• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.55-56
• /
• 2006

We investigated the diffraction grating efficiency by the DPSS laser beam wavelength to improve the diffraction efficiency on AsGeSeS & Ag/ AsGeSeS thin film. Diffraction efficiency was obtained from DPSS(532nm)(P:P)polarized laser beam on AsGeSeS, Ag/ AsGeSeS and AsGeSeS/Ag/AsGeSeS thin films. As a result, for the laser beam intensity, 0.24 mW, single AsGeSeS thin film shows the highest value of 0.161% diffraction efficiency at 300 s and for 2.4 mW, it was recorded with the fastest speed of 50 s, which the diffraction grating forming speed is faster than that of 0.24 mW beam. Ag/ AsGeSeS and AsGeSeS/ Ag/ AsGeSeS multi-layered thin film also show the faster grating forming speed at 2.4 mW and higher value of diffraction efficiency at 0.24 mW.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1753-1761
• /
• 2014

Due to the inherent inhomogeneous and anisotropy nature of the composite materials, the detection of internal defects in these materials with non-destructive techniques is an important requirement both for quality checks during the production phase and in service inspection during maintenance operations. The estimation of the time-of-arrival (TOA) and/or time-of-flight (TOF) of the ultrasonic echoes is essential in ultrasonic non-destructive testing (NDT). In this paper, we used split-spectrum processing (SSP) combined with matching pursuit signal decomposition (MPSD) to develop a dedicated ultrasonic detection system. SSP algorithm is used for Signal-to-Noise Ratio (SNR) enhancement, and the MPSD algorithm is used to decompose backscattered signals into a linear expansion of chirplet echoes and estimate the chirplet parameters. Therefore, the combination of SSP and MPSD (SSP-MPSD) presents a powerful technique for ultrasonic NDT. The SSP algorithm is achieved by using Gaussian band pass filters. Then, MPSD algorithm uses the Maximum Likelihood Estimation. The good performance of the proposed method is experimentally verified using ultrasonic traces acquired from three specimens of carbon fibre reinforced polymer multi-layered composite materials (CFRP).

• 한국전자파학회논문지
• /
• 제12권6호
• /
• pp.1002-1008
• /
• 2001

본 논문은 전파흡수기능을 갖는 경량, 고강도 고분자 복합재료의 재료 설계 및 전각흡수특성에 관한 연구이다. 전송선로 이론을 도입하여 다층구조 전파흡수체의 반사감쇠량 계산에 필요한 이론식을 제시하고, 각 층의 재료정수 및 두께의 함수로 계산한 전파흡수능 결과에 근거하여 각 층의 재질에 적합한 복합재료를 제시하였다. 본 연구에서 가장 중요한 결과는 페라이트 충진재를 사용하지 않은 3층 구조 (표면층/중간층/배면층)의 전파흡수구조재를 설계하였다는 점이다. 표면층 재료로는 저유전율 특성의 유리섬유 복합재료를 사용하고, 중간층 및 배면층에는 유전상수 및 도전손실이 큰 탄소섬유 복합재료를 사용하여 4~12 GHz 주파수 범위에서 10 dB 이상의 전파흡수특성을 얻을 수 있었다. 이에 반하여 흡수층/반사층으로 구성되는 2층 구조의 전파흡수구조재에서는 흡수층에 페라이트 충진재의 사용이 필수적이었다. 반사층 재질로 탄소섬유 복합재료를 사용하고, 횹수층 유리섬유 복합재료에 페라이트 충진재를 약 40 wt% 첨가함으로써 4~12 GHz 주파수 범위에서 10 dB 이상의 전파흡수특성을 얻을 수 있었다.

• Journal of Information Display
• /
• 제4권3호
• /
• pp.1-5
• /
• 2003

Laser-Induced Thermal Imaging (LITI) is a laser addressed patterning process and has unique advantages such as high-resolution patterning with over all position accuracy of the imaged stripes of within 2.5 micrometer and scalability to large-size mother glass. This accuracy is accomplished by real-time error correction and a high-resolution stage control system that includes laser interferometers. Here the new concept of hybrid system that complement the merits of small molecule and polymer to be used as an OLED; our system can realize easy processing of light emitting polymers and high luminance efficiency of small molecules. LITI process enables the stripes to be patlerned with excellent thickness uniformity and multi-stacking of various functional layers without having to use any type of fine metal shadow mask. In this study, we report a full-color hybrid OLED using the multi-layered structure consisting of small molecules and polymers.

• 한국분말재료학회지
• /
• 제27권4호
• /
• pp.333-338
• /
• 2020

In this study, we fabricate a thin- and dense-BCuP-5 coating layer, one of the switching device multilayers, through a plasma spray process. In addition, the microstructure and macroscopic properties of the coating layer, such as hardness and bond strength, are investigated. Both the initial powder feedstock and plasma-sprayed BCuP-5 coating layer show the main Cu phase, Cu-Ag-Cu₃P ternary phases, and Ag phase. This means that microstructural degradation does not occur during plasma spraying. The Vickers hardness of the coating layer was measured as 117.0 HV, indicating that the fine distribution of the three phases enables the excellent mechanical properties of the plasma-sprayed BCuP-5 coating layer. The pull-off strength of the plasma-sprayed BCuP-5 coating layer is measured as 16.5 kg/㎠. Based on the above findings, the applicability of plasma spray for the fabrication process of low-cost multi-layered electronic contact materials is discussed and suggested.

• Ecology and Resilient Infrastructure
• /
• 제9권4호
• /
• pp.228-236
• /
• 2022

하천의 안정성과 이용도를 높이기 위하여 설치하는 하천 호안이 최우선으로 여기는 가치는 홍수에 견딜 수 있는 치수적인 안전성 확보이다. 이러한 구조물은 물의 하천의 안정성을 확보하면서 호안의 세굴을 막기위해 설치된다. 기존에 하천에 설치된 호안 기술은 사석, 돌망태 및 콘크리트 등으로 구성되어 있다. 하지만 사석 및 돌망태 기술은 급격한 홍수로 인해 쉽게 유실 및 파괴되는 단점을 지니고 있으며, 콘크리트 기술은 소재의 안정성은 강하지만, 물속에 오랜 시간동안 존재할 경우 수생태계에 악영향을 미치는 강염기가 약 10년간 용출되고, 콘크리트 표면에 식생이 성장하지 못하기 때문에 환경 및 생태적인 이유로 문제가 되고 있다. 이에 피마자유에서 추출된 바이오폴리머 소재를 활용하여 다층다공성 하천호안보호기술을 개발하였으며, 한국건설기술연구원 안동하천실험센터에서 실규모 하천실험을 통해 수리학적 안정성 검토결과, 유속 8.0 m/s 및 최대 허용 소류력은 67.25 kg_f/m² (659.05 N/m²)에서 수리적인 안정성을 확인하였다.

• 한국정밀공학회지
• /
• 제27권2호
• /
• pp.34-39
• /
• 2010

In order to achieve and maintain dimensional accuracy in laser micro-machining, dominant parameters such as laser power and laser focus position need to be monitored and controlled real time. Also, in order to selectively machine multi-layered materials, the material being presently machined need to be recognized. This paper presents an auto-focusing (AF) module to keep laser focus on a large-area surface; a real-time laser power stabilizing module based on optical attenuation; and a laser-induced breakdown spectroscopy (LIBS) module. With these monitoring modules, position error in laser focus on a 4" silicon wafer was kept below $4{\mu}m$, initially $51{\mu}m$, and laser power stability of a UV laser source was improved from 1.6% to 0.3%. Also, the material transition from polyimide to copper in machining of FCCL (flexible copper clad laminate) was successfully observed.

• 복식문화연구
• /
• 제15권5호
• /
• pp.796-809
• /
• 2007

The viewpoint of growth pursuit is changed to that of life quality's and happiness' pursuit by modern people. Modern people in digital environment, tired of fast-changing and oppressive daily life, prefer well-being trend providing tranquility and relaxation. Well-being is related to digital, because negative influences of digital lead human-oriented, environment-friendly well-being design. Therefore the purpose of this study is to research and analyze the relation of well-being fashion design and digital environment through case study in contemporary well-being fashion design. The results of this study are as follows: 1. This study shows that the attributes of digital environment make up function-intensive, interactivity, mobility & nomad, human & emotion-oriented and environment-friendly. And this study shows the design characteristics of digital environment consist of function-intensive design by digital convergence, open structure design for interactivity, modular design for mobility & nomad, emotion-oriented & multi-sensory design and environment- friendly design. 2. Function-intensive design in modem well-being fashion composed of vogue of caports style(casual+sports), practical use of multi-functional new-healthy textiles, and popularity of many style's mixture at once. Open structure design consist of wrapover design, use of transparent materials. Modular design are layered styling, practical use of zipper and velcro. Emotion-oriented & multi-sensory design are constitute of fad of wrinkle materials, application of bright & vivid tone, personal color and family look. Environment-friendly design in contemporary well-being fashion are comprised in use of natural color, re-advent of natural floral motif and eco-design.

• Journal of the Korean Wood Science and Technology
• /
• 제28권3호
• /
• pp.1-8
• /
• 2000

본 연구는 미이용 자원인 소경목(小經木) 조생수(早生樹) 등의 저질원료로부터 고성능을 지니는 구조용 보드를 제조하는 기술을 개발하는 것을 목적으로 하여 할렬 스트랜드 (S)/파티클(P) 복합체의 층구조와 S와 P의 혼합비율을 바꾼 단면구성에 따른 기초적 물성을 검토했다. 그 결과 스트랜드층을 포함하고 있는 SP 복합체의 경우, 전체적으로 휨성능(MOR, MOE)이 매우 높았다. 또 S단층 보드는 현저한 이방성을 나타내었지만 층구조가 PB에 가까워질수록 이방성은 감소하여, 7층 구조의 복합체는 이방성이 적었으며 특히 SP7은 직교방향도 휨강도가 높았다. 습윤시 휨강도 성능도 같은 경향을 나타내었다. 박리강도(IB)는 PB가 가장 높았고, 스트랜드층을 가진 복합체는 거의 같은 값을 나타내었다. 두께팽창율(TS) 은 PB가 가장 적은 값을 나타내었으며, 표층이 P층인 구조가 S표층구조보다 적은 경향을 나타내었다. 복합체의 표면특성은 표층 엘리먼트의 영향을 받아, 적고 미세한 엘리먼트인 P표층의 복합체가 크고 두꺼운 S표층 복합체보다 양호하였다. S와 P의 혼합비율의 영향은, SP비(比)를 증가시켜도 강도물성(MOR, MOE, IB)은 향상되지 않으며, 오히려 저하되는 것도 있었다. 두께팽창율(TS)은 SP 비(比) 1:1 이상의 복합체에서는 S만으로 제조한 보드와 같은 정도의 값을 나타내었다.

• 대한금속재료학회지
• /
• 제47권12호
• /
• pp.811-818
• /
• 2009

In order to meet increasingly complex and rigorous technical specifications, extensive effort has been devoted to fabricate clad materials with multi-layered metal plates. In this study, novel stainless steel/aluminum/copper (STS/Al/Cu) three-ply clad materials were fabricated by a hot rolling process for cookware applications. The effect of the testing temperature on the mechanical properties of the clad materials and on each component metal was investigated during the tensile tests. The interface properties of the clad materials were also examined by optical microscopy (OM) and an electron probe micro-analyzer (EPMA). The best mechanical and interfacial properties for a warm working process were found in a sample annealed at a temperature of $300^{\circ}C$. For the sample annealed at $400^{\circ}C$, the results of the tensile test indicated that interface delamination occurred only in the region of the Al/Cu interfaces. This was due to the formation of the thick and brittle intermetallic compound of $Al_2Cu$ in the Al/Cu interface. In contrast, no interface delamination was observed in the STS/Al interface, most likely due to its strong bond strength.