• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.8-14
• /
• 2019

Most of the data envelopment analysis (DEA) models evaluate the relative efficiency of a decision making unit (DMU) based on the assumption that inputs in a specific period are consumed to produce the output in the same period of time. However, there may be some time lag between the consumption of input resources and the production of outputs. A few models to handle the concept of the time lag effect have been proposed. This paper suggests a new multi-period input DEA model considering the consistent time lag effects. Consistency of time lag effect means that the time delay for the same input factor or output factor are consistent throughout the periods. It is more realistic than the time lag effect for the same output or input factor can vary over the periods. The suggested model is an output-oriented model in order to adopt the consistent time lag effect. We analyze the results of the suggested model and the existing multi period input model with a sample data set from a long-term national research and development program in Korea. We show that the suggested model may have the better discrimination power than existing model while the ranking of DMUs is not different by two nonparametric tests.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.3
• /
• pp.57-65
• /
• 2022

DEA(data envelopment analysis) is a technique for evaluation of relative efficiency of decision making units (DMUs) that have multiple input and output. A DEA model measures the efficiency of a DMU by the relative position of the DMU's input and output in the production possibility set defined by the input and output of the DMUs being compared. In this paper, we proposed several DEA models measuring the multi-period efficiency of a DMU. First, we defined the input and output data that make a production possibility set as the spanning set. We proposed several spanning sets containing input and output of entire periods for measuring the multi-period efficiency of a DMU. We defined the production possibility sets with the proposed spanning sets and gave DEA models under the production possibility sets. Some models measure the efficiency score of each period of a DMU and others measure the integrated efficiency score of the DMU over the entire period. For the test, we applied the models to the sample data set from a long term university student training project. The results show that the suggested models may have the better discrimination power than CCR based results while the ranking of DMUs is not different.

• Economic Analysis
• /
• v.26 no.4
• /
• pp.65-97
• /
• 2020

The purpose of this paper is to analyze the effects of exports on Korea's employment and to decompose driving factors of change in Korea's employment embodied in exports (EEX). This study uses a multi-regional input-output (MRIO) and structural decomposition analysis (SDA) for empirical analysis, and uses a dataset of World Input-Output Tables (WIOTs) and Socio-Economic Accounts (SEAs) from the World Input-Output Database (WIOD). The main findings of the empirical results are summarized as follows. First, Korea's EEX continues to increase and Korea's share of EEX compared to total employment shows an upward trend. However, Korea's employment inducement coefficient of value-added exports showed a downward trend during the 2000-2014 period. Second, final demand from three countries (China, the United States, and the Rest of the World (RoW)) has affected a significant portion of Korea's EEX. Finally, from the results of the SDA, the effect of changes in final demand was the most important driving factor for the increase in Korea's EEX. Based on the results of this empirical analysis, this study discusses useful policy implications that could increase domestic employment in Korea.

• The Journal of Fisheries Business Administration
• /
• v.52 no.4
• /
• pp.45-63
• /
• 2021

The purpose of this study is to analyze the structure, status and economic ripple effects of the fisheries processing industry in Korea using interindustry analysis. Five input-output tables published over the past twenty years have been reclassified with a focus on the fisheries processing sector. Through these multi-period tables, we analyzed changes in the inducing effects in production, value added and employment as well as the backward-forward linkage effects. As a result of the analysis, it was found that the industrial scale of the fisheries processing industry is very small compared to other food manufacturing industries. The backward linkage effect of the fisheries processing industry was greater than that of other industries, but the forward linkage effect was rather low. This means that the fisheries processing industry can be greatly affected by industrial depression of the downstream industries such as fishery and aquaculture. Production and employment-inducing effects of the fisheries processing industry have shown a decreasing trend in recent years. This reflects the reality that intermediate inputs are gradually being replaced by imports from domestic production due to the expansion of market opening and the depletion of fishery resource. In the future, it is necessary to prepare a strategy to increase the value-added productivity of the fisheries processing sector and foster it as an export industry.

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.393-398
• /
• 2010

For multi-cell environments, coordinated random beamforming technique in multiuser MIMO(multiple-input multiple-output) broadcast channel is considered. In order to mitigate severe interference at receivers, the multi-cell environments might require complex transmitter and receiver design because the scheduler decision based on full channel state information (CSI) in one cell must be intertwined with decision made by other cells' CSI. With limited CSI, however, this paper considers a scheme of randomizing transmitters' beamforming but being coordinated with other cell transmitters. The transmitters in each cell share random beamforming patterns and schedule data transmission within coherent scheduling period. The corandomized beams allow the users to be selected with the highest SINRs even in multi-cell environments. We analyze the performance of the proposed scheme. And numerical results show that the scheme achieves better performance than the conventional random beamforming when applying to multi-cell environments.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2033-2036
• /
• 1997

In this paper, we proposed a novel current-fed DC-DC converter with multi-output. It has two winding reactor in series with the input source of the converter. By using the 2nd winding recycling the energy stored in the reactor to the input, the double-outputs DC-DC converter can be created, which makes it a good choice for a multi-output power supply with more outputs and has savings in cost and space. The steady state and dynamic characteristics of the converter are analyzed in detail by using the state space averaging method. It is found that the maximum value of $V_{o2}$ exists in the 2nd output and also during the MOSFET off period, the energy stored in the magnetizing inductance is reset through auxiliary winding $N_3$, so the duty cycle is restricted to 50%. Theoretical and experimental results were taken from the converter rated at switching frequency 50kHz. input voltage 50V. output voltage 5V. 12V and output power 65W. As a result, both results were well consistent. Therefore, it is varified the validity of the proposed converter in this paper.

• Journal of Technology Innovation
• /
• v.11 no.2
• /
• pp.151-173
• /
• 2003

This paper analyses the efficiency and productivity of R&D system across time (1991${\sim}$2000) and 16 OECD countries using multi-output and multi-input non-parametric frontier methods such as DEA (data envelopement analysis) and Malmquist productivity indexes. Malmquist productivity indexes are decomposed into two components measures, namely technical change and efficiency change. To calculate R&D efficiency and productivity, we used R&D stock and the number or researchers as R&D input proxies and the number of adjusted SCI papers and U.S. patent applications as R&D output proxies. Empirical result shows that Switzerland, Canada, U.S., Australia's R&D efficiencies are the highest and Korea's R&D productivity growth is the highest in the sample for the period. Technical efficiency growth was a more important source of productivity growth than technological innovation.

• Journal of Technology Innovation
• /
• v.6 no.2
• /
• pp.32-53
• /
• 1998

This paper analyzes the characteristics of embodied technological knowledge structure of Korean manufacturing in dynamic perspective. In doing that, the concept of the embodied knowledge network is introduced which is defined as a set of industries and their interactions(embodied knowledge flow) or linkages. The analysis of the inter-industrial embodied knowledge flows is conducted by using such methodologies as input-output technique, network analysis, indicator analysis and correlation analysis for a set of empirical data with reference period of 1983-1990. The main findings are as follow. First, as a whole, the structure of embodied knowledge flow can be classified into knowledge outflow sectors, inflow sectors and intermediary sectors. Second, outflow sectors exhibit a multi-central structure whereas inflow sectors form a dualistic structure. These idiosyncratic characteristics should be addressed in developing industrial policy.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.620-623
• /
• 2000

A very simple control approach using neural network for the robust position control of a Permanent Magnet Synchronous Motor(PMSM) is presented The linear quadratic controller plus feedforward neural network is employed to obtain the robust PMSM system approximately linearized using field-orientation method for an AC servo. The neural network is trained in on-line phases and this neural network is composed by a fedforward recall and error back-propagation training. Since the total number of nodes are only eight this system can be easily realized by the general microprocessor. During the normal operation the input-output response is sampled and the weighting value is trained multi-times by error back-propagation method at each sample period to accommodate the possible variations in the parameters or load torque. And the state space analysis is performed to obtain the state feedback gains systematically. IN addition the robustness is also obtained without affecting overall system response. This method is realized by a floating-point Digital Singal Processor DS1102 Board (TMS320C31) The basic DSP software is used to write C program which is compiled by using ANSI-C style function prototypes.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.5
• /
• pp.823-835
• /
• 2010

The research aimed to measure the efficiency of using multi stores in a foodservice company using by DEA (data envelopment analysis) which is a new management science technique. The study also attempted to identify relevant variables affecting DEA efficiency in order to suggest methods for improving efficiency. The data were collected from 148 contract foodservice operations, which were operated in similar fashion in October 2009. The DEA efficiency was calculated as an output-oriented BCC Model. Sales, and CSI (customer satisfaction index) were used as output variables whereas food cost, labor cost, and management expense were used as input variables to calculate the DEA efficiency. Operation process variables of the unit consisted of the were consist of ratio of regular employee, ratio of housekeeper, meal counts, meal price, food cost per meal, contract period, number of menu items, forecasting accuracy, order accuracy, inventory turnover, use of processed food, deviation of food cost, number of new menus, and number of events. According to the BCC score and profitability, units were classified into four groups: High efficiency-high profitability (HEHP), High efficiency-low profitability (HELP), Low efficiency-high profitability (LEHP), and Low efficiency-low profitability (LELP). The HEHP group contained 54 units, which mostly contracted management fee type and had a high meal price. The units were also very large and, served three meals. Twenty of the units were operated with high labor cost: most of these were factories and hospitals. The LEHP group contained 20 units, that were mainly office stores of large scale and medium price. Fifty-four LELP group had a low meal price. A high performance group must have high efficiency, profitability, and satisfaction. The BCC score was over 0.969, the meal price was over 4,116 won, the food cost was over 2,077 won, and meal counts per month were over 10,212 meals.