• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1987년도 춘계학술발표회 논문집
• /
• pp.212-218
• /
• 1987

The error rate equations of digital modulatuon techniques(M-ary PSK MSK Multi-level QAM) have been derived in the environment of Qaussian noise and Jamming And the results are shown in the figures as parameters of carrier power to noise power ration(CNR) carrier power to Jamming power ration(CJR) Jamming power to carrier power ration(JCR) alteration figure of envelope of Jamming(M) As the results of analysis the system performance is more degreeded by Qau-ssian Famming than Tone Famming In case that envelope of Famming has m-distribution, the s/stem parformance is desreeded in the deep alteration of envelope

• 디지털산업정보학회논문지
• /
• 제10권2호
• /
• pp.61-73
• /
• 2014

An automatic vehicle location tracing system is to build GIS server and on transmission for providing service in various ways by collecting a GPS location information from each vehicle. It is to save GPS data from OBU built-in on the vehicle and transmit the GPS data using the RSU on the roadside and WAVE communication technology. The collected data from the RSU is transmitted to the GIS server and stored in DB(database) and based on the GPS data that was collected from the each vehicle the system is to provide user service to suit the applications so it is to provide various services between RSU and OBU. In this paper, by implementing a multi-session process between the RM and the RMA a variety of services between RSU and OBU are provided. In addition, the system is designed and implemented using GPS to provide a variety of services, for the services provided from each RMA by configuring them as an independent session so it enables a variety of services implemented from one of RSU. With the result of the comparative analysis on the multi-session processing and single-session processing it shows that the differenes of them are minor in repect of the data loss rate and the data transfer rate but various services can be provided.

• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.53-58
• /
• 2009

A real-time inspection system has been developed by combining CCD based image processing algorithm and a standard lighting equipment. The system was tested for defective fabrics showing nozzle contact scratch marks, which were one of the frequently occurring defects. Multi-resolution analysis(MRA) algorithm were used and evaluated according to both their processing time and detection rate. Standard value for defective inspection was the mean of the non-defect image feature. Similarity was decided via comparing standard value with sample image feature value. Totally, we achieved defective inspection accuracy above 95%.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.129-133
• /
• 2012

Coordinated multi-point transmission (CoMP) is a candidate technique for next generation cellular communications systems. One of the primary elements discussed in LTE-Advanced technology is CoMP, which can improve cell edge user data rate as well as spectral efficiency due to multiple input multiple output - orthogonal frequency division multiplex (MIMO-OFDM). We consider a system with multiple cells in which base stations coordinate with each other by sharing user channel state information (CSI), which mitigates inter cell interference (ICI), especially for users located at the cell edge. We introduce a new user scheduling method of ICI cancellation and the loss reduction of effective channel gain during the beamforming process, the proposed method improves the system sum rate, when compared to the conventional method by an average of 0.55bps/Hz in different number of total users per cell. It also outperforms the conventional method by approximately 0.38bps/Hz using different SNRs.

• 대한의용생체공학회:의공학회지
• /
• 제28권1호
• /
• pp.84-94
• /
• 2007

In order to collect information on local distribution of conductivity and permittivity underneath a scan probe, we developed a multi-frequency trans-admittance scanner (TAS). Applying a sinusoidal voltage with variable frequency on a chosen distal part of a human body, we measure exit currents from 320 grounded electrodes placed on a chosen surface of the subject. The electrodes are packaged inside a small and light scan probe. The system includes one voltage source and 17 digital ammeters. Front-end of each ammeter is a current-to-voltage converter with virtual grounding of a chosen electrode. The rest of the ammeter is a voltmeter performing digital phase-sensitive demodulation. Using resistor loads, we calibrate the system including the scan probe to compensate frequency-dependent variability of current measurements and also inter-channel variability among multiple. We found that SNR of each ammeter is about 85dB and the minimal measurable current is 5nA. Using saline phantoms with objects made from TX-151, we verified the performance of the lesion estimation algorithm. The error rate of the depth estimation was about 19.7%. For the size estimate, the error rate was about 15.3%. The results suggest improvement in lesion estimation algorithm based on multi-frequency trans-admittance data.

• 전자공학회논문지A
• /
• 제33A권10호
• /
• pp.152-159
• /
• 1996

We have designed and implemented an optoelectronic hardware of binary phase extraction joint transform correlator (BPEJTC) which provides higher peak-to-sidelobe ratio than many other versions of JTC that has been published so far and does not produce correlation peaks due to intra-class association, to construct a multi-target tracking system. The digital processing unit controlling the entire system plays the part of modifying and binarizing the joint transform power spectrum (JTPS) and the optical processing unit is mainly used to take fourier transform operations. Some experimental results conducted by designed system along with its architecture showed the processing rate of 6 frames per second, thereby the potential applicability of the proposed system to real-time multitarget tracking system is given.

• 한국음향학회지
• /
• 제20권1호
• /
• pp.56-61
• /
• 2001

본 논문은 비동기 방식의 IMT-2000 단말기용 ASIC (주문형 집적회로)에 포함되는 음성부호화기 알고리즘인 AMR(Adaptive Multi Rate) 보코더의 실시간 구현에 관한 것이다. 구현된 AMR 보코더는 12.2kbps에서 4.75kbps까지 8가지의 다중 비트율을 가지고 있으며, 인코더와 디코더 기능 외에 VAD (Voice Activity Detection) 블록과 SCR (Source Controlled Rate operation) 블록 등의 부가기능 및 시스템과의 접속 처리를 위한 프레임 구성 기능도 구현되어 있다. AMR 보코더를 구현하기 위하여 설계된 DSP (디지털 신호처리기)는 TeakLite 코어를 기반으로 하여 메모리 블록, 직렬접속 블록, CPU와의 접속을 위한 레지스터 파일 블록, 인터럽트 제어회로 등으로 구성된 16비트 고정 소수점형 DSP이다. 실시간 구현 방법에서는 메모리의 효율적인 관리를 통하여 계산량을 최적화하여 최대 동작 계산량을 약 24MIPS로 줄였으며, 구현된 AMR 보코더는 3GPP의 표준 시험 벡터를 모두 통과하여 검증을 완료하고, 실시간 보드 시험에서도 안정적으로 동작하는 것이 확인되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1355-1359
• /
• 2004

The two way subscriber transmission systems have tendency to spread its carrier frequency bandwidth or information bit rate and average bit error rate according to popularization of high speed information through the digital communication system, transmission medium and the Internet. This fact is an important incentive to realize new systems. These two way subscriber transmission systems usually use same cable or same carrier frequency bandwidth for up stream channel and down stream channel. In the systems, the disturbances of noise, crosstalk or fading affect the characteristics. Specifically, these disturbances cause the decrease of information bit rate and degradation of transmission quality. This paper proposes the improved method of their degradations using the particular feature of two way subscriber transmission systems and it makes clear proposed method is effective by theoretically and some numerical examples.

• 소음진동
• /
• 제8권4호
• /
• pp.683-689
• /
• 1998

A control algorithm for multi-stage dampers is developed based on the mode skyhook control concept, and implemented on the full vehicle system environment. The test vehicle system is equipped with the real time controller, four-stage variable dampers and sensors. The real time controller is developed using a digital signal processor(DSP), digital I/O, A/D and D/A converters. The dampers are driven by the electromagnetic actuators of less than 20 msec response time. The sensors include accelerometers, relative displacement transducers, and steering wheel rate sensors, etc. Through a series of tests in laboratory and proving ground, the performance of the semi-active suspension system is evaluated and it is shown that the vehicle dynamic characteristics is improved with the developed damping system. Futhermore, the parameter tuning methods to enhance vehicle dynamic performance are propsoed.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3822-3830
• /
• 2023

The large-area Compton camera (LACC), featuring significantly high detection sensitivity, was developed for high-speed localization of gamma-ray sources. Due to the high gamma-ray interaction event rate induced by the high sensitivity, however, the multiplexer-based data acquisition system (DAQ) rapidly saturated, leading to deteriorated energy and imaging resolution at event rates higher than 4.7 × 10³ s^-1. In the present study, a new simultaneous multi-channel DAQ was developed to improve the energy and imaging resolution of the LACC even under high event rate conditions (10⁴-10⁶ s^-1). The performance of the DAQ was evaluated with several point sources under different event rate conditions. The results indicated that the new DAQ offers significantly better performance than the existing DAQ over the entire energy and event rate ranges. Especially, the new DAQ showed high energy resolution under very high event rate conditions, i.e., 6.9% and 8.6% (for 662 keV) at 1.3 × 10⁵ and 1.2 × 10⁶ s^-1, respectively. Furthermore, the new DAQ successfully acquired Compton images under those event rates, i.e., imaging resolutions of 13.8° and 19.3° at 8.7 × 10⁴ and 10⁶ s^-1, which correspond to 1.8 and 73 μSv/hr or about 18 and 730 times the background level, respectively.