• The KIPS Transactions:PartC
• /
• v.13C no.6 s.109
• /
• pp.677-684
• /
• 2006

This paper investigates the link margin of MB-OFDM UWB system quantitatively. Various simulations are performed considering the implementation loss by imperfect synchronization unit and the effect of multi-path fading channels. MB-OFDM UWB system uses ZP(Zero Padding) instead of CP(Cyclic Prefix) and supports two transmission modes; one is TFI(Time Frequency Interleaving) mode that transmits OFDM symbols using different carrier frequency from symbol to symbol according to Time Frequency(TF) codes, the other is FFI(Fixed Frequency Interleaving) mode that transmits OFDM symbols using a specific carrier frequency. The advantage of if and TFI is to be able to increase the transmitting power effectively compared to the existed OFDM systems that transmit the signal continuously at the same average transmitting power. From the analysis results of Ink margin, to guarantee the service range of 4m in 200Mbps mode, TFI mode must necessarily be implemented and the service range of 480Mbps mode is estimated about 1-2m in the line-of-sight multi-path channel (CMI).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.123-126
• /
• 2002

A proposed multi-layer ceramic (MLC) chip type band-pass filter (BPF) is presented. The MLC chip BPF has the benefits of low cost and small size. The BPF consists of coulped stripline resonators and coupling capacitors. The BPF is designed to have an attenuation pole at below the passband for a receiver band of IMT-2000 handset. The computer-aided design technology is applied for analysis of the BPF frequency characteristics. The passband and attenuation pole depend the coupling between resonators and coupling capacitance. The frequency characterics of the passband and attenuation pole are analysed with the variance of the coupling between resonators and coupling capacitance. An equivalent circuit and structure of MLC chip BPF are proposed. The frequency characteristics of the BPF is well acceptable for IMT-2000 application.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.8
• /
• pp.740-743
• /
• 2003

A multi-layer ceramic (MLC) chip type band-pass filter (BPF) is presented. The MLC chip BPF has the benefits of low cost and small size. The BPF consists of coulped stripline resonators and coupling capacitors. The BPF is designed to have an attenuation pole at below the passband for a receiver band of IMT-2000 handset. The computer-aided design technology is applied for analysis of the BPF frequency characteristics. The passband and attenuation pole depend on the coupling between resonators and coupling capacitance. The frequency characterics of the passband and attenuation pole are analyzed with the variation of the coupling between resonators and coupling capacitance. An equivanlent circuit and structure of MLC chip BPF are proposed. The frequency characteristics of the BPF is well acceptable for IMT-2000 application.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.11
• /
• pp.987-995
• /
• 2016

One of evaluation indicators of candidate waveforms for 5G mobile communication is spectral efficiency improvement by OOB(Out of Band) power reduction technique. In this paper, time-frequency resource allocation characteristic of UFMC(Universal Filtered Multi-Carrier), FBMC(Filter Bank Multi-Carrier), and W-OFDM(Weighted Orthogonal Frequency Division Multiplexing) system is evaluated and analyzed. As simulation results, spectral efficiency characteristic of these systems have been improved according to time resource allocation. In this paper, we can confirm that each system has similar time-frequency efficiency characteristic when the number of transmission bit is same and four symbols are transmitted with the linear system condition. Also, we can conclude that FBMC system has the lowest time-frequency resource efficiency under the nonlinear condition.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.4
• /
• pp.315-322
• /
• 2003

We propose a channel-attentive Mel frequency cepstral coefficient (CAMFCC) extraction method to improve the recognition performance of speech that is partially corrupted in the frequency domain. This method introduces weighting terms both at the filter bank analysis step and at the output probability calculation of decoding step. The weights are obtained for each frequency channel of filter bank such that the more reliable channel is emphasized by a higher weight value. Experimental results on TIDIGITS database corrupted by various frequency-selective noises indicated that the proposed CAMFCC method utilizes the uncorrupted speech information well, improving the recognition performance by 11.2% on average in comparison to a multi-band speech recognition system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.4
• /
• pp.259-270
• /
• 2003

In order to properly design warning sounds that are affectively suitable to computer users, warning sounds used in Windows operating system were analyzed in terms of their sound properties; frequency band, spectral characteristics and physical intensity. A total of 36 warning sounds (3*4*3) were generated and tested with respect to three experimental variables. Among 178 collected affective adjectives that are related to hearing and sounds, seven representative affective adjectives were abstracted by statistical grouping techniques. In the experiment, subjective preference tests were performed for the 36 warning sounds according to the seven affective factors. From the result, the affective factors were again grouped into three major factors and the 60dB boost-type warning sounds at the low frequency band were, in general, the most preferred. followed by the 70dB cut-type sounds at the middle frequency band. These warning sounds have a characteristic of boost power spectrum below 1000Hz frequency band and received good scores on simplicity, clarity and accurateness.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.11
• /
• pp.955-965
• /
• 2013

The joint tactical information distribution system (JTIDS) is used as the communication terminal of Link-16 by the United States armed forces, north atlantic treaty organization (NATO), and other allied forces. A portion of Link-16 frequencies may be shortly remapped to other systems owing to the growing demand for frequencies, especially in civil aviation, which is witnessing a constant increase in air traffic. This will affect the performance of Link-16. Therefore, in this paper, we analyze the effect of frequency band reduction on the performance of Link-16 waveform under partial-band noise jamming with Nakagami fading, via simulation and numerical analysis. The multi-net and anti-jamming performance of Link-16 with frequency remapping is compared with that of conventional Link-16 systems. The results show that the performance of Link-16 waveform is degraded with the reduction in frequencies. Nonetheless, Link-16 retains its jam resistance, and it can support multiple users in the same time slots.

• MALSORI
• /
• no.44
• /
• pp.157-169
• /
• 2002

We propose a weighted filter bank analysis and model adaptation (WFBA-MA) scheme to improve the utilization of uncorrupted or less severely corrupted frequency regions for robust speech recognition. A weighted met frequency cepstral coefficient is obtained by weighting log filter bank energies with reliability coefficients and hidden Markov models are also modified to reflect the local reliabilities. Experimental results on TIDIGITS database corrupted by band-limited noises and car noise indicated that the proposed WFBA-MA scheme utilizes the uncorrupted speech information well, significantly improving recognition performance in comparison to multi-band speech recognition systems.

• Journal of Biomedical Engineering Research
• /
• v.26 no.1
• /
• pp.55-63
• /
• 2005

A novel imaging system for High-resolution Ultrasonic Transmission Tomography (HUTT) and soft tissue differentiation methodology for the HUTT system are presented. The critical innovation of the HUTT system includes the use of sub-millimeter transducer elements for both transmitter and receiver arrays and multi-band analysis of the first-arrival pulse. The first-arrival pulse is detected and extracted from the received signal (i.e., snippet) at each azimuthal and angular location of a mechanical tomographic scanner in transmission mode. Each extracted snippet is processed to yield a multi-spectral vector of attenuation values at multiple frequency bands. These vectors form a 3-D sinogram representing a multi-spectral augmentation of the conventional 2-D sinogram. A filtered backprojection algorithm is used to reconstruct a stack of multi-spectral images for each 2-D tomographic slice that allow tissue characterization. A novel methodology for soft tissue differentiation using spectral target detection is presented. The representative 2-D and 3-D HUTT images formed at various frequency bands demonstrate the high-resolution capability of the system. It is shown that spherical objects with diameter down to 0.3㎜ can be detected. In addition, the results of soft tissue differentiation and characterization demonstrate the feasibility of quantitative soft tissue analysis for possible detection of lesions or cancerous tissue.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.360-363
• /
• 1995

In this paper, we describe the composition of frequency response bands based on experimental data of plants (controlled systems) with uncertainty and nonlinearity, and the robust stability evaluation of feedback control systems. Analysis and design of control systems using the upper and lower bounds of such experimental data would be effective as a practicable method which is not heavily dependent upon mathematical models such as the transfer function. First, we present a method to composite gain characteristic bands of frequency response of cascade connected plants with uncertainty and a recurrent inequality for the composition. Next, evaluation methods of the robust stability of multi-loop control systems obtained through feedback from the output terminals and multi-loop control systems obtained through feedback into the input terminals are described. In actual control systems, experimental data of frequency responses often depends on the amplitude of input. Therefore, we present the evaluation method of the nominal value and the width of the frequency response band in such a case, and finally give numerical examples based on virtual experimental data.