• International Journal of Control, Automation, and Systems
• /
• v.5 no.5
• /
• pp.601-605
• /
• 2007

In this paper, we propose a simple and relative electrode contact monitoring method. By exploiting the power line interference, which is regarded as one of the worst noise sources for bio-potential measurement, the relative difference in electrode impedance can be measured without a current or voltage source. Substantial benefits, including no extra circuit components, no degradation of the body potential driving circuit, and no electrical safety problem, can be achieved using this method. Furthermore, this method can be applied to multi-channel isolated bio-potential measurement systems and home health care devices under a steady measuring environment.

• Journal of information and communication convergence engineering
• /
• v.5 no.4
• /
• pp.328-332
• /
• 2007

The structure of MMSE receiver frontended by CMA array working in CDMA forward link is proposed. By using the despreaded pilot signal of forward link as a reference signal, CMA array can capture multi-path signals securely even in severely faded mobile channel. The remaining MAl (Multiple Access Interference) is cancelled by the cascaded MMSE receiver. Through computer simulation, it is proved that the proposed system shows much better BER performance than any other systems. As a mobile based spatio-temporal receiver, the proposed system also reduces implemental cost and complexity by adopting the simplest algorithm for its spatial and temporal domain processing.

• Journal of Communications and Networks
• /
• v.17 no.5
• /
• pp.473-481
• /
• 2015

In this study, we propose a clustering algorithm to enhance the performance of wireless sensor and actuator networks (WSANs). In each cluster, a multi-level hierarchical structure can be applied to reduce energy consumption. In addition to the cluster head, some nodes can be selected as intermediate nodes (INs). Each IN manages a subcluster that includes its neighbors. INs aggregate data from members in its subcluster, then send them to the cluster head. The selection of intermediate nodes aiming to optimize energy consumption can be considered high computational complexity mixed-integer linear programming. Therefore, a heuristic lowest energy path searching algorithm is proposed to reduce computational time. Moreover, a channel assignment scheme for subclusters is proposed to minimize interference between neighboring subclusters, thereby increasing aggregated throughput. Simulation results confirm that the proposed scheme can prolong network lifetime in WSANs.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1928-1931
• /
• 2002

Orthogonal Frequency Division Multiplexing or OFDM is a form of multi-carrier modulation technique. High spectral efficiency, robustness to channel fading, immunity to impulse interference, uniform average spectral density, capability of handling very strong echoes and less on linear distortion are among the favorite properties of OFDM. Even though there are many advantages of OFDM, t has two main drawbacks: high Peak to Average Power Ratio (PAPR) and frequency of offset. In this paper, the issue of PAPR in OFDM is discussed. A new algorithm is proposed to reduce PAPR by selecting the input sequences property using a lookup table.

• International Journal of Ocean System Engineering
• /
• v.1 no.3
• /
• pp.144-147
• /
• 2011

The rotor that initially converts the flow energy into rotational energy is a very important component that affects the efficiency of the entire tidal current power system. Rotor performance is determined by various design variables. Power generation is strongly dependent on the incoming flow velocity and the size of the rotor. To extract a large quantity of power, a tidal current farm is necessary with a multi-arrangement of devices in the ocean. However, the interactions between devices also contribute significantly to the total power capacity. Therefore, rotor performance, considering the interaction problems, needs to be investigated to maximize the power generation in a limited available area. The downstream rotor efficiency is affected by the wake produced from the upstream rotor. This paper introduces the performance of a downstream rotor affected by wakes from an upstream rotor, demonstrating the interference affecting various gabs between devices.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.469-470
• /
• 2007

In this paper, we propose a simple and relative electrode contact monitoring method. By exploiting the power line interference, which is regarded as one of the worst noise sources for bio-potential measurement, the relative difference in electrode impedance can be measured without a current or voltage source. Substantial benefits, including no extra circuit components, no degradation of the body potential driving circuit, and no electrical safety problem, can be achieved using this method. Furthermore, this method can be applied to multi-channel isolated bio-potential measurement systems and home health care devices under a steady measuring environment.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.3
• /
• pp.188-196
• /
• 2004

Amplifier linearity plays a major role in the quality of mordern communication systems. The Power amplifier should be operated near saturation region to achieve high efficiency But at this region amplitude and phase distortions of the amplifier remarkably increase with the input power increase and cause a significant adjacent channel interference. In this paper, an independently controllable AM/AM and AM/PM predistortion linearizers consisted of two bias feed resistance linearizers is proposed. This linearizer allows independent adjustment of the AM/AM and AM/PM curves by using two adjustable voltages to compensate tile power amplifier non-linearities. The predistortion linearizer can improve the ACPR by 5.3dB with cdma2000 multi carrier signals. And by applying this linearizer to two-tone(880MHz) power amplifier, third order IMD products are improved up to 8(dB).

• Journal of Satellite, Information and Communications
• /
• v.12 no.2
• /
• pp.65-70
• /
• 2017

The structure of MMSE receiver front-ended by CMA(Constant Modulus Array) array working in CDMA forward link which is applicable to LEO spread spectrum satellite communication system is proposed. By using the despreaded pilot signal of forward link as a reference signal, the CMA array can capture multi-path signals securely even in severely faded LEO satellite channel. The remaining MAI (Multiple Access Interference) is cancelled by the cascaded MMSE receiver. Besides theoretical development, through relevant computer simulation, it is proved that the proposed system shows much better BER performance than any other possible candidate systems. As a spatio-temporal receiver mounted on a mobile vehicle, the proposed system also reduces implemental cost and complexity by adopting the simplest algorithm for its spatial and temporal domain processing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1540-1547
• /
• 2000

In this paper, the performance of the MMSE multiuser detector is compared with the conventional detector with respect to the signal-to-noise ratio, the number of users and the Nakagami parameter under AWGN as well as Nakagami fading channel. The results show that the MMSE multiuser detector is superior to the conventional detector with respect to cancelling the multiple access interference. However, its drawback is the hardware's complexity. To solve this drawback, the advanced MMSE multiuser detector is presented, and its performance is analyzed. The number of taps in the advanced MMSE multiuser are independent of the processing gain. Thus, the system engineer can choose the appropriate number of taps in the detector to achieve a optimal trade-off between the hardware complexity and the performance of system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.4
• /
• pp.395-403
• /
• 2016

This paper introduces a multi-cell search method for heterogeneous networks (HetNet), in which user equipments need to search multiple cells in its vicinity simultaneously. Due to the difficulty of acquiring channel informations for multiple cells, a non-coherent approach is preferred. In this paper, a non-coherent single-cell search scheme using a weighted vector is proposed, and the successive interference cancellation based multi-cell search algorithm is devised. In order to improve cell search performance, the weighted vector is designed in a way to exploit the general characteristic of wireless channel. Based on the fact that the performance of the proposed single-cell search scheme deviates slowly from the one using the optimal weighted vector, a universal weighted vector is also proposed, which shows the performance close to the optimal ones for various channel environments and signal-to-noise ratio regimes. Simulation results confirm that the proposed multi-cell search algorithm is capable of identifying cells more accurately with the help of the proposed single-cell search scheme, and can detect the remaining cells more effectively by removing the signals of the identified cells from the received signal.