess PPS with more extensive facilities with more complex adversary paths. However, the variability of the P_D value in each protection element allows a significant decrease in the PI value. The possibility of this decrease needs to be an important concern for PPS designers to determine the P_D value correctly or set a higher standard for PPS performance that remains reliable.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1443-1446
• /
• 2005

We have synthesized thin multi-walled carbon nanotubes (t-MWCNTs) using a catalytic chemical vapor deposition (CCVD) method with FeMoMgO catalyst. The number of tube walls were 2 ${\sim}$ 6 with the corresponding diameters of 3 ${\sim}$ 6 nm. We obtained high production yield of over 3000 wt% compared to the weight of the supplied catalyst. These t-MWCNTs revealed the intermediate structural characteristics between single- and multi-walled carbon nanotubes (SWCNTs and MWCNTs). We have also characterized the field emission properties such as turn-on field and emission current, and current degradation from these t-MWCNTs together with SWCNTs and MWCNTs.

• 한국진공학회지
• /
• 제12권S1호
• /
• pp.28-32
• /
• 2003

Both $LiNbO_3$ and $KTiOPO_4$ samples were implanted with 350 keY $H^+$ and $He^+$ ions at different doses ranging from $1 ${\times}$\times10^{16}$ to of $5 ${\times}$\times10^{16}$ ions/$\textrm{cm}^2$. Single and multi-energy implantations were performed at room temperature. Mono-mode or a few modes in both $LiNbO_3$ and $KTiOPO_4$ waveguides were observed. The effect of temperature on the refractive index profiles of $LiNbO_3$ and $KTiOPO_4$ waveguids was studied. The temperature covered from room temperature, $200^{\circ}C$, 194.5 K (dry ice) and 77K (liquid nitrogen). Different mechanisms are needed to interpret the observed behavior. A n, increased mono-mode $LiNbO_3$ waveguide was formed by multi-energy keV $He^+$ ions.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2251-2260
• /
• 2021

The motion control of the divertor maintenance system of the China Fusion Engineering Test Reactor (CFETR) was studied in this paper, in which CFETR Multi-Functional Maintenance Platform (MFMP) was simplified as a parallel robot for the convenience of theoretical analysis. In order to design the motion controller of parallel robot, the kinematics analysis of parallel robot was carried out. After that, the dynamic modeling of the hydraulic system was built. As the large variation of heavy payload on MFMP and highly nonlinearity of the system, A Fuzzy-PID controller was built for self-tuning PID controller parameters by using Fuzzy system to achieve better performance. In order to test the feasibility of the Fuzzy-PID controller, the simulation model of the system was built in Simulink. The results have showed that Fuzzy-PID controller can significantly reduce the angular error of the moving platform and provide the stable motion for transferring the divertor.

• 전기전자학회논문지
• /
• 제20권1호
• /
• pp.94-102
• /
• 2016

본 논문에서는 기계학습 알고리즘을 이용하여 다중물리(Multi-physics) 시뮬레이션의 반복 횟수를 획기적으로 줄일 수 있는 다중물리해석 예측 방법을 제안한다. 기존의 다중물리해석 시뮬레이션의 경우 소요되는 시간과 노력을 줄이기 위해 시뮬레이션 자체에 대한 방법과 환경 개선에 초점이 맞추어져 있으나 본 논문에서는 다중물리 시뮬레이션 결과를 기계학습 알고리즘으로 학습하여 추가적인 시뮬레이션을 수행하지 않고 학습된 기계학습 알고리즘을 사용하여 수십분에서 수시간에 걸리는 다중 물리 해석과 유사한 결과를 수초 내에 예측할 수 있음을 보였다. 기계학습 알고리즘 간의 성능을 비교하여 다중물리해석에 적합한 기계학습 알고리즘을 확인하였으며 가장 우수한 성능을 보인 가우시안 프로세스 회귀(Gaussian Process Regression)의 경우 100개 이하의 학습 샘플만으로도 우수한 예측 결과를 얻어낼 수 있음을 확인하였다. 제안하는 방식을 통해 시뮬레이션을 하고자 하는 모델의 형상이나 재질이 변경될 경우 기존의 시뮬레이션 결과로 학습된 알고리즘이 있다면 시뮬레이션을 반복 수행하기 전에 알고리즘을 이용하여 결과를 예측할 수 있어 시뮬레이션의 반복 횟수를 줄일 수 있을 것으로 기대한다.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.43-48
• /
• 2013

In this paper, magnetic buoyancy force on nonmagnetic solid object submerged in magnetic liquid was simulated and measured. For the evaluation of the force, a multi-physics approach of hydrostatic equilibrium considering magnetic body force as well as gravity is presented. The magnetic body force should be regarded as an additional forcing term in the momentum equation of hydrodynamics. It is also shown that the virtual air-gap based Kelvin's force formula is a useful method for the calculation of force distribution in the magnetic liquid. The experimental result which was performed by a load-cell measurement system agreed quantitatively well with the numerical one.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1436-1440
• /
• 2018

SiN and SiCN film production using plasma-enhanced atomic layer deposition (PE-ALD) is investigated in this study. A developed high-power and high-density multiple inductively coupled plasma (multi-ICP) source is used for a low temperature PE-ALD process. High plasma density and good uniformity are obtained by high power $N_2$ plasma discharge. Silicon nitride films are deposited on a 300-mm wafer using the PE-ALD method at low temperature. To analyze the quality of the SiN and SiCN films, the wet etch rate, refractive index, and growth rate of the thin films are measured. Experiments are performed by changing the applied power and the process temperature ($300-500^{\circ}C$).