• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.9
• /
• pp.623-629
• /
• 2017

Flow structure and mixing characteristics in a micro combustor with a multi-hole baffle were numerically studied using the Reynolds stress model. The multi-hole baffle has geometrical features to produce multiple three-dimensional vortices inside combustion chamber. When the thickness of the baffle's geometrical factors changes, variations of vortical structures occur variously. Among these vortices, the vortex generated from the fuel stream exerts a critical influence on the mixing enhancement. The three-dimensional vortical structure, in its development state, was strongly dependent on the baffle thickness. In particular, as the baffle thickness decreases to values less than the diameter of the fuel hole, the jet stream in baffle holes changes from the parabolic to saddleback profile type. The sizes of recirculation zones inside combustion chamber and the mixing state were closely affected by the structure of the jet streams.

• Journal of Korea Water Resources Association
• /
• v.38 no.5 s.154
• /
• pp.379-390
• /
• 2005

This study is to trace the change of stream shape using the past series of aortal photographs and topographic maps, and to compare the land use changes of inland along the stream. For the Gyeongan first & second class of local stream, aerial photographs of 1966, 1981 and 2000 were selected and ortho photographs were made with interior orientation and exterior orientation, respectively. In addition, topographic maps of 1914 - 1915 were used to compare with stream of 1966, 1981 and 2000. As apparent changes of the stream, the consolidated reaches of stream with levee construction were straightened and their stream width widened. Especially the stream width of inlet part of Paldang lake was widened almost twice because of the rise of water level by dam construction in 1974. The land use maps (1966, 1981, 2000) of riparian areas were also made, respectively and classified into 6 categories (water, forest, agricultural land, urban area, road, sandbar) by digitizing, The main changes of land use were agricultural land, urban area, road and sandbar.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.3
• /
• pp.414-426
• /
• 1997

Numerical computations were conducted to characterize the three-dimensional laminar flow through an injector orifice having an inclined angle of 30 .deg.. For this study, the incompressible Navier-Stokes equations in generalized curvilinear coordinates, using a pseudocompressibility approach for continuity equation, were solved. The computations were performed using the finite difference implicit, approximately factored scheme of Beam and Warming and multi-block grids of complete continuity at block interfaces. The multi-block computations were validated for the steady state using direct comparison of multi-block solutions with equivalent single-block ones, including 2-D 180.deg. TAD and 3-D 90.deg. pipe bend. The comparisons between the numerical solutions and the flow field measurements for a tube with sudden contraction were presented in this work for solution validation. Computational results showed the nature of complex flow fields within the inclined injector orifice, including strong pressure-driven secondary flows in the cross stream induced by the effect of streamline curvature. In addition, asymmetric secondary flows were induced in the Reynolds number range above assumed laminar flow regime considered. However, turbulence calculations and grid dependency studies are needed for more accurate computations.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.847-857
• /
• 2016

Broadcasting services such as multi/single channel HDTV and 3DTV/2DTV use a multi-channel encoder that changes the bitrate and composition of the video service depending on the time. However, this type of multi-channel encoder could cause a longer latency owing to the variable bitrate and relatively bigger size of the buffers, which results in the same delay as in 3DTV even for a conventional DTV service. On the other hand, systems built based on separate encoders, each of which is optimized for the target service, might not have such latency problems. Nevertheless, there might be a distortion problem in the image and sound at the time of a switchover between two encoders with different output bitrates and group of picture structures. This paper proposes a system that can realize a seamless video service conversion using two different video encoders optimized for each video service. An overall functional description of the video service change control server, which is a main control block for the proposed system, is also provided. The experiment results confirm the seamless switchover and reduced broadcasting latency of DTV services compared with a broadcasting system composed of a multi-channel encoder system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1355-1359
• /
• 2004

The two way subscriber transmission systems have tendency to spread its carrier frequency bandwidth or information bit rate and average bit error rate according to popularization of high speed information through the digital communication system, transmission medium and the Internet. This fact is an important incentive to realize new systems. These two way subscriber transmission systems usually use same cable or same carrier frequency bandwidth for up stream channel and down stream channel. In the systems, the disturbances of noise, crosstalk or fading affect the characteristics. Specifically, these disturbances cause the decrease of information bit rate and degradation of transmission quality. This paper proposes the improved method of their degradations using the particular feature of two way subscriber transmission systems and it makes clear proposed method is effective by theoretically and some numerical examples.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.4 no.4
• /
• pp.15-20
• /
• 2007

All of the hydraulic spool valves adopt radially grooved spools to avoid hydraulic locking. In this paper, a commercial computational fluid dynamics (CFD) code, FLUENT is used to investigate the accurate Poiseuille flow characteristics inside single groove. The stream lines, velocity and pressure distributions are obtained for various groove widths, depths and shapes. The stream lines are highly affected by groove shape and there occurred large vortexes inside groove beyond a certain ratio of groove width to depth. Especially the U shaped groove restrains the occurrence of vortex. Therefore the numerical method adopted in this paper can be use in optimum designing of multi-grooved hydraulic spool valves.

• The KSFM Journal of Fluid Machinery
• /
• v.9 no.3 s.36
• /
• pp.44-48
• /
• 2006

Comprehensive experimental works are carried out for the optimal design of a centrifugal blower adopted in an indoor unit of an air-conditioner. The models for consideration are typical multi-blade turbo blower and limit loaded one, respectively. The main interest lies on the fluid dynamics performance when the blower Is installed in the practical system. The methodologies are an experimental estimations with a wind tunnel for blower performance and PIV measurement for the detail flow information. A centrifugal blower with limit loaded fan shows pronounced performances in terms of the flow rate and static pressure rise and the reason is explained by the precise measurement of the flows between blades using PIV. Consequently, it is found that the blower is proper for the flows with a resistance in down stream such as a heat exchanger.

• Journal of Environmental Impact Assessment
• /
• v.18 no.5
• /
• pp.271-280
• /
• 2009

The objective of this study is to develop a reliable flow forecasting model based on neural network algorithm in order to provide flow rate at stream sections without flow measurement in Nakdong river. Stream flow rate measured at 8-days interval by Nakdong river environment research center, daily upper dam discharge and precipitation data connecting upstream stage gauge were used in this development. Back propagation neural network and multi-layer with hidden layer that exists between input and output layer are used in model learning and constructing, respectively. Model calibration and verification is conducted based on observed data from 3 station in Nakdong river.

• Journal of Environmental Science International
• /
• v.16 no.11
• /
• pp.1301-1312
• /
• 2007

The objective of this study is to propose a critical storm duration forecasting model on storm runoff in small river basin. The critical storm duration data of 582 sub-basin which introduced disaster impact assessment report on the National Emergency Management Agency during the period from 2004 to 2007 were collected, analyzed and studied. The stepwise multiple regression method are used to establish critical storm duration forecasting models(Linear and exponential type). The results of multiple regression analysis discriminated the linear type more than exponential type. The results of multiple linear regression analysis between the critical storm duration and 5 basin characteristics parameters such as basin area, main stream length, average slope of main stream, shape factor and CN showed more than 0.75 of correlation in terms of the multi correlation coefficient.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11a
• /
• pp.167-170
• /
• 2002

본 고의 Multi-Media Caching System 은 이동 단말기의 보급 & 발달로 예상되는 Trans-coder 부하의 증가와 응답 시간 개선 하기 위한 것으로 기존의 Web 문서의 Caching System 과 비교 분석 하고, 빈번한 이동 단말기의 요구에 의해서 발생하는 않은 trans-coder 작업을 최소화 할 수 있는 XML 기반의 Caching System을 연구 하고자 한다. 즉, 기존의 Web Caching System의 장점과 XML의 재 사용 성, 확장 성, 플랫폼 독립성, 다양한 종류의 응용 프로그램과의 접목성 등의 장점을 살리고, Cache System Manager에 의해 최소환의 Trans-coder 동작이 일어나도록 한다. 따라서 Trans-coder 된 작업을 Caching System 에 보관 관리 하는 최적의 Caching System Manager 방법을 제안하고자 한다.