• Journal of Biosystems Engineering
• /
• v.21 no.1
• /
• pp.3-9
• /
• 1996

Sowing with an automatic seed metering device is increasing in popularity. Since 100% planting is not likely, a major problem is to find any place which contains no seeds between row spacings in the agricultural field. Automatic sowing technology, including the implementation of a microcomputer, appears to be an attractive alternative to the use of manual labor for accomplishing this task. Thus, the multi-purpose seeder attached to a cultivator was designed and constructed with an automatic seed metering device. This seeder proved to be a reliable system for sowing seeds in the agricultural field. Multi-purpose seeder for cultivator consists of an automatic seed metering device, a trench device, a covering device, and a press wheel

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.1
• /
• pp.36-48
• /
• 1997

In order to establish the ignition system for lean burn, the influence of the number of spark plug, spark times and spark intervals on discharge pattern of spark energy on ignitability and combustion characteristics were evaluated. It showed that, ignitability remarkably increased with the case of multiple spark ignition system than with the case of single spark and the lean limit extended fuel/air equivalence ratio by 0.1, the increase of magnitude and lasting time of capacity component and inductance component was multi spark discharge in a row.

• Journal of ILASS-Korea
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2009

This paper present the diesel fuel spray evolution and atomization performance in a multi-hole nozzle in terms of injection rate, spray evolutions, and mean diameter and velocity of droplets in a compression ignition engine. In order to study the effect of split injection on the diesel fuel spray and atomization characteristic in a multi-hole nozzle, the test nozzle that has two-row small orifice with 0.2 mm interval was used. The time based fuel injection rate characteristics was analyzed from the pressure variation generated in a measuring tube. The spray characteristics of a multi-hole nozzle were visualized and measured by spray visualization system and phase Doppler particle analyzer (PDPA) system. It was revealed that the total injected fuel quantities of split injection are smaller than those of single injection condition. In case of injection rate characteristics, the split injection is a little lower than single injection and the peak value of second injection rate is lower than single injection. The spray velocity of split injection is also lower because of short energizing duration and small injection mass. It can not observe the improvement of droplet atomization due to the split injection, however, it enhances the droplet distributions at the early stage of fuel injection.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1188-1198
• /
• 2015

In this paper, a multi-time programmable (MTP) cell based on a $0.18{\mu}m$ bipolar-CMOS-DMOS backbone process that can be written into by using dual pumping voltages - VPP (boosted voltage) and VNN (negative voltage) - is used to design MTP memories without high voltage devices. The used MTP cell consists of a control gate (CG) capacitor, a TG_SENSE transistor, and a select transistor. To reduce the MTP cell size, the tunnel gate (TG) oxide and sense transistor are merged into a single TG_SENSE transistor; only two p-wells are used - one for the TG_SENSE and sense transistors and the other for the CG capacitor; moreover, only one deep n-well is used for the 256-bit MTP cell array. In addition, a three-stage voltage level translator, a VNN charge pump, and a VNN precharge circuit are newly proposed to secure the reliability of 5 V devices. Also, a dual memory structure, which is separated into a designer memory area of $1row{\times}64columns$ and a user memory area of $3rows{\times}64columns$, is newly proposed in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.551-563
• /
• 2019

This study examined the characteristics of a district through the concept of a block system in the physical aspect of the four land readjustment project districts of Cheongju City in the 1970s. The results of this study are as follows. First, the local road system for accessing the main road network and blocks was well established compared with the current urban development standards. On the other hand, since the access roads to the individual lots in the block were not equipped properly, it was difficult to improve a house. Second, according to the characteristics of the block, the Aspect Ratio of blocks was 1: 2 on average and most of those directions was east-west. The area of block from the 1st to 3rd districts was increasing, but districts 4 were decreasing. This also was changed to the shape of a contemporary block system. The larger the size of the block area, the lower the Jeobdoyul. Third, in terms of the characteristics of the lot array, blocks with a multi-row system of $4{\times}4$ or more were lots up to the 1st to 3rd district, but 4th district was improved greatly. Because blocks close a square shape have become excessively poor with Jeobdoyul, it was judged that it is difficult to improve the residential environment. Moreover, as the type of the residential development by the land readjustment project is standardized considerably and this type of land area is extensive, it can be an alternative to control the urban sprawl of suburbs if it finds the way to improve this type of the residential area considering this characteristic.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.3
• /
• pp.189-203
• /
• 2008

Cylindrical bag filter system with pulse jet cleaning has been the most common device to control particle laden exhaust gas from the various industrial processes. But, it has many shortcomings due to particle reattachment and frequent bag rupture. In recent years, rectangular type bag filter system has been developed to overcome the problems associated with the cylindrical system. However, not many studies about the rectangular system were not done, compared to the cylindrical system. In this study, the optimum pulse jet cleaning conditions were thus tested by the series of experiments. The factors tested in this study are pulse distance, pulse pressure, pulse duration, the number of holes for pulsing and bag materials. A single bag ($1,500mmL{\times}50mmW{\times}300mmH$) system and a multi-bags (3 bags in a row) were tested separately. The highest removal efficiency with a single bag system was found at the conditions with pulse distance of 10cm, pulse pressure of $3kg/cm^2$, pulse duration of 0.3s, pulse jet number of 6 and Polyester bag. With the multi-bags system, the best cleaning conditions were found at the bag interval of 20cm with the simultaneous pulsing and the bag interval of 15cm with the serial pulsing.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.207-210
• /
• 2005

This paper describes a design of several ship's emergency lighting system(SELS) that power factor is improved and power is controlled extensively, and techniques to control and monitor this system in remote distance by PC serial communication. The remote monitoring control system is composed of emergency power supply system (EPSS), half bridge(HB)inverter, fluorescent lamp(FL), microprocessor, multi communication interface. EPSS checks the voltage of the emergency backup battery in real time. In case that the voltage of 13[V] or less has been detected for 5[msec] or longer for 3 times in a row, charger circuit is connected for battery charging. Experimental works using proposed system confirm that speedy and stable power to be supplied when main power source cut-off, compared with conventional analog type, and input power up to 35.0[%] by adjusting of pulse frequency of the HB inverter.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.2
• /
• pp.68-77
• /
• 2004

This paper considers the workforce assignment problem to minimize both the deviations of workloads assigned to workers and to maximize the total preference between each worker and each machine. Because of the high expense of technology education and the difficulties of firing employees, there is no part time workers in semiconductor industry. Therefore, multi-skilled workers are trained for performing various operations in several machines. The bicriteria workforce assignment problem in this paper is not easy to obtain the optimal solution considering the aisle structure and it is belong to NP-class. The proposed heuristic algorithms are developed based on the combination of spacefilling curve technique, simulated annealing technique and graph theory focusing on the multiple-row machine layout. Examples are presented for the proposed algorithms how to find a good solution.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.48-56
• /
• 2011

Recently, new storage device SSD(Solid State Disk) based on NAND flash memory is gradually replacing HDD(Hard Disk Drive) in mobile device and thus a variety of research efforts are going on to find the cost-effective ways of performance improvement. By increasing the NAND flash channels in order to enhance the bandwidth through parallel processing, DRAM buffer which acts as a buffer cache between host(PC) and NAND flash has become the bottleneck point. To resolve this problem, this paper proposes an efficient low-cost scheme to increase SSD performance by improving DRAM buffer bandwidth through scheduling techniques which utilize DRAM multi-banks. When both host and NAND flash multi-channels request access to DRAM buffer concurrently, the proposed technique checks their destination and then schedules appropriately considering properties of DRAMs. It can reduce overheads of bank active time and row latency significantly and thus optimizes DRAM buffer bandwidth utilization. The result reveals that the proposed technique improves the SSD performance by 47.4% in read and 47.7% in write operation respectively compared to conventional methods with negligible changes and increases in the hardware.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.4
• /
• pp.280-286
• /
• 1986

A newmethod of fast mask operators for edge detection is proposed, which is based on the matrix factorization. The output of each component in the multi-directional mask operator is obtained adding every image pixels in the mask area weighting by corresponding mask element. Therefore, it is same as the result of matrix-vector multiplication like one dimensional transform, i, e, , trasnform of an image vector surrounded by mask with a transform matrix consisted of all the elements of eack mask row by row. In this paper, for the Sobel and Prewitt operators, we find the transform matrices, add up the number of operations factoring these matrices and compare the performances of the proposed method and the standard method. As a result, the number of operations with the proposed method, for Sobel and prewitt operators, without any extra storage element, are reduced by 42.85% and 50% of the standard operations, respectively and in case of an image having 100x100 pixels, the proposed Sobel operator with 301 extra storage locations can be computed by 35.93% of the standard method.