• Steel and Composite Structures
• /
• v.36 no.1
• /
• pp.87-101
• /
• 2020

A multi-scale epoxy/CNT/fiberglass annular sector plate is studied in this paper in the view of determining nonlinear forced vibration characteristics. A 3D Mori-Tanaka model is employed for evaluating multi-scale material properties. Thus, all of glass fibers are assumed to have uni-direction alignment and CNTs have random diffusion. The geometry of annular sector plate can be described based on the open angle and the value of inner/outer radius. In order to solve governing equations and derive exact forced vibration curves for the multi-scale annular sector, Jacobi elliptic functions are used. Obtained results demonstrate the significance of CNT distribution, geometric nonlinearity, applied force, fiberglass volume, open angle and fiber directions on forced vibration characteristics of multi-scale annular sector plates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10A
• /
• pp.980-989
• /
• 2002

In this paper, we have proposed the sectorization method of the adaptive sector antenna and the new receiver structure for the CDMA wireless multi-media communication which uses multi-code and single-code. The sectorization and average BER performance of the adaptive sector antenna, which employs the proposed sectorization method, are obtained through simulation. The simulation results have shown that the sizes of sectors are properly controlled according to the distribution of the load and that the BER performance of the adaptive sector antenna is enhanced much more than that of the fixed sector antenna. Also, we have proposed two receivers, which are different from the positions to detect multi-code signals, for the multi-media communication. Each receiver has a simple cancellation scheme and two adaptive sector antennas, which are called the 1st adaptive sector antenna and the 2nd adaptive sector antenna, respectively. In this paper, the average BER performances of the receivers are compared through simulation. As the results of the simulation, we have recognized that all user' BER performances are greatly dependent on the positions to detect the multi-code signals. When we consider both system complexity and terget BERs of signals, we have concluded that the receiver, which detect multi-code signals in the 1st and the 2nd adaptive sector antenna, is appropriate for the CDMA wireless multi-media communication systems.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.11
• /
• pp.983-988
• /
• 2015

This paper details a new ultra-precise turning method for increasing surface quality, "Multi Point B Axis Control Method." Machined surface error is minimized by the compensation machining process, but the process leaves residual chip marks and surface roughness. This phenomenon is unavoidable in the diamond turning process using existing machining methods. However, Multi Point B axis control uses a small angle (< $1^{\circ}$) for the unused diamond edge for generation of ultra-fine surfaces; no machining chipping occurs. It is achieved by compensated surface profiling via alignment of the tool radial center on the center of the B axis rotation table. Experimental results show that a diamond turned surface using the Multi Point B axis control method achieved P-V $0.1{\mu}m$ and Ra 1.1nm and these ultra-fine surface qualities are reproducible.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5A
• /
• pp.469-474
• /
• 2006

In this paper, we develop a method that derive the average sector throughput of HSDPA system. This proposed method reflects the effects of AMC, scheduling and multi-code transmission, and is performed by simple calculation procedures such as link budget analysis. Link budget table is used to estimate a cell coverage in general. We modify the link budget table in order to calculate C/I of the user according to the location of the user in CDMA packet system employing AMC. Furthermore, we utilize the proposed method to analyze the effects of scheduling and multi-code transmission.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.2
• /
• pp.94-103
• /
• 1991

This study was carried out to investigate the engineering characteristics of the R.C circular ring sector plate with various boundary conditions and then to propose a rational and paraical method for application of finite element method to R.C structures. The stiffness matrix of the circular ring sector plate was obtained by using the multi-base coordinate system in which the base-coordinate systems were constructed for each nodal point of the quadrilateral element in order to reflect the complicated boundary conditions conveniently and correctly. The R.C element stiffness matrix was constructed by adding the stiffness coefficients of the steel-bar element into the plate bending element stiffness matrix. Herein, the steel-bar element was treated as the common beam element. Using the above method, the effects of steel-bar can be considered without increasing of the numbers of element and nodal points.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.6
• /
• pp.524-529
• /
• 2006

In this paper, we propose a method to design variable structure systems with sliding sector for multi-input multi-output systems with mismatched uncertainties in the state matrix. For the uncertain systems we define sliding sectors within which a norm of the state decreases with zero input despite of mismatched uncertainties. Using the notion of the sliding sector we give simple design algorithms of variable structure control laws that can reduce the chattering. Finally, we give a design example in order to show the effectiveness of our method.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.258-264
• /
• 1999

In this study, a computer program was developed for analysis of the orthotropic curved ring sector plates. In the developing program , the thin-plate theory and multi-base coordinate system was adopted. The effect of design factors-boundary conditions, loading conditions, steel ratio, open angle, radius of curvature and relative flexural rigidity between slab and edge-beam-on the behavior of the circular ring sector plates were discussed. Also, the practical limitations was proposed to replace the problem of the orthotropic sector plate by equivalent rectangular plage.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.1-7
• /
• 2009

In this paper, the author presents the MIMO(Multi-Input Multi-Output) receiver algorithm with the capability of inter-cell or inter-sector interference cancellation over multi-antenna OFDM(Orthogonal Frequency Division Multiplexing) systems. As contrast with the previous research dealing with the filtering scheme at the time domain, the proposed algorithm is presented as the pre-filtering scheme which can be applicable to the frequency domain. Note that the proposed one can be implemented only by pilot symbols which are used in the channel estimation. In addition, it is analytically confirmed that the proposed scheme can be applied for either MIMO( C-SM(Collaborative-Spatial Multiplexing)) interference or SIMO(Single-Input Multi-Out) interference. The proposed receiver algorithm is verified by simulations over UL-PUSC SR off in IEEE 802.16e standard. From simulation results, it is confirmed that the proposed one can be applicable regardless of the kind of interference. Furthermore, it is verified that the performance is guaranteed even under Ole severe effect of interference and the improvement of system throughput is guaranteed.

• IE interfaces
• /
• v.18 no.4
• /
• pp.418-430
• /
• 2005

We establish an efficient strategy for construction and operation of data consolidation center for multi-organization in public sector. First, we introduce important concepts on data consolidation center in public sector, and draw some success factors by analyzing several foreign and domestic cases. Second, we construct all the possible logical operational models of the center and investigate the properties and feasibility of the models. Third, we suggest a virtual operational environment for the two representative models selected by feasibility criteria among the possible logical models, and compare the two models in terms of operational cost. We also utilize AHP methodology to evaluate qualitative opinions on the two models from several experts in public information systems. As a result, we find the best alternative is the case in which all infrastructure and facilities for the center are provided by government, and common essential IT operations are integrated, associated data are consolidated and the whole operational work are outsourced to specialized IT operations service providers.

• Journal of KIISE:Information Networking
• /
• v.37 no.4
• /
• pp.294-300
• /
• 2010

In this paper, We analysis of effective coverage extension for Tri-sector cellular systems using Multi-hop Relay based on IEEE802.16j system. In the proposed international standard of IEEE 802.16j MMR (Mobile Multi-hop Relay) use of the omni-directional antenna, 3-sector and 6-sector antenna is considered to Base Station and Relay Station. Omni-directional antenna service can offer as all directions but a throughput decreases due to the signal interference of near Relay Stations. In the directional antenna, cause of an interference with the base station which it arranges an antenna so that a beam can have the direct and does with neighbor Base Station and Relay Station can be reduced interference, therefore the effective throughput is higher than the omni-directional antenna system. But, In case of Base Station and Relay Station use the directional antenna, the efficiency which the directional antenna has the Co-channel interference due to in the different cell by the channel reuse is decreased. In this study, we propose the structure of arranging the Base Station and Relay Station having the directional antenna in the NBTC, WBTC antenna in a multi-tier. It compared and analyzed with the mode that the multi-hop Relay Station has the omni-directional antenna, Relay Station are used the NBTC antenna and the WBTC antenna system also, We analyze a relation between the performance degradation and the cell coverage extension which it follows because the number of hop in the multi-hop Relay Station.