• Journal of Biosystems Engineering
• /
• 제21권1호
• /
• pp.3-9
• /
• 1996

Sowing with an automatic seed metering device is increasing in popularity. Since 100% planting is not likely, a major problem is to find any place which contains no seeds between row spacings in the agricultural field. Automatic sowing technology, including the implementation of a microcomputer, appears to be an attractive alternative to the use of manual labor for accomplishing this task. Thus, the multi-purpose seeder attached to a cultivator was designed and constructed with an automatic seed metering device. This seeder proved to be a reliable system for sowing seeds in the agricultural field. Multi-purpose seeder for cultivator consists of an automatic seed metering device, a trench device, a covering device, and a press wheel

• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.36-48
• /
• 1997

In order to establish the ignition system for lean burn, the influence of the number of spark plug, spark times and spark intervals on discharge pattern of spark energy on ignitability and combustion characteristics were evaluated. It showed that, ignitability remarkably increased with the case of multiple spark ignition system than with the case of single spark and the lean limit extended fuel/air equivalence ratio by 0.1, the increase of magnitude and lasting time of capacity component and inductance component was multi spark discharge in a row.

• 한국분무공학회지
• /
• 제14권1호
• /
• pp.8-14
• /
• 2009

This paper present the diesel fuel spray evolution and atomization performance in a multi-hole nozzle in terms of injection rate, spray evolutions, and mean diameter and velocity of droplets in a compression ignition engine. In order to study the effect of split injection on the diesel fuel spray and atomization characteristic in a multi-hole nozzle, the test nozzle that has two-row small orifice with 0.2 mm interval was used. The time based fuel injection rate characteristics was analyzed from the pressure variation generated in a measuring tube. The spray characteristics of a multi-hole nozzle were visualized and measured by spray visualization system and phase Doppler particle analyzer (PDPA) system. It was revealed that the total injected fuel quantities of split injection are smaller than those of single injection condition. In case of injection rate characteristics, the split injection is a little lower than single injection and the peak value of second injection rate is lower than single injection. The spray velocity of split injection is also lower because of short energizing duration and small injection mass. It can not observe the improvement of droplet atomization due to the split injection, however, it enhances the droplet distributions at the early stage of fuel injection.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1188-1198
• /
• 2015

In this paper, a multi-time programmable (MTP) cell based on a $0.18{\mu}m$ bipolar-CMOS-DMOS backbone process that can be written into by using dual pumping voltages - VPP (boosted voltage) and VNN (negative voltage) - is used to design MTP memories without high voltage devices. The used MTP cell consists of a control gate (CG) capacitor, a TG_SENSE transistor, and a select transistor. To reduce the MTP cell size, the tunnel gate (TG) oxide and sense transistor are merged into a single TG_SENSE transistor; only two p-wells are used - one for the TG_SENSE and sense transistors and the other for the CG capacitor; moreover, only one deep n-well is used for the 256-bit MTP cell array. In addition, a three-stage voltage level translator, a VNN charge pump, and a VNN precharge circuit are newly proposed to secure the reliability of 5 V devices. Also, a dual memory structure, which is separated into a designer memory area of $1row{\times}64columns$ and a user memory area of $3rows{\times}64columns$, is newly proposed in this paper.

• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.551-563
• /
• 2019

본 연구는 청주시의 1970년대에 시행된 4개의 토지구획정리사업지구를 대상으로 하며, 물리적 측면에서 가구체계의 개념을 통해 지구특성을 파악하는 것을 목적으로 한다. 연구 결과 첫째, 가구의 가로 특성을 보면, 4개 지구 동일하게 현재의 도시개발 기준 대비 간선도로망과 가구로의 진입을 위한 국지도로체계는 잘 갖춰져 있는 것으로 파악되었다. 그러나 가구내의 개별필지로의 진입로가 제대로 갖춰지지 않아 개별 필지 별 건축이 어려운 상황으로 나타났다. 둘째, 가구의 형태 특성을 보면, 세장비는 평균 1:2의 비율이며, 동서방향의 장방형 가구가 높은 빈도를 나타났다. 1지구부터 3지구까지는 가구면적이 증가하는 추세이었으나 4지구는 다시 감소하여 현대적인 가구구획의 형태로 변화하는 양상을 띠었으며, 가구면적이 클수록 접도율이 일관성 있게 낮아지는 것을 알 수 있었다. 셋째 필지배열 특성을 보면, $4{\times}4$이상의 다열구조를 갖는 가구의 빈도가 1~3지구 까지 높았으며 4지구에서는 상당히 개선된 것으로 파악되었다. 특히 정방형에 가까운 가구는 접도율이 열악한 과다열 필지구획이 되어, 주거환경을 개선하는데 어려움이 있을 것으로 판단되었다. 토지구획정리사업에 의한 택지 개발은 가구구획이 상당히 정형화되어 있고, 그러한 주택지의 면적이 상당한 만큼 이러한 특성을 고려하여 좋은 주거지를 위한 개선방법을 찾는다면, 외곽개발 등의 난개발을 제어할 수 있는 대안이 될 수 있을 것으로 판단된다.

• 한국산업보건학회지
• /
• 제18권3호
• /
• pp.189-203
• /
• 2008

Cylindrical bag filter system with pulse jet cleaning has been the most common device to control particle laden exhaust gas from the various industrial processes. But, it has many shortcomings due to particle reattachment and frequent bag rupture. In recent years, rectangular type bag filter system has been developed to overcome the problems associated with the cylindrical system. However, not many studies about the rectangular system were not done, compared to the cylindrical system. In this study, the optimum pulse jet cleaning conditions were thus tested by the series of experiments. The factors tested in this study are pulse distance, pulse pressure, pulse duration, the number of holes for pulsing and bag materials. A single bag ($1,500mmL{\times}50mmW{\times}300mmH$) system and a multi-bags (3 bags in a row) were tested separately. The highest removal efficiency with a single bag system was found at the conditions with pulse distance of 10cm, pulse pressure of $3kg/cm^2$, pulse duration of 0.3s, pulse jet number of 6 and Polyester bag. With the multi-bags system, the best cleaning conditions were found at the bag interval of 20cm with the simultaneous pulsing and the bag interval of 15cm with the serial pulsing.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.207-210
• /
• 2005

This paper describes a design of several ship's emergency lighting system(SELS) that power factor is improved and power is controlled extensively, and techniques to control and monitor this system in remote distance by PC serial communication. The remote monitoring control system is composed of emergency power supply system (EPSS), half bridge(HB)inverter, fluorescent lamp(FL), microprocessor, multi communication interface. EPSS checks the voltage of the emergency backup battery in real time. In case that the voltage of 13[V] or less has been detected for 5[msec] or longer for 3 times in a row, charger circuit is connected for battery charging. Experimental works using proposed system confirm that speedy and stable power to be supplied when main power source cut-off, compared with conventional analog type, and input power up to 35.0[%] by adjusting of pulse frequency of the HB inverter.

• 산업경영시스템학회지
• /
• 제27권2호
• /
• pp.68-77
• /
• 2004

This paper considers the workforce assignment problem to minimize both the deviations of workloads assigned to workers and to maximize the total preference between each worker and each machine. Because of the high expense of technology education and the difficulties of firing employees, there is no part time workers in semiconductor industry. Therefore, multi-skilled workers are trained for performing various operations in several machines. The bicriteria workforce assignment problem in this paper is not easy to obtain the optimal solution considering the aisle structure and it is belong to NP-class. The proposed heuristic algorithms are developed based on the combination of spacefilling curve technique, simulated annealing technique and graph theory focusing on the multiple-row machine layout. Examples are presented for the proposed algorithms how to find a good solution.

• 대한전자공학회논문지SD
• /
• 제48권7호
• /
• pp.48-56
• /
• 2011

최근 NAND 플래시 메모리를 이용한 새로운 저장매체인 SSD(Solid State Disk)가 모바일 기기를 중심으로 HDD(Hard Disk Drive)를 대체하면서 가격대비 성능을 향상시키려는 연구가 다양한 접근 방식을 통해 진행 중이다. 병렬처리를 통한 NAND 플래시 대역폭 향상을 위해 채널수를 확장하면서 호스트(PC)와 NAND 플래시 간의 버퍼 캐시의 역할을 하는 DRAM 버퍼가 SSD 성능 개선의 bottleneck으로 작용하게 되었다. 이 문제를 해소하기 위해 본 논문에서는 DRAM Multi-bank를 활용한 스케줄링 기법을 통해 DRAM 버퍼 대역폭을 개선함으로써 저비용으로 SSD의 성능을 향상시키는 효과적인 방안을 제안한다. 호스트와 NAND 플래시 다중 채널이 동시에 DRAM 버퍼의 접근을 요청하는 경우, 이들의 목적지를 확인하여 DRAM 특성을 고려한 스케줄링 기법을 적용함으로써 bank 활성화 시간과 row latency에 대한 overhead를 감소시키고 결과적으로 DRAM 버퍼 대역폭 활용을 최적화할 수 있다. 제안한 기법을 적용하여 실험한 결과, 무시할만한 수준의 하드웨어 변경 및 증가만으로 기존의 SSD 시스템과 비교하여 SSD의 읽기 성능은 최대 47.4%, 쓰기 성능은 최대 47.7% 향상됨을 확인하였다.

• 한국통신학회논문지
• /
• 제11권4호
• /
• pp.280-286
• /
• 1986

행렬분해에 의하여 edge검출용 mask operator의 고속계산법을 제시하였다. 다방향성 mask operator의 각방향에 대한 계산결과는 mask원소와 화상간의 곱한 것을 합산한 것이다. 이것은 각 mask의 원소를 행으로 하는 행렬과 mask에 포함되는 화소를 원소로하는 벡터와의 곱과 마찬가지여서 1차원 신호변환으로도 취급할 수 있다. 본 논문에서는 Sobel 및 Prewitt operator의 경우에 대한 변환행렬을 구한 다음 분해하여 계산량을 산출하여 직접 계산할 때의 방법과 비교하였다. 이 결과 여분의 기억점을 사용치 않고서도 이 방법에 의한 계산량은 Soble 및 Prweitt operator의 경우에 각각 직접 계산량의 42.86%, 50%밖에 되지 않았다. 그리고 100x100화소의 화상인 경우에 301개의 여분의 기억점을 사용할때에 Sobel opreator는 직접 계산량의 35.93%로 줄어 들었다.