• 제목/요약/키워드: Multi-channel Communication

검색결과 803건 처리시간 0.033초

A Study on Two-Way Microwave Communication link at 26 ㎓ frequency band

  • Jeong, Young-Sic;Kim, Whan-Woo;Min, Jae-Hong;Park, Wung
    • 한국통신학회논문지
    • /
    • 제28권8B호
    • /
    • pp.674-682
    • /
    • 2003
  • This paper presents the studies on wireless channel modeling and reverse link synchronization of CATV. This paper analyzes multi-path fading channel to the cause of signal distortion in the wireless communication environment. We represent the microwave link characteristics according to the channel model. Multi-path channel can affect fading.

무선 센서 네트워크에서 다중 채널과 전송세기 제어를 이용한 맥 프로토콜 (SPMC-MAC : Slim Preamble Multi-Channel MAC Protocol with Transmission Power Control in Wireless Sensor Networks)

  • 윤장묵;박세웅
    • 한국통신학회논문지
    • /
    • 제33권10B호
    • /
    • pp.876-884
    • /
    • 2008
  • 본 논문에서는 다중 채널 환경의 무선 센서 네트워크에서 에너지 소모를 최소화하고 데이터 수율(Throughput)을 증대시키기 위한 비동기 방식의 맥 프로토콜을 제안한다. 제안하는 맥 프로토콜인 SPMC-MAC(Slim Preamble Multi Channel Media Access Control)은 [6]에서 제안했던 수신 노드가 깨어날 시간 정보의 이점을 이용하여 프리앰블의 길이를 줄이는 매커니즘을 채택한다. 프리앰블은 수신 노드의 ID와 랜덤하게 선택된 채널을 포함하여 전용의 기본 채널을 통해서 전송된다. 전송 세기 제어는 통신 가능 범위 내에서 적정 노드 수를 유지함으로써 데이터 전송 시 충돌과 간섭을 줄일 수 있다. 수학적 분석과 모의실험을 통해 에너지 소모와 수율에 대해 제안하는 SPMC-MAC과 X-MAC을 비교한다.

모노펄스 레이다용 다채널 집적 수신기의 수신 채널 보정 (Receiving Channel Calibration of Multi-Channel Integrated Receiver for Monopulse Radar)

  • 박진성
    • 한국인터넷방송통신학회논문지
    • /
    • 제24권3호
    • /
    • pp.109-114
    • /
    • 2024
  • 모노펄스 레이다용 다채널 집적 수신기 내에 존재하는 채널 간 간섭은 최근 수신기의 소형화 추세에 따라 그 영향성이 늘어날 것으로 예상된다. 따라서, 본 논문에서는 모노펄스 레이다에 적용되는 다채널 집적 수신기의 수신 채널간 간섭을 보정하여, 표적 각도 검출 성능 왜곡을 배제할 수 있는 방법을 제안한다. 이를 위하여 스위치, 방향성 결합기, 정합 부하, ADC(Analog to Digital Converter), 채널 보정 신호원 등을 이용하여 보정 하드웨어 구성을 제안하였다. 또한, 스위치와 보정 신호원을 제어하여 총 9개의 산란 파라미터를 획득하고, 안테나로부터 출력되는 모노펄스 신호와 채널 간 간섭이 존재하는 상태에서의 다채널 수신기를 통과한 모노펄스 신호 간의 수학적 관계를 이용하여 왜곡되지 않는 모노펄스 신호를 복원하는 방법을 제안하였다.

다중-인터페이스 애드-혹 무선 네트워크를 위한 MAC 인식 다중-채널 라우팅 프로토콜 (MAC Aware Multi-Channel Routing Protocol for Multi-Interface Ad-Hoc Wireless Networks)

  • 임헌주;정수경;이성화;박인갑
    • 한국인터넷방송통신학회논문지
    • /
    • 제13권5호
    • /
    • pp.249-258
    • /
    • 2013
  • 다중-홉 애드 혹 네트워크(multi-hop ad hoc networks)에서 실효 대역폭과 단-대-단 처리량을 높이기 위한 방법으로 다중-인터페이스 다중-채널 구조가 주목을 받고 있다. 그러나 단일 인터페이스 기반 네트워크를 위해서 설계된 기존의 라우팅 메트릭들은 다중-인터페이스 다중-채널 기반 네트워크의 특성을 정확히 반영할 수 없으므로, 처리량 개선의 효과를 기대할 수 없다. 따라서 채널 다양성, 인터페이스 전환 비용과 같은 메트릭들을 사용하여 높은 처리량을 갖는 경로를 발견하는 MCR이 제안되었다. 하지만 MCR은 트래픽 부하의 영향을 반영하지 않기 때문에 혼잡한 네트워크에서 성능이 저하되는 문제점이 있다. 본 논문에서는 MCR에 채널 접근 시간 메트릭을 결합하여 혼잡한 조건에서도 높은 처리량을 갖는 경로를 선택하는 MAMCR 메트릭을 제안하고, ns-2 시뮬레이션을 통해 성능 개선 효과를 확인한다.

FPGA를 이용한 다채널 동기 통신용 IC 설계 (The Design of Multi-channel Synchronous Communication IC Using FPGA)

  • 양오;옥승규
    • 반도체디스플레이기술학회지
    • /
    • 제10권3호
    • /
    • pp.1-6
    • /
    • 2011
  • In this paper, the IC(Integrated Circuit) for multi-channel synchronous communication was designed by using FPGA and VHDL language. The existing chips for synchronous communication that has been used commercially are composed for one to two channels. Therefore, when communication system with three channels or more is made, the cost becomes high and it becomes complicated for communication system to be realized and also has very little buffer, load that is placed into Microprocessor increases heavily in case of high speed communication or transmission of high-capacity data. The designed IC was improved the function and performance of communication system and reduced costs by designing 8 synchronous communication channels with only one IC, and it has the size of transmitter/receiver buffer with 1024 bytes respectively and consequently high speed communication became possible. It was designed with a communication signal of a form various encoding. To detect errors of communications, the CRC-ITU-T logic and channel MUX logic was designed with hardware logics so that the malfunction can be prevented and errors can be detected more easily and input/output port regarding each communication channel can be used flexibly and consequently the reliability of system was improved. In order to show the performance of designed IC, the test was conducted successfully in Quartus simulation and experiment and the excellence was compared with the 85C3016VSC of ZILOG company that are used widely as chips for synchronous communication.

인지무선통신에서 링크 간 간섭을 고려한 채널할당기법 (Channel Allocation Scheme considering Inter-Link Interference for Cognitive Radio Networks)

  • 권영민;박형근
    • 전기학회논문지
    • /
    • 제65권6호
    • /
    • pp.1080-1082
    • /
    • 2016
  • In a multi-hop CR (Cognitive Radio) network, each node find a path to destination node through several links. If links have the same frequency channel, there can be a serious interference among the links and it can reduce the network capacity. In multi-channel CR networks, each channel has different capacity according to the inter-link interference, and each channel has different traffic properties of primary users. In this paper, we propose channel scheduling scheme to minimize channel interferences and collision with primary users. Simulation results show the improvement of channel capacity and collision rate with primary users.

수중 음향 채널에서 가변 전송율 다중 반송파 CDMA의 성능 분석 (Performance analysis of Variable Rate Multi-carrier CDMA under an underwater acoustic channel)

  • 강희훈;한완옥
    • 한국전자통신학회논문지
    • /
    • 제7권1호
    • /
    • pp.33-38
    • /
    • 2012
  • 수중 음향 채널은 매우 복잡하고 지속적인 시변 특성을 가지므로 양질의 통신 서비스를 제공하기란 쉽지 않다. 이러한 수중 음향 채널의 열악한 환경에 대해서 신뢰성이 있고 강건한 통신 서비스를 제공하기 위해서 본 논문에서는 데이터 전송율을 가변시키는 다중 반송파 CDMA(MC-CDMA) 시스템의 성능을 분석한다. 제안한 시스템에 적용한 가변 전송율 알고리즘은 사용자 데이터 전송율을 순시 채널 조건의 함수로 계산하여 채널의 정보를 파악한다. 채널 상태 정보의 획득은 보다 효율적으로 데이터를 전송할 수 있게 하고 시스템의 전반적인 성능을 개선하게 한다. 본 논문에서는 제안한 가변 전송율 다중 반송파 CDMA 시스템의 성능 분석을 시뮬레이션을 통해서 검증한다. 또한 다중 반송파에 적용하는 확산부호들의 적용 가능성을 분석한다.

Progressive Linear Precoder Design for Multiple Codewords MIMO ARQ Systems with ARQ Bundling Feedback

  • Zhang, Zhengyu;Qiu, Ling
    • Journal of Communications and Networks
    • /
    • 제14권2호
    • /
    • pp.199-205
    • /
    • 2012
  • This work investigates the progressive linear precoder design for packet retransmissions in multi-input multi-output (MIMO) systems with multiple codewords and automatic repeat request (ARQ) bundling feedback. Assuming perfect channel state information, a novel progressive linear ARQ precoder is proposed in the perspective of minimizing the packet error rate. We devise the ARQ precoder by combining power loading and sub channel pairing between current retransmission and previous transmissions. Furthermore, we extend the design to the case that the channel estimation error exists. Numerical results show that the proposed scheme can improve the performance of MIMO ARQ systems significantly regardless of the channel estimation error.

GROUP SECRET KEY GENERATION FOR 5G Networks

  • Allam, Ali M.
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제13권8호
    • /
    • pp.4041-4059
    • /
    • 2019
  • Key establishment method based on channel reciprocity for time division duplex (TDD) system has earned a vital consideration in the majority of recent research. While most of the cellular systems rely on frequency division duplex (FDD) systems, especially the 5G network, which is not characterized by the channel reciprocity feature. This paper realizes the generation of a group secret key for multi-terminals communicated through a wireless network in FDD mode, by utilizing the nature of the physical layer for the wireless links between them. I consider a new group key generation approach, which using bitwise XOR with a modified pairwise secret key generation approach not based on the channel reciprocity feature. Precisely, this multi-node secret key agreement technique designed for three wireless network topologies: 1) the triangle topology, 2) the multi-terminal star topology, and 3) the multi-node chain topology. Three multi-node secret key agreement protocols suggest for these wireless communication topologies in FDD mode, respectively. I determine the upper bound for the generation rate of the secret key shared among multi-node, for the three multi-terminals topologies, and give numerical cases to expose the achievement of my offered technique.