• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.94-106
• /
• 2022

In order to increase timber self-sufficiency, Korea's 6th Basic Forest Plan aims to increase the density of forest roads to 12.8 m ha^-1 by 2037. However, due to rapid re-forestation, current management infrastructure is insufficient, with just 4.8 m ha^-1 of forest roads in 2017. This is partly due to time and cost limitations on the process of forest road feasibility evaluation, which considers factors such as topography and forest conditions. To solve this problem, we propose an eco-friendly and efficient forest road network planning method using a geographic information system (GIS), which can evaluate a potential road site remotely based on spatial information. To facilitate such planning, this study identifies forest road construction priorities that can be evaluated using spatial information, such as topography, forest type and forest disasters. A method of predicting the optimal route to connect a forest road with existing roads is also derived. Overlapping analysis was performed using GIS-MCE (which combines GIS with multi-criteria evaluation), targeting the areas of Cheongsong-gun and Buk-gu, Pohang-si, which have a low forest-road density. Each factor affecting the suitability of a proposed new forest road site was assigned a cost, creating a cost surface that facilitates prioritization for each forest type. The forest path's optimal route was then derived using least-cost path analysis. The results of this process were 30 forestry site recommendations in Cheongsong-gun and one in Buk-gu, Pohang-si; this would increase forest road density for the managed forest sites in Cheongsong-gun from 1.58 m ha^-1 to 2.55 m ha^-1. This evaluation method can contribute to the policy of increasing timber self-sufficiency by providing clear guidelines for selecting forest road construction sites and predicting optimal connections to the existing road network.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.247-251
• /
• 2004

반도체 소자의 제조에 있어 실리콘 표면에 성장한 자연산화막을 제거하기 위해 일반적으로 습식 세정 기술이 이용되어 왔다. 하지만 소자의 최소 선폭(design rule)이 nano급으로 고집적화 됨에 따라 contact hole 바닥의 자연산화막을 깨끗이 제거하는데 있어서 그 한계를 나타나고 있다. 이에 대한 효과적인 대안 공정으로 가스 건식 세정 기술이 연구되고 있다. 본 논문에서는 한 번에 50매 이상의 웨이퍼를 처리함으로써 생산성 측면에서 월등한 배치식 설비에서 원거리 플라즈마(remote plasma) 장치에서 2.450Hz의 마이크로웨이브(${\mu}$-wave)에 의해 형성시킨 수소라디칼과 $NF_3$ 가스를 이용하여 실리콘에 결함을 주지 않고 자연산화막을 선택적으로 제거하는 공정에 대해 고찰하였다. AFM을 이용한 표면분석, TEM을 이용한 물성분석, 그리고 ToF-SIMS 및 XPS를 이용한 화학 분석을 습식 및 건식 세정을 비교 평가한 결과, 건식 세정 공정이 실리콘 표면에 결함을 주지 않고 자연산화막을 제거 할 수 있음을 확인하였다. 산화막$(SiO_2)$, 질화막$(Si_3N_4)$, 그리고 다결정 실리콘(Poly-Si) 등의 각 막질별 식각 특성을 고찰하였으며, $NH_3$의 캐리어 가스인 $N_2$의 주입량을 조절함으로써 수소라디칼 형성 효율의 개선이 가능하였으며, 이로부터 게이트와 소스/드레인 사이를 절연하기 위해 이용되는 질화막의 식각 선택비를 2배 정도 개선할 수 있었다. nano급 소자에 실장하여 평가한 결과에서 불산(HF)에 의한 습식 세정 방식에 비하여 약 $20{\sim}50%$ 정도의 contact 저항 감소 효과가 있음이 확인되었다.두 소자 모두 $40mA/cm^2$ 에서 이상적인 화이트 발란스와 같은(0.33,0.33)의 색좌표를 보였다.epsilon}_0=1345$의 빼어난 압전 및 유전특성과 $330^{\circ}C$의 높은 $T_c$를 보였고 그 조성의 vibration velocity는 약4.5 m/s로 나타났다.한 관심이 높아지고 있다. 그러나 고 자장 영상에서의 rf field 에 의한 SAR 증가는 중요한 제한 요소로 부각되고 있다. 나선주사영상은 SAR 문제가 근원적으로 발생하지 않고, EPI에 비하여 하드웨어 요구 조건이 낮아 고 자장에서의 고속영상방법으로 적합하다. 본 논문에서는 고차 shimming 을 통하여 불균일도를 개선하고, single shot 과 interleaving 을 적용한 multi-shot 나선주사영상 기법으로 $100{\times}100$에서 $256{\times}256$의 고해상도 영상을 얻어 고 자장에서 초고속영상기법으로 다양한 적용 가능성을 보였다. 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는 피험자의 머리 움직임에 의하여 도파민 유리가 과대평가되었으며 이는 이 연구에서 제안한 영상정합을 이용한 움직임 보정기법에 의해서 개선되었다. 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으로 보고, 수학적 창의성 중 특히 확산적 사고에 초점을 맞추어 개방형 문제가 확

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.19
• /
• pp.8311-8317
• /
• 2014

Background: Evidence supporting an association between the 8q24 rs4242382-A polymorphism and prostate cancer (PCa) risk has been reported in North American and Europe populations, though data from Asian populations remain limited. We therefore investigated this association by clinical detection in China, and meta-analysis in Asian, Caucasian and African-American populations. Materials and Methods: Blood samples and clinical information were collected from ethnically Chinese men from Northern China with histologically-confirmed PCa (n=335) and from age-matched normal controls (n=347). The 8q24 (rs4242382) gene polymorphism was genotyped by polymerase chain reaction-high-resolution melting analysis. We initially analyzed the associations between the risk allele and PCa and clinical covariates. A meta-analysis was then performed using genotyping data from a total of 1,793 PCa cases and 1,864 controls from our study and previously published studies in American and European populations, to determine the association between PCa and risk genotype. Results: The incidence of the risk allele was higher in PCa cases than controls (0.222 vs 0.140, $P=7.3{\times}10^{-5}$), suggesting that the 8q24 rs4242382-A polymorphism was associated with PCa risk in Chinese men. The genotypes in subjects were in accordance with a dominant genetic model (ORadj=2.03, 95%CI: 1.42-2.91, $Padj=1.1{\times}10^{-4}$). Presence of the risk allele rs4242382-A at 8q24 was also associated with clinical covariates including age at diagnosis ${\geq}65$ years, prostate specific antigen >10 ng/ml, Gleason score <8, tumor stage and aggressive PCa, compared with the non-risk genotype ($P=4.6{\times}10^{-5}-3.0{\times}10^{-2}$). Meta-analysis confirmed the association between 8q24 rs4242382-A polymorphism and PCa risk (OR=1.62, 95%CI: 1.39-1.88, $P=1.0{\times}10^{-5}$) across Asian, Caucasian and African American populations. Conclusions: The replicated data suggest that the 8q24 rs4242382-A variation might be associated with increased PCa susceptibility in Asian, Caucasian and African American populations. These results imply that this polymorphism may be a useful risk biomarker for PCa in multi-ethnic populations.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.6
• /
• pp.469-477
• /
• 2008

Purpose: The goal of this paper is to present the design and performance of a position encoding circuit for $16{\times}16$ array of position sensitive multi-anode photomultiplier tube for small animal PET scanners. This circuit which reduces the number of readout channels from 256 to 4 channels is based on a charge division method utilizing a resistor array. Materials and Methods: The position encoding circuit was simulated with PSpice before fabrication. The position encoding circuit reads out the signals from H9500 flat panel PMTs (Hamamatsu Photonics K.K., Japan) on which $1.5{\times}1.5{\times}7.0\;mm^3$ $L_{0.9}GSO$ ($Lu_{1.8}Gd_{0.2}SiO_{5}:Ce$) crystals were mounted. For coincidence detection, two different PET modules were used. One PET module consisted of a $29{\times}29\;L_{0.9}GSO$ crystal layer, and the other PET module two $28{\times}28$ and $29{\times}29\;L_{0.9}GSO$ crystal layers which have relative offsets by half a crystal pitch in x- and y-directions. The crystal mapping algorithm was also developed to identify crystals. Results: Each crystal was clearly visible in flood images. The crystal identification capability was enhanced further by changing the values of resistors near the edge of the resistor array. Energy resolutions of individual crystal were about 11.6%(SD 1.6). The flood images were segmented well with the proposed crystal mapping algorithm. Conclusion: The position encoding circuit resulted in a clear separation of crystals and sufficient energy resolutions with H9500 flat-panel PMT and $L_{0.9}GSO$ crystals. This circuit is good enough for use in small animal PET scanners.

• The Korean Journal of Pesticide Science
• /
• v.20 no.3
• /
• pp.211-220
• /
• 2016

This study was to develop the analytical reference material of green-pepper for multi-residue analysis of pesticides. According to the ISO Guide 35, ISO Guide 13528 and EURL-PT protocol, the homogeneity, stability, assigned value and uncertainty were calculated to assess if it was suitable to be used as the proficiency test or quality control. The values of the within-bottle standard variation ($s_{wb}$) and the between-bottle standard variation ($s_{bb}$) were 1.7~3.7% of assigned value according to the requirement of the ISO guide 35. And, the uncertainty ($u^*{_{bb}}$) due to inhomogeneity was 0.8~1.1% for all pesticides. The storage stabilities of ten-pesticides at various conditions were assessed. For all target pesticides, the slop ($b_1$) values were smaller than the corresponding values of $[t_{0.95,n-2}{\times}s(b_1)]$ specified by the ISO guide 35, indicating that there were no statistically significant decreases in the concentration of the target pesticides when the analytical reference material was stored at room temperature ($20{\sim}30^{\circ}C$) for 7 days, freezing ($-20^{\circ}C$) for 30 days and deep freezer ($-80^{\circ}C$. except for bifenthrin, fenpropathrin) for 245 days. For proficiency test by using it developed by Korea Institute of Toxicology, inter-lab test was performed with eight organization performing the residual pesticide analysis. We found that there were some different results among them. Some were assessed as questionable or unacceptable for two pesticides and one organization didn't analyze the six pesticides. From these results, this green-pepper analytical reference material containing ten-pesticides could be used as a tool for the proficiency test to improve the reliability or consistency for pesticide residue's results.

• Health Policy and Management
• /
• v.27 no.2
• /
• pp.167-176
• /
• 2017

Background: This study aimed to analyze the impact of community health care resources on the place of death of older adults with dementia compared to those with cancer in South Korea, using public administrative big data. Methods: Based on a literature review, we selected person- and community-level variables that can affect older people's decisions about where to die. Data on place-of-death and person-level attributes were obtained from the 2013 death certification micro data from Statistics Korea. Data on the population and economic and health care resources in the community where the older deceased resided were obtained from various open public administrative big data including databases on the local tax and resident population statistics, health care resources and infrastructure statistics, and long-term care (LTC) insurance statistics. Community-level data were linked to the death certificate micro data through the town (si-gun-gu) code of the residence of the deceased. Multi-level logistic regression models were used to simultaneously estimate the impacts of community as well as individual-level factors on the place of death. Results: In both the dementia (76.1%) and cancer (87.1%) decedent groups, most older people died in the hospital. Among the older deceased with dementia, hospital death was less likely to occur when the older person resided in a community with a higher supply of LTC facility beds, but hospital death was more likely to occur in communities with a higher supply of LTC hospital beds. Similarly, among the cancer group, the likelihood of a hospital death was significantly lower in communities with a higher supply of LTC facility beds, but was higher in communities with a higher supply of acute care hospital beds. As for individual-level factors, being female and having no spouse were associated with the likelihood of hospital death among older people with dementia. Conclusion: More than three in four older people with dementia die in the hospital, while home is reported to be the place of death preferred by Koreans. To decrease this gap, an increase in the supply of end-of-life (EOL) care at home and in community-based service settings is necessary. EOL care should also be incorporated as an essential part of LTC. Changes in the perception of EOL care by older people and their families are also critical in their decisions about the place of death, and should be supported by public education and other related non-medical, social approaches.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.6
• /
• pp.225-229
• /
• 2011

Most of the silicon cutting methods using the multi-wire with the slurry injection have been used for wafers of the crystalline solar cell. But the productivity of slurry injection cutting type falls due to low cutting speeds. Also, the direct contact with the metal wire and silicon block increases the concentration of metallic impurities in the wafer's surface. In addition, the abrasive silicon carbide (SiC) generates pollutants. And production costs are rising because it does not re-use the worn wire. On the other hand, the productivity of the cutting method using the diamond coated wire is about 2 times faster than the slurry injection cutting type. Also, the continuous cutting using the used wire of low wear is possible. And this is a big advantage for reduced production costs. Therefore, the cutting method of the diamond coated wire is more efficient than the slurry injection cutting technique. In this study, each cutting type is analyzed using the surface characteristics of the solar wafer and will describe the effects of the manufacturing process of the solar cell. Finally, we will suggest improvement methods of the solar cell process for using the diamond cutting type wafer.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.8
• /
• pp.1083-1094
• /
• 2016

Carcass and price traits of 72,969 Hanwoo cows, bulls and steers aged 16 to 80 months at slaughter collected from 2002 to 2013 at 75 beef packing plants in Korea were analyzed to determine heritability, correlation and breeding value using the Multi-Trait restricted maximum likelihood (REML) animal model procedure. The traits included carcass measurements, scores and grades at 24 h postmortem and bid prices at auction. Relatively high heritability was found for maturity ($0.41{\pm}0.031$), while moderate heritability estimates were obtained for backfat thickness ($0.20{\pm}0.018$), longissimus muscle (LM) area ($0.23{\pm}0.020$), carcass weight ($0.28{\pm}0.019$), yield index ($0.20{\pm}0.018$), yield grade ($0.16{\pm}0.017$), marbling ($0.28{\pm}0.021$), texture ($0.14{\pm}0.016$), quality grade ($0.26{\pm}0.016$) and price/kg ($0.24{\pm}0.025$). Relatively low heritability estimates were observed for meat color ($0.06{\pm}0.013$) and fat color ($0.06{\pm}0.012$). Heritability estimates for most traits were lower than those in the literature. Genetic correlations of carcass measurements with characteristic scores or quality grade of carcass ranged from -0.27 to +0.21. Genetic correlations of yield grade with backfat thickness, LM area and carcass weight were 0.91, -0.43, and -0.09, respectively. Genetic correlations of quality grade with scores of marbling, meat color, fat color and texture were -0.99, 0.48, 0.47, and 0.98, respectively. Genetic correlations of price/kg with LM area, carcass weight, marbling, meat color, texture and maturity were 0.57, 0.64, 0.76, -0.41, -0.79, and -0.42, respectively. Genetic correlations of carcass price with LM area, carcass weight, marbling and texture were 0.61, 0.57, 0.64, and -0.73, respectively, with standard errors ranging from ${\pm}0.047$ to ${\pm}0.058$. The mean carcass weight breeding values increased by more than 8 kg, whereas the mean marbling scores decreased by approximately 0.2 from 2000 through 2009. Overall, the results suggest that genetic improvement of productivity and carcass quality could be obtained under the national scale breeding scheme of Korea for Hanwoo and that continuous efforts to improve the breeding scheme should be made to increase genetic progress.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.759-768
• /
• 2015

The ground motions of large dimensional structures such as long span bridges at different stations during an earthquake, are inevitably different, which is known as the ground motion spatial variation effect. There are many causes that may result in the spatial variability in seismic ground motion, e.g., the wave passage effect due to the different arrival times of waves at different locations; the loss of coherency due to seismic waves scattering in the heterogeneous medium of the ground; the site amplification effect owing to different local soil properties. In previous researches, the site amplification effects have not been considered or considered by a single-layered soil model only. In this study, however, the ground motion amplification and filtering effects are evaluated by multi-layered soil model. Spatially varying ground motion at the sites with different number of layers, depths, and soil characteristics are generated and the variation characteristics of ground motion time histories according to the correlation of coherency loss function and soil conditions are evaluated. For the bridge system composed of two unit bridges, seismic behavior characteristics are analyzed using the generated seismic waves as input ground motion. Especially, relative displacement due to coherency loss and site effect which can cause the unseating and pounding between girders are evaluated. As a result, considering the soil conditions of each site are always important and should not be neglected for an accurate structural response analysis.

• Journal of Korea Water Resources Association
• /
• v.44 no.4
• /
• pp.285-293
• /
• 2011

This study presents effects of downstream control point by coupled operation of dams and multi function weirs in the Geum River. Geum river basin that study area did authoritativeness high quality data to acquisition possibility. We applied the flow duration curve, flow regime coefficient, impounded flow index analysis to investigate the quantitative changes in natural flow regimes. In sphere that water supply is possible, this study applied believability that satisfy 95% at estimation year. Impounded flow index was calculated 0.292 by dam coupled operation and 0.297 by dam-weir coupled operation. The results indicate that the storage amount is increased by 29.7% as being added. Duration flow of downstream control point was improved because became coupled operation by regulation of dam and weir in the geum river.