• Food Science and Biotechnology
• /
• 제15권6호
• /
• pp.844-850
• /
• 2006

This study was designed to compare various quality characteristics, such as nutrient composition and physicochemical and sensory properties of freeze-concentrated milk made by a newly developed continuous multi-stage process with those of evaporated milk. The freeze concentration process reduced the water content up to 73%. Most of the physicochemical properties of evaporated milk were different from raw milk; however the freeze-concentrated milk showed little difference from the raw milk. The thiobarbituric acid value and free fatty acid concentrations were significantly greater in the evaporated milk than in the freeze-concentrated milk. Several effects on sensory characteristics, such as off-taste, were significantly stronger in the evaporated milk. Overall, this study indicates that the newly developed freeze concentration technique results in improved physicochemical and sensory properties, and has little effect on most nutrient levels when compared with the evaporation process. Further research is necessary to further elucidate the chemical and sensory properties of freeze-concentrated milk.

• 한국기계가공학회지
• /
• 제2권2호
• /
• pp.14-21
• /
• 2003

Rapid prototyping(RP) has been used for design verification and proto sample or mold manufacturing. Many RP systems have been introduced into the market during the past 15 years. However, until now, the systems have used mainly for external physical models (mono function), and have the basic but critical limitation of one material on one stage (mono material). To overcome the limitations of mono-material and mono-function of conventional. RP systems, the concept of Functional Phototype Development (FPD) is newly proposed in this paper FPD provides the necessary prototype functions such as mechanical, optical, chemical and electrical properties in order to meet the broad requirements of the industry. The paper illustrates the representative achievements of electronic components such as the multi-layer printed circuit board(MLB). Experimental results demonstrate that FPD has great potential applied to broad industrial uses and that It Will be a powerful tool in the neat future.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 춘계학술대회논문집
• /
• pp.93-100
• /
• 1996

In this paper, a computer simulationtechnique for the forging process having a spring-attached die was presented . The penalty rigid-thermoviscoplastic finite element method was empolyed together with an interatively force-balancing method, in which the convergence was achieved when the forming load and the spring reaction force are in equilibrium within the user-specified allowable accuracy. The force balance was controled by adjusting the velocity of the spring-attched die. th minimize the number of internations, a velocity estimating schemewas proposed. Two application examples found in the related company were given. In the first application example, the predicted metal folw lines were compared with the acturally forged ones. in the second example, a hot forging process with a spring-attached die was simulated and the analyzed results were discussed in order to investigated the effects of spring-attached dies on the metal flow lines and the forming loads.

• 소성∙가공
• /
• 제17권8호
• /
• pp.627-632
• /
• 2008

The cross sectional shape of intermediate die is one of important parameters to improve dimensional accuracy of final product in shaped drawing process. Until now, it has been designed by the experience or trial and error of the expert. In this study, the cross sectional shape of intermediate die for spline shape is determined by the electric fields analysis and scale factor method. The result of the electric fields analysis and scale factor method have been compared with that of the expert method. The effects of cross sectional shape on the dimensional accuracy were investigated by using FE-simulation. And then the multi-stage shaped drawing experiments were performed to verify the results of FE-simulation. As a result, the cross sectional shape from the electric fields analysis and scale factor method had the good dimensional accuracy. These two methods can be used for the method to obtain the cross sectional shape of intermediate die in shaped drawing process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.834-837
• /
• 2005

This study presents a study on the influence of process parameters(semi-die angle, die reduction, friction condition, and bearing length) in drawn wire on residual stresses were investigated using FE-analysis. In this study, semi-die angle and die reduction have a significant effect on the residual stresses at the surface of drawn wire. In the previous study, in order to reduce the residual stresses, several methods were suggested: addition of axial tension, application of skin pass, straightening in multi-roll straightener etc. In this study, it can be known that the concurrent application of skin pass with low die reduction and low semi-die angle at the final stage of drawing operation reduces dramatically the both axial and hoop residual stresses after drawing.

• 한국태양에너지학회 논문집
• /
• 제35권1호
• /
• pp.29-34
• /
• 2015

The photovoltaic ribbon attached the flux reduces the solar module manufacturing process and the pollution. This paper presents an analytical method for solving the continuous flux drying system of photovoltaic ribbon. Also, some experiments of the drying of photovoltaic ribbon are carried out in order to design the drying system. Numerical results indicate the air temperature, the air velocity, the air pressure and the timewise temperature variation of ribbon during drying process. In case of the drier process length is short, 400mm, the photovoltaic ribbon is wet. Thus, another study of drying system is necessary to improve the drying ability. As a result, multi-stage drier system is proposed and shown to be good drying ability.

• 천문학회보
• /
• 제44권2호
• /
• pp.68.2-68.2
• /
• 2019

Most of the stellar mass accretes during the early evolutionary stage of protostars. However, the accretion process in protostars is in a veil of the thick envelope. Monitoring the submillimeter emission from the envelope is a way to trace the accretion process in protostars since the submillimeter emission linearly responses to the temperature of the envelope, which is heated by the accretion process at the center. In the JCMT transient Survey, we detected a submillimeter variable, EC 53. EC 53 is a Class 1 protostar that was known to have a periodic variation at NIR. EC 53 has been monitored with United Kingdom InfraRed Telescope (UKIRT), Liverpool telescope, and JCMT/SCUBA-2 since we detected the 850 ㎛ flux enhancement in the JCMT transient survey. We also adopt the photometric data sets of Wide-field Infrared Survey Explorer (WISE). Over all wavelengths from NIR to submillimeter, we see two modes of variation, a 1.5-years periodic variation and a long-term increase. We present the light curves of EC 53 at multi-wavelengths and discuss the cause of variability in EC 53.

• 한국정보전자통신기술학회논문지
• /
• 제9권4호
• /
• pp.419-427
• /
• 2016

본 논문에서는 저면적 64bit MTP IP를 설계하였다. 저면적 설계기술로는 MTP cell의 inhibit voltage를 기존의 VPP/3과 VNN/3 전압 대신 모두 0V를 사용하므로 VPPL(=VPP/3) regulator 회로와 VNNL(VNN/3) charge pump 회로를 제거하였다. 그리고 external pad를 이용하여 VPP program voltage를 forcing하므로 VPP charge pump 회로를 제거하였다. 또한 VNN charge pump는 VPP 전압을 이용하여 1-stage negative charge pump 회로로 pumping해서 -VPP의 전압을 공급하도록 설계를 하였다. 설계된 64bit MTP IP size는 $377.585{\mu}m{\times}328.265{\mu}m$(=0.124mm2)이며, DC-DC converter관련 layout size는 기존의 회로 대비 76.4%를 줄였다.

• 자원리싸이클링
• /
• 제24권4호
• /
• pp.50-55
• /
• 2015

본 연구에서는 LED 칩 제조를 위해 이용되는 유기금속화학증착(MOCVD) 장비에서 발생하는 분진(dust)으로부터 용매추출을 통해 고순도 갈륨(Ga) 함유 수용액을 회수하는 연구를 수행하였다. 추출제 종류, 추출제의 농도 변화에 대한 연구를 통해 Ga 추출에 효과적인 추출제를 선정하고자 하였으며 다단계 추출/역추출 공정을 통해 추출 효율을 향상시켜 고순도 Ga 수용액을 제조하였다. 선행연구에서 원료에 대한 분석을 바탕으로 Ga의 추출 및 분리를 위해 PC88A, DP-8R, Cyanex 272 추출제 중 Cyanex 272를 선택하였으며 1.5M일 때 43.8%의 효율이 나타났다. 다단계 추출을 통해 Ga의 추출 효율은 83%까지 상승하였으며 0.1 M HCl을 이용한 역추출 공정으로 불순물이 없는 5N급 고순도 Ga 수용액을 제조할 수 있었다.

• 한국통신학회논문지
• /
• 제30권6C호
• /
• pp.560-569
• /
• 2005

본 논문은 순차적인 간섭제거와 전송 안테나 별 전송률을 제어하는 공간 다중화 전송 MIMO 시스템에서 채널환경에 따라 전송에 사용되는 안테나를 선택하고 데이터 율을 조절하는 알고리즘을 제안한다. 수신기에서 전송에 사용될 송신 안테나 및 전송률을 결정하고, 이는 각 송신 안테나 별 전송률에 대한 피드백 채널을 통해 송신기로 전송된다. 본 연구에서는 각 단계에서 최소의 SINR을 가지는 안테나를 제거해가는 연속적인 단계들로 이루어진 직렬 결정 방식을 제안한다. 또한, 각 연속적인 심볼 추정 단계에서 가장 낮은 신호 대 간섭 비를 갖는 심볼을 먼저 추정하는 "reverse detection ordering"이 각 안테나에 할당되는 용량 차이를 증가시킴으로서 안테나 선택에 의한 이득을 증가시킴을 보인다. 시뮬레이션 결과는 제안된 "reverse detection ordering"을 기반으로 하는 직렬 결정 방식이 낮은 복잡도을 가지면서 heuristic 방식과 비슷한 용량을 제공함을 보여준다.