• Analytical Science and Technology
• /
• v.17 no.5
• /
• pp.434-437
• /
• 2004

Alpha track technology can provide useful isotopic information of boron in the primary coolant water. In the quantitative analysis using the alpha track analysis, the shape or area of sample on the solid track detector becomes very important, especially for the analysis of liquid samples. In this research, a multi-dot plate has been developed for this purpose. The multi-dot plate provides fixed standard shape of the sample solution that stays inside of the printed circle, and consequently increases the reproducibility of the boron analysis.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.12 no.1
• /
• pp.43-55
• /
• 1994

To investigate relations between Grain-shape of plate and Dot-Gain in the lithography, Printing plates were made by Mechanical Grain, Brush Grain and Electrolytic Grain method.Fine multi-grain by electrolytic method of them resulted in less Dot-grain on the paper, more damping water on the none image part of printing plate.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1609-1612
• /
• 2006

The determination of the boron isotopic ratio in solutions was achieved by means of a solid state track detector by using an alpha track. The neutron flux was optimized by using a Cd-foil to find the optimum conditions for counting the number of alpha tracks on the selected solid detector caused by the (n, $\alpha$) nuclear reaction of boron. The home-made multi-dot detector plate was utilized in this study to increase the reproducibility of the measurement by uniformly drying the boron solution within the marked circle area on the detector plate. The experimental results of this study verified that the $^{11}B/^{10}B $ isotopic ratio can be measured by observing the number of alpha tracks for different concentrated standard solutions with various isotopic compositions. This technique was applied to the determination of $^{10}B$ enrichment factor in a biological sample for a boron neutron capture therapy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.667-673
• /
• 2015

A laser diode(LD) has been studied in many fields what medical, industrial processing, sensor, advertising equipment, printing equipment. And the LD is being used in industry. However, LD will require precision handling. Therefore, the actual use of LD is limited to areas of specialization. In this study, attend to the characteristics of the LD what weak to electrostatic and physical impact, current and heat. And will make a sample module that use comfortably a various wavelength LD. Furthermore, Furthermore, through the printing CTP(Computer to Plate) equipment used the 128-channel LD-Driver, compares it with a 64-channel CTP device about the print speed and resolution. And will solved the problem of delay between the dot and the dot. Finally, consider the potential of the 256-channel LD-Driver.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.3
• /
• pp.16-23
• /
• 2004

Thermally induced errors of machine tools have been recognized as one of the most important issues in precision machining. This is probably the most formidable obstacle to obtain high level of machining accuracy. To this regard, the experimental compensation methodologies such as software-based method or origin shift of machine tool axes have been suggested. In this research, to cope with thermal deformation, a model based correction was carried out with the function of an external machine coordinate shift. Models with multi-linear regression or neural network were investigated to selected a good one for thermal compensation. Consequently, multi-linear regression model combined with origin shift was verified good enough form the machining of dot matrices of plate with ball end milling.