• 제목/요약/키워드: Multi-Pressure

검색결과 1,506건 처리시간 0.026초

원자로압력용기용 SA508 Gr.4N Ni-Mo-Cr계 저합금강 용접열영향부의 용접후열처리에 따른 미세조직과 기계적 특성 평가 (Evaluation of Microstructure and Mechanical Properties on Post-Weld Heat Treatment in the Heat Affected Zone of SA508 Gr.4N Ni-Mo-Cr Low Alloy Steel for Reactor Pressure Vessel)

  • 이윤선;김민철;이봉상;이창희
    • 대한금속재료학회지
    • /
    • 제47권3호
    • /
    • pp.139-146
    • /
    • 2009
  • The heat-affected zone (HAZ) of SA508 Gr.4N Ni-Mo-Cr low alloy steel, which has higher Ni and Cr contents than SA508 Gr.3 Mn-Mo-Ni low alloy steel, was investigated on the microstructure and mechanical properties. The HAZ was categorized into seven characteristic zones (CGCG, FGCG, ICCG, SCCG, FGFG, ICIC and SCSC-HAZ) according to the peak temperature from the thermal cycle experienced during multi-pass welding. Post Weld Heat Treatment (PWHT) was conducted in the temperature range of $550{\sim}610^{\circ}C$ for 30 hours to evaluate the effect of PWHT conditions on the microstructure and mechanical properties. Before PWHT, CGHAZ and FGFGHAZ showed high yield strength (YS) ranging from 1000 to 1250 MPa, while YS of SCSCHAZ decreased from 607 MPa (observed for base metal) to 501 MPa. The Charpy impact energies of sub-HAZs fell below 100J at $-29^{\circ}C$, except in the SCSCHAZ. By applying PWHT to sub-HAZ specimens, YS decreased as the PWHT temperature increased. In the case of CGHAZs and FGFGHAZ heat-treated at $610^{\circ}C$, YS dropped drastically to the range of 654~686 MPa. From the Charpy impact test, the upper-shelf energy (USE) increased to approximately 250J and Index temperature ($T_{68J}$) decreased below $-50^{\circ}C$. Specifically, in FGFG, ICIC and SCSC-HAZ, $T_{68J}$ was below -110, which was lower than the case of base metal.

Numerical investigation of the critical heat flux in a 5 × 5 rod bundle with multi-grid

  • Liu, Wei;Shang, Zemin;Yang, Shihao;Yang, Lixin;Tian, Zihao;Liu, Yu;Chen, Xi;Peng, Qian
    • Nuclear Engineering and Technology
    • /
    • 제54권5호
    • /
    • pp.1914-1928
    • /
    • 2022
  • To improve the heat transfer efficiency of the reactor fuel assembly, it is necessary to accurately calculate the two-phase flow boiling characteristics and the critical heat flux (CHF) in the fuel assembly. In this paper, a Eulerian two-fluid model combined with the extended wall boiling model was used to numerically simulate the 5 × 5 fuel rod bundle with spacer grids (four sets of mixing vane grids and four sets of simple support grids without mixing vanes). We calculated and analyzed 11 experimental conditions under different pressure, inlet temperature, and mass flux. After comparing the CHF and the location of departure from the nucleate boiling obtained by the numerical simulation with the experimental results, we confirmed the reliability of computational fluid dynamic analysis for the prediction of the CHF of the rod bundle and the boiling characteristics of the two-phase flow. Subsequently, we analyzed the influence of the spacer grid and mixing vanes on the void fraction, liquid temperature, and secondary flow distribution. The research in this article provides theoretical support for the design of fuel assemblies.

Consequence Analysis를 통한 도시가스 사고 피해 예측에 관한 연구 (A Study on the Prediction of City Gas Accident Damage by Consequence Analysis)

  • 안정식;김지혜;유지훈;김종경;강수비;조동현
    • 한국가스학회지
    • /
    • 제26권4호
    • /
    • pp.36-40
    • /
    • 2022
  • 최근 산업계에서 가장 큰 화두는 산업안전보건관리에 대한 영역이다. 도시가스는 인화성 가스로 화재 및 폭발의 위험이 크기 때문에 중대 산업 및 시민 재해를 예방하기 위해 많은 노력이 요구된다. 본 연구에서는 도시가스 안전관리의 일환으로 Consequence Analysis를 통해 도시가스 누출에 의한 폭발사고 발생 시 피해 범위 및 정도를 정량적으로 예측하고자 하였다. 그 결과 압력, 기상상황 등 다양한 누출조건에 따라 분석결과 값에 차이를 보였다. 본 연구를 통해 도시가스 안전관리업무 수행 시 도시가스 누출에 의한 사고의 시나리오를 마련하여 보다 효과적인 사고예방과 비상조치계획을 마련하는데 활용할 예정이다.

기계적 잠금장치의 적용여부에 따른 덕티드팬 클러치의 최적설계 및 분석 (Optimal Design and Analysis of Ducted Fan Clutch With or Without Mechanical Lock-up)

  • 김수철;김재승;문상곤;이근호
    • 항공우주시스템공학회지
    • /
    • 제17권1호
    • /
    • pp.10-15
    • /
    • 2023
  • 덕티드팬의 동력절환장치인 클러치의 마찰판 사양을 최적설계하고 그 결과를 분석하였다. 클러치는 기계적 잠금장치의 적용 여부에 따라 2가지 방식으로 구분하고 각자의 설계 조건 하에 최적화 되었다. 클러치를 최적 설계하기 위한 인자로 전달토크 용량, 마찰재 면압, 마찰면의 온도 및 드래그 토크 등을 계산하였고, 클러치 분리판의 부피와 드래그 토크의 최소화를 최적설계의 목적함수로 활용하였다. 기계적 잠금장치가 포함되지 않은 Type 1의 경우 덕티드팬의 피치각에 상관없이 클러치의 작동이 가능하지만, 기계적 잠금장치가 포함된 Type 2에 비해 마찰면의 외경이 약 2배정도 증가하였고, 부피는 약 5~7배, 드래그 토크는 약 7~12배 정도 증가하였다.

Development of the vapor film thickness correlation in porous corrosion deposits on the cladding in PWR

  • Yuan Shen;Zhengang Duan;Chuan Lu ;Li Ji ;Caishan Jiao ;Hongguo Hou ;Nan Chao;Meng Zhang;Yu Zhou;Yang Gao
    • Nuclear Engineering and Technology
    • /
    • 제54권12호
    • /
    • pp.4798-4808
    • /
    • 2022
  • The porous corrosion deposits (known as CRUD) adhered to the cladding have an important effect on the heat transfer from fuel rods to coolant in PWRs. The vapor film is the main constituent in the two-phase film boiling model. This paper presents a vapor film thickness correlation, associated with CRUD porosity, CRUD chimney density, CRUD particle size, CRUD thickness and heat flux. The dependences of the vapor film thickness on the various influential factors can be intuitively reflected from this vapor film thickness correlation. The temperature, pressure, and boric acid concentration distributions in CRUD can be well predicted using the two-phase film boiling model coupled with the vapor film thickness correlation. It suggests that the vapor thickness correlation can estimate the vapor film thickness more conveniently than the previously reported vapor thickness calculation methods.

TRAO KSP TIMES: Homogeneous, High-sensitivity, Multi-transition Spectral Maps toward the Orion A and Ophiuchus Cloud with a High-velocity Resolution.

  • Yun, Hyeong-Sik;Lee, Jeong-Eun;Choi, Yunhee;Evans, Neal J. II;Offner, Stella S.R.;Heyer, Mark H.;Lee, Yong-Hee;Baek, Giseon;Choi, Minho;Kang, Hyunwoo;Cho, Jungyeon;Lee, Seokho;Tatematsu, Ken'ichi;Gaches, Brandt A.L.;Yang, Yao-Lun;Chen, How-Huan;Lee, Youngung;Jung, Jae Hoon;Lee, Changhoon
    • 천문학회보
    • /
    • 제44권2호
    • /
    • pp.68.1-68.1
    • /
    • 2019
  • Turbulence plays a crucial role in controlling star formation as it produces density fluctuation as well as non-thermal pressure against gravity. Therefore, turbulence controls the mode and tempo of star formation. However, despite a plenty of previous studies, the properties of turbulence remain poorly understood. As part of the Taeduk Radio Astronomy Observatory (TRAO) Key Science Program (KSP), "mapping Turbulent properties In star-forming MolEcular clouds down to the Sonic scale (TIMES; PI: Jeong-Eun Lee)", we mapped the Orion A and the Ophiuchus clouds, in three sets of lines (13CO 1-0/C18O 1-0, HCN 1-0/HCO+ 1-0, and CS 2-1/N2H+ 1-0) with a high-velocity resolution (~0.1 km/s) using the TRAO 14-m telescope. The mean Trms for the observed maps are less than 0.25 K, and all these maps show uniform Trms values throughout the observed area. These homogeneous and high signal-to-noise ratio data provide the best chance to probe the nature of turbulence in two different star-forming clouds, the Orion A and Ophiuchus clouds. We present comparisons between the line intensities of different molecular tracers as well as the results of a Principal Component Analysis (PCA).

  • PDF

A case report of embryo transfer with air-transported fresh bovine embryo produced by multiple ovulation in Hanwoo

  • Sang-Yup Lee;Seong-Eun Heo;Won-Jae Lee
    • 한국동물생명공학회지
    • /
    • 제38권2호
    • /
    • pp.84-88
    • /
    • 2023
  • Because multiple ovulation embryo transfer (MOET) in cattle includes several benefits such as wide spreading of genetically superior offspring for long distance, this biotechnological method has been widely applied to Hanwoo. When the recipients are not stayed close after embryo recovery from donor, the embryos are moved to other farms via several vehicles (car, train, and airplane). However, air travel induces lesser oxygen level, increased vibration, lower air pressure, higher noise, and increased exposure of cosmic radiation to living things than ground level. It was still unknown that fresh embryos obtained from multiple ovulation of Hanwoo could maintain their fertility after being transported via air plane, the present case report introduced a clinical case of MOET in Hanwoo after shipping fresh embryos via air transportation. The donor was multi-ovulated via follicle-stimulating hormone series of injection, which was followed by a gonadotrophin-releasing hormone injection and artificial insemination twice. The embryos were recovered by the uterine flushing, packed in ministraws, transported to recipients for 6 h including 1 h air flight, and then transferred to the synchronized recipients. During pregnancy diagnosis of early gestation period, 5 of 7 recipients (71.4%) presented no heat signs and showed fetal sacs with fluid under transrectal ultrasonography. After normal gestation period, all recipients naturally delivered healthy calves (male n = 2 and female n = 3) without abortion, stillbirth, and premature birth. The present case report indicated that transportation of fresh embryos for MOET via domestic flight in Korea did not affect to their fertility.

금융(金融)의 전업(專業) 및 겸업화(兼業化) 이론(理論): 금융산업조직론(金融産業組織論)의 모색(摸索) (A Theory on the Scope of Financial Activity)

  • 좌승희
    • KDI Journal of Economic Policy
    • /
    • 제13권1호
    • /
    • pp.167-197
    • /
    • 1991
  • 최근의 세계금융산업(世界金融産業)은 이종금융업무간(異種金融業務間)의 통합(統合)(겸업(兼業))과 동시에 이와는 반대로 개별업무(個別業務)의 분할현상(分割現象)을 동시에 같이 경험하고 있는데, 본고(本稿)는 이러한 금융산업조직(金融産業組織)의 내생적(內生的) 재편현상(再編現象)을 체계적으로 설명할 수 있는 금융산업조직이론(金融産業組織理論)을 모색하는 데 그 목적이 있다. 기존의 전문화(專門化)와 겸업화이론(兼業化理論)을 통합한 잠정적 분석체계는 대체로 다음과 같은 시사점을 주고 있다. 첫째로, 독자적으로는 규모(規模)의 경제(經濟)가 강하고 여타 업무와는 범위(範圍)의 비경제하(非經濟下)에 있거나 범위(範圍)의 경제(經濟)가 약한 업무는 기존 업무세트에서 분할(分割) 전문화(專門化)될 것이다. 둘째로, 여타업무와는 범위(範圍)의 경제(經濟)가 강하면서, 독자적으로는 규모(規模)의 비경제하(非經濟下)에 있거나 혹은 규모(規模)의 경제(經濟)가 약한 업무는 겸업(兼業)될 것이다. 셋째로, 자유금융하(自由金融下)의 경쟁금융산업균형(競爭金融産業均衡)은 겸업기업(兼業企業)과 전업기업(專業企業)이 공존하는 혼합균형(混合均衡)이 될 것이다. 넷째로, 금융산업조직(金融産業組織)의 국가별 차이는 금융시장(金融市場) 및 수요규모(需要規模)의 차이에 의해 결정되며, 최근 진행되고 있는 금융(金融)의 세계화(世界化) 국제화(國際化)는 각국이 직면하게 될 금융시장(金融市場)의 규모를 균등화시킴으로써 장기적으로 각국 금융산업조직(金融産業組織)의 동질화(同質化)를 촉진시킬 것이다. 다섯째로, 금융제도(金融制度)에 대한 인위적 규제가 없다면 겸업주의(兼業主義) 은행제도(銀行制度)는 금융시장(金融市場)의 규모(規模)가 상대적으로 작은 경제에서, 전업주의(專業主義) 은행제도(銀行制度)는 금융시장의 규모가 상대적으로 큰 경제에서 주로 관찰되게 될 것이다. 본고(本稿)는 이러한 시사점들을 응용하여 주요국에 있어서의 전업주의(專業主義)와 겸업주의(兼業主義) 은행제도(銀行制度)의 역사적 변천과정을 각국 금융시장규모(金融市場規模)의 변천과정에 의해 설명하고, 현재 구조변화(構造變化)를 경험하고 있는 세계각국(世界各國) 금융산업조직(金融産業組織)은 장기적으로 구조가 동질화(同質化)되면서 혼합균형상태(混合均衡狀態)로 이행해 나갈 것으로 전망하고 있다.

  • PDF

대입 준비생의 입시스트레스가 정신건강에 미치는 영향 (The Influence of High School Students' Entrance Exam Stress on Their Mental Health)

  • 이희자;박영수
    • 한국학교ㆍ지역보건교육학회지
    • /
    • 제8권1호
    • /
    • pp.43-54
    • /
    • 2007
  • This study aimed at investigating the level of high school students' entrance exam stress and mental health first and also investigating if the entrance exam stress and mental health are related to gender, grade, character type, parenting style and economic status. This is expected to be used as a fundamental data for the development of health education program on high school students' stress and diagnosis of their mental health. To achieve those goals above, the questionnaire was used and the sample consisted of 600 students from general high schools in a large city, C and in a smaller city, A in Chungnam province through questionnaire and the conclusion, which was based on 582 proper questionnaires from the 600 questionnaires, through variable analysis, correlation analysis and multi-regression, is below. First, according to the information provided by respondents, the result showed the relationship between those background variables and the entrance exam stress and mental health level. As the students are more introverted and the parenting style is more authoritative, the entrance exam stress is higher and the mental health level is higher as the parenting style is more authoritative and the economic status is lower. In gender, the entrance exam stress level was high for male students in regard to parents pressure. For female students, it was due to the insufficient free time. In test performance, the good grade group showed high stress level when they don't have enough free time and the poor grade group showed high stress level when they have test tension and poor test performance. In character style, the introverted group showed high stress level in future uncertainty. In parenting style, the authoritative group showed significantly high level in all four sub-factors and there is no significant relationship with the stress level and economic statue. Female students reported higher mental health level than male students in somatization and depression. In academic achievement, the poor grade group showed high level in obsession, fear-anxiety and psychotism. In character style, the introverted group showed high level in sensitivity towards others and depression. And in parenting style, the authoritative group is higher in 9 sub-factors than the other two groups in the factor, economic status. The lower economic status group showed high mental health problem level in this order; in obsession, sensitivity towards others, depression, paranonia and psychotism. Second, the results revealed that there is a significant difference among the groups after comparing and analyzing the relationship between the mental health level according to the three groups, the first, second and third group divided by the degree of entrance exam stress. And the higher the entrance exam stress is, the higher the mental health problem level is. Verification showed that there was obvious difference among the groups. the entrance exam stress was positively correlated with the mental health level. The lack of free time, future uncertainty, test anxiety/poor test performance and parents pressure, these factors, in that order, were correlated with the mental health level. when the prediction variables which influenced on mental health are analyzed, test-anxiety/poor test performance was found to be related to mental health most. And after the factor, test-anxiety, future uncertainty and the lack of free time were listed(ranked), however results did not show any correlation with parents' pressure.

  • PDF

포항분지 영일층군 이암층의 수리지질학적 차폐능 평가: 수은 모세관 압입 시험의 결과 분석을 중심으로 (Evaluation of Hydrogeologic Seal Capacity of Mudstone in the Yeongil Group, Pohang Basin, Korea: Focusing on Mercury Intrusion Capillary Pressure Analysis)

  • 김선옥;왕수균;이민희
    • 자원환경지질
    • /
    • 제53권1호
    • /
    • pp.23-32
    • /
    • 2020
  • 이산화탄소 지중저장은 대규모로 포집된 이산화탄소를 지하 심부의 지질구조 내로 주입하여 대기중 방출을 제한하려는 지구온난화 대응기술이다. 본 연구에서는 국내 최초의 이산화탄소 지중주입 실증 연구 지역인 포항분지의 지하 800 m 이하에서 시추된 심부 코어 시료를 대상으로 FE-SEM, XRD, XRF, MICP 등 분석을 수행하여 덮개암층을 구성하는 이암의 광물학적 특성을 규명하고 이산화탄소 지중저장의 안정성과 신뢰성에 직접적인 영향을 미치는 수리지질학적 차폐능을 정량적으로 평가하고자 하였다. 광물학적 분석 결과 포항분지 영일층군 이암층은 주로 석영, K-장석, 사장석과 소량의 황철석, 방해석, 점토 광물로 이루어져 있는 것으로 나타났다. 수은 모세관 압입 시험 분석 결과, 시료는 대체적으로 균일한 입자 구성과 공극 분포를 가지고 있었으며, 산정된 공극률과 공기 투과도 사이에서 뚜렷한 상관관계는 나타나지 않았다. 산정된 공극진입압력과 돌파압력을 적용한 허용가능 CO2 기둥 높이는 이산화탄소 주입 대상층의 두께에 비해 현저하게 높은 것으로 나타났다. 이러한 결과는 포항분지 영일층군의 이암층이 이산화탄소 지중저장 주입실증 사업에서 시범 주입되는 이산화탄소의 누출을 억제하기에 충분한 차폐능을 보유하고 있음을 보여주었다. 그러나, 본 연구의 결과는 제한된 수량의 시료를 분석·평가한 것으로서 그에 상응하는 제한된 의미를 지닌다. 따라서, 실제적인 이산화탄소 지중저장 과정에서 수행되는 덮개암층의 차폐능 평가를 위해서는 지층 전체 규모에 대한 다수의 시료 채취와 그에 대한 다면적 분석과 평가가 이루어져야 할 것으로 판단된다.