• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.791-794
• /
• 2003

The increasing computational capability of processors is driving the need for high bandwidth links to communicate and store the information that is processed. Such links are often an important part of multi processor interconnection, processor-to-memory interfaces and Serial-network interfaces. This paper describes a 0.11-${\mu}{\textrm}{m}$ CMOS 4 Gbp s/pin 3-Level transceiver using RSL/(Rambus Signaling Logic) for high bandwidth. This system which uses a high-gain windowed integrating receiver with wide common-mode range which was designed in order to improve SNR when operating with the smaller input overdrive of 3-Level. For multi-gigabit/second application, the data rate is limited by Inter-Symbol Interference (ISI) caused by low pass effects of channel, process-limited on-chip clock frequency, and serial link distance. In order to detect the transmited 4Gbps/pin with 3-Level data sucessfully ,the receiver is designed using 3-stage sense amplifier. The proposed transceiver employes multi-level signaling (3-Level Pulse Amplitude Modulation) using clock multi phase, double data rate and Prbs patten generator. The transceiver shows data rate of 3.2 ~ 4.0 Gbps/pin with a 1GHz internal clock.

• Journal of Korea Multimedia Society
• /
• v.7 no.8
• /
• pp.1078-1085
• /
• 2004

The SARLM(Source Adaptive Receiver-Driven Multi-Layered Multicast) has been proposed to address heterogeneous bandwidth constraints through layer merging and splitting. However, this method causes that receivers subscribing to the higher layer drop down to the lower layer and hence may decrease utilization of available bandwidth after layer merging. In this paper, we proposed a multicast regrouping method considering distributive status of receivers according to loss rates. The proposed method weights receivers according to loss rates. And then it groups higher layer with receivers subscribing to lower layer have extra bandwidth and lower layer with receivers subscribing to higher layer have high loss rate. Experimental results show that receivers subscribing to higher layer can receive in high transmission rate and consequently the proposed method effectively improves utilization of available bandwidth.

• Journal of Korea Multimedia Society
• /
• v.10 no.12
• /
• pp.1632-1644
• /
• 2007

Wireless Mesh Networks aim to attain large connectivity with minimum performance degradation, as network size is increase. As such, scalability is one of the main characteristics of Wireless Mesh Networks that differentiates it from other wireless networks. This characteristic creates the need for bandwidth efficiency strategies to ensure that network performance does not degrade as the size of the network increase. Several researches have been done to realize mesh networks. However, the researches conducted were mostly focused on a per TCP/IP layer basis. Also, the studies on bandwidth efficiency and bandwidth improvement are usually dealt with as separate issues. This paper aims to simultaneously study bandwidth efficiency and improvement. Aside from optimizing the bandwidth given a fixed capacity, the capacity is also increased using results of physical layer studies. In this paper, the capacity is improved by using the concept of non-overlapping channels for wireless communication. A channel allocation scheme is conceptualized to choose the transmission channel that would optimize the network performance parameters with consideration of chosen Quality of Service (QoS) parameters. Network utility maximization is used to optimize the bandwidth after channel selection. Furthermore, a routing scheme is proposed using the results of the network utilization method and the channel allocation scheme to find the optimal path that would maximize the network gain.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.319-328
• /
• 1999

It is necessary to devise the method for increasing bandwidth efficiency in order to provide the high speed mobile multi-media communication services with CDMA under the limited radio bandwidth resources. In this paper the structure for transmitting the high speed data at the half bandwidth of the required bandwidth using the symmetry property of the IFFT output of the binary input MC-CDMA, which enables the time scaling method utilized, is proposed. The processing gain is increased 4 times than the DS-CDMA and its performance is evaluated as better than DS-CDMA with rake receivers under the Rayleigh fading channel and same bandwidth per one channel.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.613-616
• /
• 2012

A multi-spot-beam satellite is an attractive technique for future satellite communications since it can support high data rates by projecting high power density to each spot beam and can reuse a frequency in different cells to increase the total system capacity. In this letter, we propose a resource management technique adjusting the bandwidth of each beam to minimize the difference between the traffic demand and allocated capacity. This represents a reasonable solution for dynamic bandwidth allocation, considering a trade-off between the maximum total capacity and fairness among the spot beams with different traffic demands.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.105-112
• /
• 1998

In this paper, several bandwidth sampling methods were compared using experimental result in which contains "multi-order sampling", which was proposed for envelope detections in RF ultrasonic signals. A "Quadrature sampling method" and "Second-order sampling method" were compared with it. The resultant image of second-order sampling method introduces too much error as compared with the result of quadrature sampling. But Multi-order sampling method, specialy 5-th sampling method showed quite good envelope detection property. This means that more economical and quite good performance digital beamforming system can be built by adopting this multi-order sampling method.s multi-order sampling method.

• Journal of Digital Contents Society
• /
• v.18 no.6
• /
• pp.1207-1211
• /
• 2017

Long-Reach PON (LR-PON) is a broadband access network using passive optical network (PON) technology which the reach is extended to 100 km or higher. A major challenge in LR-PON is that the propagation delay between OLT and ONUs is increased by a very significant amount. To effectively and fairly distribute the upstream bandwidth dynamically in LR-PON, we propose a new periodic and multi-thread polling based dynamic bandwidth allocation (DBA) algorithm. We compare the proposed algorithm with traditional DBAs and show its advantage on average packet delay. Numerical results are analyzed under varying offered loads.

• The Journal of the Korea Contents Association
• /
• v.9 no.8
• /
• pp.73-83
• /
• 2009

TCP(Transmission Control Protocol) is currently used connection-oriented protocol as a typical transport layer protocol in the Internet. However, it has deficiency not be able to communicate with other TCP entities when any link included in the path is down because of single-homing on single path. SCTP(Stream Control Transmission Protocol) suggested as the new transport layer protocol supports multi-homing feature, which provides several paths between source and destination. It can communicate with other SCTP entities using alternate path even when any link on the primary path is down. This paper aims to measure and analyze the multi-homing effect of SCTP over TCP in case of link-down using NS-2 simulator. We classify SCTP into $SCTP_{single-homing}$ and $SCTP_{multi-homing}$ because SCTP with single-homing can also be used like TCP. We measured throughput and bandwidth utilization varying link-down duration, bandwidth, and RTT(round trip time), Simulation results show that throughput of $SCTP_{multi-homing}$ is more than that of TCP by 18 % on average. It is also shown that $SCTP_{multi-homing}$ on varying RTT and bandwidth increases the throughput of TCP by 'l7% and 9% on average, respectively in the link-down environment. In above cases, more or less difference between $SCTP_{single-homing}$ and TCP on throughput and bandwidth utilization was found To summarize, multi-homing effect of SCTP over TCP on throughput is about 18 % on average in the link-down environment This experimental result can be used as the benchmark in order to estimate the multi-homing effect of SCTP over TCP when the link-down happens in the real Internet.

• The KIPS Transactions:PartC
• /
• v.15C no.4
• /
• pp.289-296
• /
• 2008

In wireless mesh network, studies on routing protocols have been actively carried out recently, and hop count is used as a major routing metric in destination-sequenced distance-vector (DSDV) routing protocol, which is a representative proactive routing protocol. Although hop-by-hop multi-path (HMP) DSDV and enhanced HMP (EHMP) DSDV routing protocols perform routing by considering both hop count and residual bandwidth within one hop distance nodes, it has a shortcoming that routing is carried out via non-optimal path from the aspect of end-to-end routing. In order to overcome the shortcoming, a cost-aware multi-path (CAMP) DSDV routing protocol is proposed in this paper, which considers hop count and end-to-end minimum residual bandwidth. Simulation results based on NS-2 show that the proposed routing protocol performs better than DSDV, HMP DSDV, and EHMP DSDV protocols from the aspect of throughput and packet delivery ratio, by appropriately using hop count and end-to-end minimum residual bandwidth information and has the same number of management messages with HMP DSDV and EHMP DSDV protocols.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.427-430
• /
• 2005

A multi-code biorthogonal code keying (MBCK) system consists of multiple waveform coding blocks, and the sum of output codewords is transmitted. Drawback of MBCK is that it requires amplifier with high linearity because its output symbol is multi-level. MBCK with constant amplitude precoding block (CA-MBCK) has been proposed, which guarantees sum of orthogonal codes to have constant amplitude. The precoding block in CA-MBCK is a redundant waveform coder whose input bits are generated by processing the information bits. Redundant bits of constant amplitude coded CA-MBCK are not only used to make constant amplitude signal but also used to improve the BER performance at the receiver. In this paper, we proposed a transmission scheme which combines CA-MBCK with $Q^2PSK$ modulation to improve bandwidth efficiency of CA-MBCK and also uses chip interleaving to maintain a constant amplitude feature of CA-MBCK. bandwidth efficiency of a proposed transmission scheme is increased fourfold. And the BER performance of the scheme is same as that of CA-MBCK.