• ETRI Journal
• /
• v.37 no.2
• /
• pp.369-379
• /
• 2015

Fault management of virtualized network environments using user-driven network provisioning systems (NPSs) is crucial for guaranteeing seamless virtual network services irrespective of physical infrastructure impairment. The network service interface (NSI) of the Open Grid Forum reflects the need for a common standard management API for the reservation and provisioning of user-driven virtual circuits (VCs) across global networks. NSI-based NPSs (that is, network service agents) can be used to compose user-driven VCs for mission-critical applications in a dynamic multi-domain. In this article, we first attempt to outline the design issues and challenges faced when attempting to provide mission-critical applications using dynamic VCs with a protection that is both user-driven and trustworthy in a dynamic multi-domain environment, to motivate work in this area of research. We also survey representative works that address inter-domain VC protection and qualitatively evaluate them and current NSI against the issues and challenges.

• Journal of Advanced Marine Engineering and Technology
• /
• v.12 no.2
• /
• pp.35-45
• /
• 1988

In this paper an experimental review of condition monitoring method using time domain vibration signals and statically measured wave forms of a multi-components damaged ball bearing is presented first time. Many investigators studied already about vibration characteristics of a single point damaged ball bearing but they did not make efforts to verify vibration phenomena of a multi-components damaged one. Even in case of a tripple components damaged (i.e, outer race, inner race and rolling element) one, the high frequency resonance technique (HERT) and the displacement time domain technique can be also used for its fault detection. According to experimental results undertaken a static displacement measuring method, the defect locations of components can be proposed confidently with simple calculation of the rotating angles of each component.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.151-152
• /
• 2015

Multi-terminal HVDC(MTDC) 시스템은 기존 전압형 HVDC 시스템이 갖는 능동적인 전력 조류 제어 및 불안정한 신재생에 너지원의 안정적 연계 기능을 극대화시킨 계통 구성 방식으로, 수퍼그리드의 구현에 가장 근접한 방식으로 각광받고 있다. 그러나 전압형 HVDC 시스템을 채택함으로써, 고장전류에 취약한 특징을 갖고 있으며 사고 구간의 분리를 위한 HVDC 차단기의 개발이 필수적으로 요구된다. 본 논문에서는, 추후 HVDC 차단기의 개발 및 적용을 위해 요구되는 MTDC시스템에서의 고장전류 특성 분석에 대한 내용을 기술하고 있다.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.74-77
• /
• 2014

This paper suggested an error control for multi-channel running on machine to machine environment. This system is suitable for recovering software fault for multimedia CSCW(Computer Supported Cooperative Works) based on machine to machine environment. It is necessary for the system to be protected by reactivity of media service instance instead of breaking process of session. This paper explains a performance analysis of an error recovery system of M2M based computing collaboration environment using rule-based DEVS modeling and simulation techniques.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.4
• /
• pp.71-79
• /
• 2016

This study proposes a performance model of a shared bus multi-processor system and analyzes the effect of input/output types on system performance and overload of shared resources. This system performance model reflects the memory reference time in relation to the effect of input/output types on shared resources and the input/output processing time in relation to the input/output processor, disk buffer, and device standby places. In addition, it demonstrates the contribution of input/output types to system performance for comprehensive analysis of system performance. As the concept of workload in the probability theory and the presented model are utilized, the result of operating and analyzing the model in various conditions of processor capability, cache miss ratio, page fault ratio, disk buffer hit ratio (input/output processor and controller), memory access time, and input/output block size. A simulation is conducted to verify the analysis result.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1052-1059
• /
• 2018

This paper deals with commutation failure of the line-commutated converter high voltage direct current (LCC HVDC) system caused by a three phase fault in the ac power system. An analytic calculation method is proposed to estimate the maximum permissible voltage drop at the LCC HVDC station on various operating point and to assess the area of vulnerability for commutation failure (AOV-CF) in the power system based on the residual phase voltage equation. The concept is extended to multi-infeed HVDC power system as the area of severity for simultaneous commutation failure (AOS-CF). In addition, this paper presents the implementation of a shunt compensator applying to the proposed method. An analysis and simulation have been performed with the IEEE 57 bus sample power system and the Jeju island power system in Korea.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.148-154
• /
• 2012

For a successful checkpointing strategy, we should place checkpoints so as to optimize fault-tolerance capability of real-time systems. This paper presents a novel scheme of checkpoint placement for real-time systems with periodic multi-tasks. Under the influence of transient faults, multi-tasks are scheduled by the Rate Monotonic (RM) algorithm. The optimal checkpoint intervals are derived to maximize the probability of task completion. In particular, this paper is concerned about the general case that the deadline of a task is longer than the period. Compared with the special condition that the deadline is equal to or less than the period, this general case causes a more complicate test procedure for schedulability of the RM algorithm with respect to a given set of checkpoint re-execution vectors. The probability of task completion is also derived in a more complex form. A case study is given to show the applicability of the proposed scheme.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.6
• /
• pp.305-312
• /
• 2018

Software has been used to develop many functions of the modern weapon systems which has a high mission criticality. Weapon system software must consider multi-threaded processing to satisfy growing performance requirement. However, developing multi-threaded programs are difficult because of concurrency faults, such as unintended data races. Especially, it is important to prepare analysis for debugging the data races, because the weapon system software may cause personal injury. In this paper, we present an efficient framework of analysis, called ConDeWS, which is designed to determine the scope of dynamic analysis through using the result of static analysis and fault analysis. As a result of applying the implemented framework to the target software, we have detected unintended data races that were not detected in the static analysis.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.548-550
• /
• 2013

Multipath routing is proposed to perform better load balancing and to provide high fault tolerance. In this paper common factors on multi-path routing for WMNs are discussed and joint multi-channel and multipath routing approaches for load balancing are introduced at the same time. The key issues on how to design an effective multi-path routing protocol with appropriate performance metrics for WMNs are also discussed through the case studies in the paper.

• The Journal of Korean Association of Computer Education
• /
• v.5 no.2
• /
• pp.21-28
• /
• 2002

This paper proposes a new approach to rollback-recovery using multi-agent in distributed computing system. Previous rollback-recovery protocols are dependent on inherent communication and operating system, which causes a decline of computing performance in distributed computing system. By using multi-agent, we propose rollback-recovery protocol that is independent on operating system. We define three kinds of agent. One is a recovery agent that performs rollback-recovery protocol after a failure. Other is an information agent that constructs domain knowledge as a rule of fault tolerance and information during failure-free operation. The other is facilitator agent that controls the efficient communication between agents. Also we propose rollback-recovery protocol using multi-agent and simulated the proposed rollback-recovery protocol using JAVA and agent communication language in CORBA environment.