• 산업기술연구
• /
• 제15권
• /
• pp.203-208
• /
• 1995

This paper suggests the three dimensional steady state searching techniques of hard disk/head system, which has some skew angle with flexure. In order to analyze the steady state behaviors of magnetic head slider, the localized Knudsen number and the localized bearing numbers are sued. For finding the steady state of magnetic head slider under the pre-loaded condition, I proposed multi-dimensional Newton-Raphson method which traces the equilibrium position of magnetic head slider, which has 3-degrees of freedom, using Jacobian matrix. The multi-dimensional Newton-Raphson method is very efficient technique for finding the steady state position of magnetic head slider because it approaches to the equilibrium position with changing three parameters simultaneously.

• Journal of electromagnetic engineering and science
• /
• 제7권1호
• /
• pp.1-6
• /
• 2007

Recently, Mc(Multi-code) modulation/demodulation(modem) technique has been explored for high speed data transmission in wireless environment. The conventional Mc modem generates some side effects such as allocating Walsh codes, which motivates to propose a novel Mc modem method with sub-code. Our proposed system should expanded the size of sub-code to provide high-rate data transmission, which also affect adversely to the performance of the system with high PAPR(Peak to Average Power Ratio). Thus, in this paper, we propose a novel pre-coded Multi-Dimensional HCOC(High Capacity Orthogonal Code) Mc modem technique to reduce the high PAPR, which enables the performance improvement. This proposed system can be easily designed by concatenating HCOC Mc modem with the generic Mc modem. The pre-coding technique that is used in this paper is CAC(Constant Amplitude Coding), that helps the system maintain the constant transmission power and reduce the maximum transmission power.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3206-3212
• /
• 2023

We developed a miniaturized multi-dimensional radiation sensor system consisting of an inorganic scintillator array and plastic optical fibers. This system can be applied to remotely obtain the radioactivity distribution and identify the radionuclides in radioactive waste by utilizing a scanning method. Variation in scintillation light was measured in two-dimensional regions of interest and then converted into radioactivity distribution images. Outliers present in the images were removed by using a digital filter to make the hot spot location more accurate and cubic interpolation was applied to make the images smoother and clearer. Next, gamma-ray spectroscopy was performed to identify the radionuclides, and three-dimensional volume scanning was also performed to effectively find the hot spot using the proposed array sensor.

• Industrial Engineering and Management Systems
• /
• 제15권2호
• /
• pp.131-142
• /
• 2016

We consider a multi-server queueing system without buffer and with two types of customers as a model of operation of a mobile network cell. Customers arrive at the system in the marked Markovian arrival flow. The service times of customers are exponentially distributed with parameters depending on the type of customer. A part of the available servers is reserved exclusively for service of first type customers. Customers who do not receive service upon arrival, can make repeated attempts. The system operation is influenced by random factors, leading to a change of the system parameters, including the total number of servers and the number of reserved servers. The behavior of the system is described by the multi-dimensional Markov chain. The generator of this Markov chain is constructed and the ergodicity condition is derived. Formulas for computation of the main performance measures of the system based on the stationary distribution of the Markov chain are derived. Numerical examples are presented.

• 로봇학회논문지
• /
• 제4권3호
• /
• pp.210-217
• /
• 2009

This paper introduces a design of multi-dimensional complex emotional model for various complex emotional expression. It is a novel approach to design an emotional model by comparison with conventional emotional model which used a three-dimensional emotional space with some problems; the discontinuity of emotions, the simple emotional expression, and the necessity of re-designing the emotional model for each robot. To solve these problems, we have designed an emotional model. It uses a multi-dimensional emotional space for the continuity of emotion. A linear model design is used for reusability of the emotional model. It has the personality for various emotional results although it gets same inputs. To demonstrate the effectiveness of our model, we have tested with a human friendly robot.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.280-289
• /
• 2005

A single degree of freedom system and transmissibility are key concepts in many problems of vibration isolation. In order to apply this approach, however, several assumptions must be satisfied, which are often not realistic. For examples, in practical systems, vibration transmissions at multi-point with multi-degree of freedom(translational and rotational DOF) take place and mobilities or impedances of receiver structures cannot be ignored any more especially over high frequency range. Therefore, a multi-dimensional treatment is required for accurate estimation of dynamic behavior of the system. In this paper, an approach using vibrational power flow is introduced to deal with analysis of multi-dimensional vibration isolation system in a more practical way and in aspects of vibration isolations and vibration path analysis. Procedures of this approach and some results of research for vibrational power path analysis with rotational terms included are presented. Difficulties in this method are also discussed.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.137-140
• /
• 2005

Resin transfer molding (RTM) is one of the most popular processes for producing fiber reinforced polymer composites. In the manufacture of complex thick composite structures, analysis on flow front advancement on the resin impregnating the multi-layered fiber preform is helpful for the optimization of the process. In this study, three-dimensional mold filling simulation of RTM is carried out by using CVFEM (Control Volume Finite Element Method). On the assumption of isothermal flow of Newtonian fluid, Darcy’s law and continuity equation are used as governing equations. Different permeability tensors employed in each layer are obtained by experiments. Numerically predicted flow front is compared with experimental one in order to validate the numerical results. Flow simulations are conducted in the two mold geometries, rectangular plate and hollow cylinder. Permeability tensor of each layer preform in Cartesian coordinate system is transformed to cylinder coordinates system so that the flow within the multi-layered preforms of the hollow cylinder can be calculated exactly. Our emphasis is on the three dimensional flow analysis for circular three-dimensional braided preform, which shows outstanding mechanical properties such as high impact strength and toughness compared with other conventional two-dimensional laminar-structured preforms.

• 한국컴퓨터산업학회논문지
• /
• 제3권8호
• /
• pp.1007-1018
• /
• 2002

평가결과에 대한 과학적이고 다차원적인 분석은 학습자, 교수자에게 중요한 정보를 제공해 주는 역할을 한다. 기존의 평가관련 연구들이 평가도구 개발에 치우친 경향이 있고, 평가결과에 대한 분석은 단편적이고 일차원적인 분석이 대부분이었다. 본 연구에서는 평가결과를 다차원적으로 분석함으로써, 질 높은 교수학습이 이루어질 수 있도록 학습자 및 교수자에게 다양한 정보를 제공해 주는 데 목적을 두고 개발되었다. 차원은 기간, 학생, 평가영역, 난이도, 점수의 5차원으로 분류하였다. 분석결과는 Dcube. 그래프, 스프레드시트 등의 다양한 형태로 제공된다.

• 대한전자공학회논문지SD
• /
• 제39권3호
• /
• pp.73-84
• /
• 2002

불규칙하고 복잡한 다층(multi-layer) VLSI 배선의 커패시턴스 추출을 위한 빠르고 정확한 새로운 방법을 개발하였다. 복잡한 다층 배선구조에서 3차원 field-solver를 사용하여 커패시턴스를 구하는 것은 현실적이지 않기 때문에 근사적 3차원 커패시턴스 추출 방법을 제안한다. 꺽이는 부분(bend)과 상이한 배선사이의 거리를 갖는 동일한 층내의 배선은 불연속한 부분과 만나는 곳을 분할하고 각각의 부분에 2차원 커패시턴스 추출 방법을 사용하여 커패시턴스를 추출하였다. 또한 차폐층(shielding layer)을 갖는 다층 배선 구조에서의 커패시턴스는 시스템 내의 전하의 분포를 조사함으로써 시스템을 간소화 시킨 후 평판 그라운드 기반 2차원 커패시턴스와 간단한 구조로부터 독립적으로 계산될 수 있는 차폐효과를 결합하여 근사적3차원 커패시턴스 추출 방법을 적용하였다. 불규칙한 다층 배선 구조에 대하여 설계된 레이아웃으로부터 해석적으로 구할 수 있는 변수와 평판 그라운드를 사용한 2차원 커패시턴스 추출 방법을 사용하므로 정확하면서도 신속하게 커패시턴스를 추출할 수 있어 일반적인 3차원 방법보다 비용 측면에서 훨씬 효과적이다. 제안된 근사적 3차원 방법을 통해 구한 커패시턴스는 3차원 field-solver를 기반으로 구한 커패시턴스와 오차율 5% 이내의 정확성을 나타낸다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.336-342
• /
• 1994

This paper presents an useful technique for assessing the volumetric error in multi_axis machine tools using the kinematic double ball bar and 3 dimensional spherical contouring. The developed system proposes the 3 dimensional spherical contour for the error analysis. The developed system input the measured radial data, analysing the volumetric errors such as positional, strightness, angle, and squareness errors, etc. The developed system has been tested in a practical machine tool, and showed high