• 한국통신학회논문지
• /
• 제21권3호
• /
• pp.771-783
• /
• 1996

8단자 가변임피던스 전자파 발생장치(8P-VWIG:8Ports-Variable Wave Impedance Generator)에 대한 설계 기술에 대해 나타내고, 내부에서 유기뇌는 전자기장 및 특성임피던스에 대한 수치해석, 일정한 특성임피던스를 갖는 구조에 대해 간단하게 추적할 수 있는 수치알고리즘에 대해 나타내었다. 또한 특정 구조에 대한 균일도 평가결과와 내부 전자계 분포, 그리고 그 응용으로서 EMS 측정시스템에 대한 간단한 소개를 나타내었다. 8P-VWIG는 기존 간이 EMI/EMS 시설들에 비해 시험공간의 활용도가 좋고, 수직 수평 분극 조성이 자유로운 장점을 가지고 있다. 제작된 8P-VWIG는 정재파비로 측정된 제 1공진이 152.1MHz에서 발생하고, $50{\Omega}$ 임피던스 정합 시스템으로 동작하도록 한 8채널의 다중전송선로 구조를 갖는다.

• 전자공학회논문지A
• /
• 제33A권4호
• /
• pp.37-46
• /
• 1996

In this paper, we analyzed the performance improvement of the DS-CDMA/dPSK cellular mobile communication system with CCI canceller and RAKE receiver techniques in mobile radio channel which is characterized by AWGN, Multi-user interference (mUI) and frequency-selective rayleigh fading. System capacity i.e., number of user per cell has been derived and the evaluated results are shown in figuraes as a function of PN code sequence length, number of RAKE receiver tap, BER and E$_{b}$/N$_{o}$. The voice activity factor is assumed to be 3/8 the number of sectors in a cell 3 and MUI is modeled as gaussian process. From the results, the capacity of the DS-CDMA/DPSK cellular mobile communication system is improved by adopting CCI canceller. When we adopt the RAKE receiver to mitigate the multipath fading, the error performance is improved and the amount of improvement is proportional ot the number of taps L in the case that each tap contains a signal component and the better of improvement can be obtained, the smaller of the SNR difference in each tap. The system capacity is more increased when the CCI canceller and the RAKE receiver is used in cascade.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권4호
• /
• pp.295-301
• /
• 2011

A triple-band transceiver module for 2.3/2.5/3.5 GHz mobile WiMAX, IEEE 802.16e, applications is introduced. The suggested transceiver module consists of RFIC, reconfigurable/multi-resonance MIMO antenna, embedded PCB, mobile WiMAX base band, memory and channel selection front-end module. The RFIC is fabricated in $0.13{\mu}m$ RF CMOS process and has 3.5 dB noise figure(NF) of receiver and 1 dBm maximum power of transmitter with 68-pin QFN package, $8{\times}8\;mm^2$ area. The area reduction of transceiver module is achieved by using embedded PCB which decreases area by 9% of the area of transceiver module with normal PCB. The developed triple-band mobile WiMAX transceiver module is tested by performing radio conformance test(RCT) and measuring carrier to interference plus noise ratio (CINR) and received signal strength indication (RSSI) in each 2.3/2.5/3.5 GHz frequency.

• 한국통신학회논문지
• /
• 제30권6C호
• /
• pp.551-559
• /
• 2005

센서 배열을 이용하여 모르는 신호 매개변수들을 추정하는 것에 대한 연구가 광범위하게 진행되어 왔다. 또한 최근에는 셀룰러 시스템의 이동통신 이용자 수가 폭발적으로 증가되어, 다중 사용자로 인한 간섭이 매우 커지고 있다. 이러한 문제를 해결하기 위한 방법으로 채널 용량을 더 증가시키기 위한 안테나 배열기술의 응용이 연구되고 있다. 이 논문에서는 이동국 근처의 국소적 산란 신호의 새로운 모형을 평균 조정 벡터를 이용하여 만들고, 몇 가지 분포에 대한 수학적 유도를 하였다. 이 모델에서 신호 도래각의 추정은 weighted subspace fitting(WSF) 기법에 바탕을 두었고, 통계적 분석과 모의실험을 통해 성능을 보였다.

• ETRI Journal
• /
• 제28권3호
• /
• pp.282-290
• /
• 2006

In vertically overlaid cellular systems, a temporary traffic concentration can occur in a hot-spot area, and this adversely affects overall system capacity. In this paper, we develop an adaptive hot-spot operating scheme (AHOS) to mitigate the negative effects from the nonuniform distribution of user location and the variation in the mixture of QoS requirements in orthogonal frequency division multiple access downlink systems. Here, the base station in a macrocell can control the operation of picocells within the cell, and turns them on or off according to the system overload estimation function. In order to determine whether the set of picocells is turned on or off, we define an AHOS gain index that describes the number of subcarriers saved to the macrocell by turning a specific picocell on. For initiating the picocell OFF procedure, we utilize the changes in traffic concentration and co-channel interference to the neighboring cells. According to computer simulation, the AHOS has been proved to have maximize system throughput while maintaining a very low QoS outage probability under various system scenarios in both a single-cell and multi-cell environments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권12호
• /
• pp.5898-5916
• /
• 2018

In this paper, the downlink performance of multi-cell distributed antenna systems (DAS) with a single user in each cell is investigated. Assuming the channel state information is available at the transmitter, four transmission modes are formulated as combinations of remote antenna units (RAUs) selection and cooperative transmission, namely, non-cooperative transmission without RAU selection (NCT), cooperative transmission without RAU selection (CT), non-cooperative transmission with RAU selection (NCT_RAUS), and cooperative transmission with RAU selection (CT_RAUS). By using probability theory, the cumulative distribution function (CDF) of a user's signal to interference plus noise ratio (SINR) and the system ergodic capacity under the above four modes are determined, and their closed-form expressions are obtained. Furthermore, the system energy efficiency (EE) is studied by introducing a realistic power consumption model of DAS. An expression for determining EE is formulated, and the closed-form tradeoff relationship between spectral efficiency (SE) and EE is derived as well. Simulation results demonstrate their consistency with the theoretical analysis and reveal the factors constraining system EE, which provide a scientific basis for future design and optimization of DAS.

• 대한전자공학회논문지SD
• /
• 제43권1호
• /
• pp.17-26
• /
• 2006

DVD용 아날로그 read channel에 사용되는 PR (1 2 2 1) 신호용 아날로그 비터비 디코더를 순환형 아날로그 병렬회로망 구조를 이용하여 설계하였다. 고 밀도의 마그네틱 기록매체나 DVD등은 인접 신호들의 영향을 많이 받게 되므로, 상호 간섭된 심볼 코드를 일정한 규칙에 따라 생성시켜 코딩하며, 재생 시에는 코딩 규칙의 부합도에 따라 디코딩하여 재생오류를 최소화 시키는 기술이 PRML이다. 이 PRML기술은 주로 디지털 기술로 구현하여 사용되고 있으나, 보다 고속 저 전력화 필요가 증대하여 최근 아날로그 기술로 구현하는 방법이 활발하게 연구되고 있다. 본 연구는 DVD read channel의 아날로그 PRML 구현에 관한 연구로서 PRML의 고속화에 가장 어려운 부분인 비터비 디코더 부분을 순환형 아날로그 병렬 회로망 구조를 이용하여 설계하였다. 설계한 PRML용 비터비 디코더는 PR (1 2 2 1) type으로 기존의 디지털 비터비 디코더 속도의 3배, 전력소모의 1/3인 성능을 보였다.

• 한국지형학회지
• /
• 제27권1호
• /
• pp.1-19
• /
• 2020

A river bed which is submerged in water at high flow and becomes part of the river at low flow, serves as a bridge between the river and the land. The channel bar creates a unique ecosystem with vegetation adapted to the particular environment and the water pool forms a wetland that plays a very important role in the environment. To evaluate anthropogenic impacts on the river bed in the Middle Yeongsangang River, the fluvial landforms in the stream channel were analyzed using multi-temporal remotely-sensed images. In the aerial photograph of 2005 taken before the construction of the large weirs, oxbow lakes, mid-channel bars, point bars, and natural wetlands between the artificial levees were identified. Multiple bars divided the flow of stream water to cause the braided pattern in a particular section. After the construction of the Seungchon weir, aerial photographs of 2013 and 2015 revealed that most of the fluvial landforms disappeared due to the dredging of its riverbed and water level control(maintenance at 7.5El.m). Sentinel-2 images were analyzed to identify differences between before and after the opening of weir gate. Change detection was performed with the near infrared and shortwave infrared spectral bands to effectively distinguish water surfaces from land. As a result, water surface area of the main stream of the Yeongsangang River decreased by 40% from 1.144km² to 0.692km². A large mid-channel bar that has been deposited upstream of the weir was exposed during low water levels, which shows the obvious influence of weir on the river bed. Newly formed unvegetated point bars that were deposited on the inside of a meander bend were identified from the remotely sensed images. As the maintenance period of the weir gate opening was extended, various habitats were created by creating pools and riffles around the channel bars. Considering the ecological and hydrological functions of the river bed, it is expected that the increase in bar areas through weir gate opening will reduce the artificial interference effect of the weir.

• 융합신호처리학회논문지
• /
• 제2권3호
• /
• pp.39-44
• /
• 2001

주파수도약 대역확산 통신은 열악한 채널조건하에서도 송수신기간 서로 약속된 의사 불규칙적인 케리어 주파수의 도약을 위한 정화한 주파수동기가 요구된다. 기존의 주파수도약 통신의 초기동기는 몇 개의 주파수 셑이 정해진 기간 동안 여러 번 반복하여 전송되는 다중주파수도약 동기방법(MFHS)이 사용되었다. 그러나, 동기주파수 전송시간이 길기 때문에 수신기의 동기획득시간이 길고 의도하지 않은 사용자에게 동기정보가 쉽게 누출될 우려가 있었다. 이러한 문제를 풀기 위하여 본 논문에서 적응동기 방법이 제안되었다. 적응동기 방법은 동기주파수의 개수와 반복 전송 횟수를 채널 상태에 따라 가변적으로 변경시킴으로서 통기소요시간을 줄이고 동기진보의 노출가능성을 최소화하는 방법이다. 성능분석을 통해 동기소요시간을 0.5초 수준에서 0.2초 수준으로 줄이고 재밍이나 간섭 영향을 46%까지 감소시킬 수 있음을 확인하였다.

• 조명전기설비학회논문지
• /
• 제24권7호
• /
• pp.26-40
• /
• 2010

We propose a new routing protocol, MCQosR, that is based on bandwidth estimation, admission control, and a routing metric, MCCR - suitable for wireless ad-hoc networks with multiple radios and channels. To use the full capacity of a wireless link, we assume a node with multiple radios for full duplex operation, and a radio using multiple channels to exclude route-intra interference. This makes it possible to use the capacity of a wireless link. Then, to provide bandwidth and delay guarantee, we have a radio with a fixed channel for layer-3 data reception at each node, used to estimate the available bandwidth and expected delay of a wireless link. Based on the estimate of available bandwidth and delay, we apply the call admission control to a new call requiring bandwidth and delay guarantee. New calls with traffic that will overflow link or network capacity are rejected so the accepted calls can use the required bandwidth and delay. Finally, we propose a routing metric, MCCR, which considers the channel contentions and collisions of a wireless link operating in CSMA/CA. MCCR is useful for finding a route with less traffic and distributing traffic over the network to prevent network congestion as much as possible. The simulation of the MCQosR protocol and the MCCR metric shows traffic is distributed and guaranteed service is provided for accepted calls.