• The KIPS Transactions:PartA
• /
• v.15A no.5
• /
• pp.243-248
• /
• 2008

This paper proposes a low-power carry look-ahead adder using multi-threshold voltage CMOS. The designed adder is compared with conventional CMOS adder. The propagation delay time is reduced by using low-threshold voltage transistor in the critical path. Also, the power consumption is reduced by using high-threshold voltage transistor in the shortest path. The other logic block is implemented with normal-threshold transistor. Comparing with the conventional CMOS circuit, the proposed circuit is achieved to reduce the power consumption by 14.71% and the power-delay-product by 16.11%. This circuit is designed with Samsung $0.35{\mu}m$ CMOS process. The validity and effectiveness are verified through the HSPICE simulation.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.3
• /
• pp.129-133
• /
• 2004

As In DS/CDMA(direct sequence code division multiple access) system, the system capacity is limited by multiple access interference(MAI), and self-interference(SI) resulting from the multi-path propagation of the desired user signal. This paper, which the approximated analytic chip waveforms are nearly the same as the computer generated chip waveforms are shown. And then, the BER(Bit Error Rate) performances in CDMA system using the approximated analytic chip waveforms are shown.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.258-260
• /
• 2008

본 논문에서 다중경로 전파환경에서 전파특성을 연구하였다. 목표지점에서 전계의 세기는 직접파와 지면 반사파의 합으로 구성된다. 이 논문에서는 지면의 반사를 고려하여 목표물 근처 공간의 3차원 전계분포를 계산하는 프로그램을 개발하였다. 실제 목표물의 궤적에 따라 목표물의 수신기에서의 신호세기를 예측하는 3차원 모델을 개발 하였다.

• Journal of the Korea Convergence Society
• /
• v.2 no.2
• /
• pp.7-12
• /
• 2011

In this study, we investigate on location optimization algorithm of radio-navigation transmitter. The DOP for an each receiver is decided by the location of a transmitter. We provide various results that give an optimum DOP according to propagation characteristics. We use the DTED(Digital Terrain Elevation Data) to improve the accuracy.

• Journal of Communications and Networks
• /
• v.16 no.3
• /
• pp.305-310
• /
• 2014

Optimal position of access point (AP) is important for multi-gigabit wireless transmission in terahertz (THz) wireless local area network (WLAN)-type applications, where there exist the THz characteristic multiple clusters in channel propagation. By considering the multiple clusters in THz indoor communications, this paper investigates the optimal AP position when two APs are issued for increasing the system capacity. Numerical results reveal that the central position of each AP within each half service region, which offers the shortest cumulated path length for line-of-sight paths, is optimal to achieve the maximal system capacity.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.10 no.1
• /
• pp.84-90
• /
• 1990

By discriminating the wave propagation paths in cylindrical vessels, a technique for AE source location has been proposed. This method is based on the path difference between several propagating directions from a source to a sensor. One sensor can receive multiple waveforms sequentially including a direct arrival and several others propagated through the circumferential direction. An wave front normally propagates in all directions and as many waveforms can reach the sensor until the signal faded out by attenuation. Only the first four arrivals suffice the condition for calculating the source location. The proposed method was examined for an actual cylindrical vessel by the source location experiment using simulated AE sources. The test showed very promising results and the method can be utilized for a simple AE source location without multi-channel instruments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.2
• /
• pp.60-67
• /
• 2010

In the ubiquitous age, applications of wireless personal area network (WPAN) technology using LEDs are in progress. However, visible light communications (VLC) using the LEDs have weakness which deteriorate performance of communication because of multi-path fading that occurs propagation delay by interior walls or other things in indoor environments. In this paper, orthogonal frequency division multiplexing (OFDM) scheme is adapted to decrease multi-path fading and multi-path dispersion and to provide high speed data transmission. Besides, to reduce information losses caused by optical noise (incandescent lamps, fluorescent lamps, sunbeam etc.) also proposed channel coding using turbo codes. The encoding and decoding of the proposed system is described, and simulation results are analyzed. We can know that performance of proposed system is increased about 4 [dB] through the simulation results. Also, when the system take doppler effect, the system performance worsened.

• The Journal of Information Technology
• /
• v.6 no.4
• /
• pp.1-9
• /
• 2003

This paper is about power line communication(PLC) over the low power voltage grid. The main advantage with power line communication is the use of an existing infrastructure. The PLC channel can be modeled as having multi-path propagation with frequency-selective fading, typical power lines exhibit signal attenuation increasing with length and frequency. OFDM(Orthogonal Frequency Division Multiplexing) is a modulation technique where multiple low data rate carriers are combined by a transmitter to form a composite high data rate transmission. The performance in consideration of the multi-path(echoes) powerline scheme is analyzed and verified by computer simulation.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.11
• /
• pp.1-11
• /
• 1997

The transient current components of the dRAM are analyzed and the sensing current, data path operation current and DC leakage current are revealed to be the major curretn components. It is expected that the supply voltage of less than 1.5V with low VT MOS witll be used in multi-giga bit dRAM. A low voltage dual VT self-timed CMOS logic in which the subthreshold leakage current path is blocked by a large high-VT MOS is proposed. An active signal at each node of the nature speeds up the signal propagation and enables the synchronous DRAM to adopt a fast pipelining scheme. The sensing current can be reduced by adopting 8 bit prefetch scheme with 1.2V VDD. Although the total cycle time for the sequential 8 bit read is the same as that of the 3.3V conventional DRAM, the sensing current is loered to 0.7mA or less than 2.3% of the current of 3.3V conventional DRAM. 4 stage pipeline scheme is used to rduce the power consumption in the 4 giga bit DRAM data path of which length and RC delay amount to 3 cm and 23.3ns, respectively. A simple wave pipeline scheme is used in the data path where 4 sequential data pulses of 5 ns width are concurrently transferred. With the reduction of the supply voltage from 3.3V to 1.2V, the operation current is lowered from 22mA to 2.5mA while the operation speed is enhanced more than 4 times with 6 ns cycle time.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.476-483
• /
• 2016

Super Wi-Fi is a Wi-Fi-like service exploiting TV white space (WS) which is expected to achieve larger coverage than today's Wi-Fi thanks to its superior propagation characteristics. Super Wi-Fi has been materialized as an international standard, IEEE 802.11af, targeting indoor and outdoor applications, and is undergoing worldwide field tests. This paper demonstrates the true potential of indoor Super Wi-Fi, by experimentally comparing the signal propagation characteristics of Super Wi-Fi and Wi-Fi in the same indoor environment. Specifically, we measured the wall and floor attenuation factors and the path-loss distribution at 770MHz, 2.401 GHz, and 5.540 GHz, and predicted the downlink capacity of Wi-Fi and Super Wi-Fi. The experimental results have revealed that TVWS signals can penetrate up to two floors above and below, whereas Wi-Fi signals experience significant path loss even through a single floor. It has been also shown that Super Wi-Fi mitigates shaded regions of Wi-Fi by providing almost-homogeneous data rates within its coverage, performs comparable to Wi-Fi utilizing less bandwidth, and always achieves better spectral efficiency than Wi-Fi. The observed phenomena imply that Super Wi-Fi is suitable for indoor applications and has the potential of extending horizontal and vertical coverage of today's Wi-Fi.