• 제목/요약/키워드: Multi-Output Power Supply

검색결과 97건 처리시간 0.021초

Implementation of Multi-adaptive Filter for EOG Removal and Biofeedback Output Controller

  • Ahn, Bo-Sep;Kim, Pil-Un;Cho, Jin-Ho;Kim, Myoung-Nam
    • 한국멀티미디어학회논문지
    • /
    • 제7권12호
    • /
    • pp.1650-1656
    • /
    • 2004
  • In this paper, a multi-adaptive filter is proposed for removing EOG and the 60 Hz power supply noise from EEG measured in the frontal lobe and the feedback output control method is implemented for biofeedback. The multi-adaptive filter has been implemented on the TMS320C6711 DSP system and the feedback output control algorithm has been realized by calculating the ratio of alpha wave on the TMS320C31 DSP system with real time performance. Through the experiment using the implemented multi-adaptive filter and feedback output controller, we demonstrate that the proposed adaptive filter effectively removes EOG and the 60 Hz power supply noise from the measured EEG in the frontal lobe and the feedback algorithm controls the level of stimulation by the ratio of the alpha wave.

  • PDF

소형 대공 추적레이다용 전원공급기 개발 (Development of Power Supply for Small Anti-air Tracking Radar)

  • 김홍락;김윤진;이원영;우선걸;김광희
    • 한국인터넷방송통신학회논문지
    • /
    • 제22권4호
    • /
    • pp.119-125
    • /
    • 2022
  • 소형 대공 추적레이다용 전원공급기는 시스템이 잡음의 영향 없이 빠르고 안정적으로 전원을 공급받을 수 있도록 해야 한다. 이를 위하여 신뢰성 있는 전원변환을 위하여 DC-DC 변환기를 많이 적용한다. 또한 DC-DC 변환기의 스위칭 주파수 노이즈가 시스템의 탐지 추적 성능에 영향을 줄 수 있는 False Alarm 과 Ghost 를 유발하지 않도록 해야 하며, 추적 레이다가 동작중 실시간으로 전원을 모니터링 할 수 있는 점검 기능을 보유하고 있어야 한다. 본 연구에서는 소형 대공 추적 레이다에 적용하기 위하여 +28VDC 입력을 받아서 최대 출력 𐩒𐩒𐩒 W, 효율 80% 이상(@100%부하), 출력 전원 6개의 다중 출력 스위칭 전원공급기를 개발하였고 효율 80% 이상을 달성하기 위하여 전력이 큰 출력에 대해서는 DC-DC 변환기를 적용하였고 나머지 소전력 출력에 대해서는 출력 전류 및 노이즈를 고려하여 리니어 레귤레이터를 적용하여 설계 제작하여 시험 결과 100% 부하조건에서 85%의 우수한 효율 특성을 확인하였다.

대용량 GTO 구동회로용 Power Supply Unit 개발 (Development of Power Supply Unit for high power GTO driver)

  • 차재덕;양항준;홍순욱;이학성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 A
    • /
    • pp.609-612
    • /
    • 1996
  • This paper describes a design and implementation of the practical SMPS(Switched Mode Power Supply) with multi-output independent regulation scheme. The designed SMPS is applied to the PSU(Power Supply Unit) of high power GTO drivers for a inverter system. In order to accomplish precise voltage regulations for both turn-on and turn-off bias voltages of the GTO driver, the conventional forward type PWM converter scheme is adopted with the Post Regulator using a Saturable Reactor. Analytic design criteria and control schemes are described for practical applications. Finally, the precise regulation of multi-output voltages is proved by experimental results.

  • PDF

20W급 보조전원용 다출력 QR 플라이백 컨버터의 출력전압 안정화에 관한 연구 (A Study on Output Voltage Stabilization of 20W Class Multi-output QR Flyback Converter for Auxiliary Power)

  • 유정상;길용만;김현배;안태영
    • 반도체디스플레이기술학회지
    • /
    • 제20권3호
    • /
    • pp.157-160
    • /
    • 2021
  • In this paper, a 20W class multi-output QR flyback converter for auxiliary power supply was designed to stabilize 4 output voltages, and the efficiency and load characteristics were compared and analyzed. It was checked if each output affects other output characteristics through experiment. As a result, the experimental circuit reached a high efficiency of 82.5% or more at a load power of over 20W, and the maximum power loss was 2.6W. Consequently, it was confirmed that all of 4 output voltages of the multi-output QR flyback converter constructed in this paper were stabilized within 0.5% in full-load range, and each output was independently controlled in an electrically isolated state.

에너지회생스너버를 적용한 하이브리드 3레벨 DC/DC 컨버터 (Hybrid Three-Level DC/DC Converter using an Energy Recovery Snubber)

  • 허예창;주종성;말론;김은수;강철하;이승민
    • 전력전자학회논문지
    • /
    • 제22권1호
    • /
    • pp.36-43
    • /
    • 2017
  • This paper describes a hybrid multi-output three-level DC/DC converter suitable for a wide, high-input voltage range of an auxiliary power supply for a high-power photovoltaic generating system. In a high-power photovoltaic generating system, the solar panel output voltage depends on solar radiation quantity and varies from 450Vdc to 1100Vdc. The proposed hybrid multi-output three-level DC/DC converter, which is an auxiliary power supply, would be used as power source for control printed circuit boards and relay and cooling fans in a high-power photovoltaic generating system. The proposed multi-output ($24V_{DC}/30A$, $230V_{DC}/5A$) hybrid three-level boost converter, which uses an energy recovery snubber, is controlled by variable-frequency and phase-shifted modulations and can achieve zero-voltage switching with all operating conditions of input voltage and load range. Experimental results of a 2kW prototype are evaluated and implemented to verify the performance of the proposed converter.

소형 밀리미터파(Ka 밴드) 레이다용 전원공급기 개발 (Developed power supply for small Millimeterwave(Ka band) radar)

  • 김홍락;우선걸;이영수;김윤진
    • 한국인터넷방송통신학회논문지
    • /
    • 제19권1호
    • /
    • pp.197-202
    • /
    • 2019
  • 소형 밀리미터파 추적 레이다용 전원공급기는 리플노이즈가 최소인 안정적인 전원을 공급해야 하며 DC-DC 변환기의 스위칭 주파수 노이즈가 False Alarm 과 Ghost 를 유발하지 않고 운영중 모니터링을 통한 실시간 자체점검 기능을 보유하고 있어야 한다. 본 연구에서는 소형 밀리미터파 추적 레이다에 적용하기 위하여 +28VDC 입력을 받아서 최대 출력 ${\bigcirc}{\bigcirc}{\bigcirc}W$, 효율 80% 이상(@100%부하), 출력 전원 10개의 다중 출력 스위칭 전원공급기를 개발하였고 효율 80% 이상을 달성하기 위하여 전력이 큰 출력에 대해서는 DC-DC 변환기를 적용하였고 나머지 소전력 출력에 대해서는 다중 출력 플라이백 방식을 적용하여 설계 제작하여 시험 결과 100% 부하조건에서 85%의 우수한 효율 특성을 확인하였다.

A Novel Control Technique for a Multi-Output Switched-Resonant Converter

  • Sundararaman, K.;Gopalakrishnan, M.
    • Journal of Power Electronics
    • /
    • 제13권6호
    • /
    • pp.928-938
    • /
    • 2013
  • This paper proposes a novel control method for a multi-output switched-resonant converter. Output voltage can be regulated against variations in the supply voltage and load by controlling the voltage of the resonant capacitor (pulse amplitude control). Precise control is possible when pulse amplitude control is combined with pulse number control. The converter is analyzed, and design considerations are explained by using examples. Control implementation is described and load regulation and ripples are analyzed by simulation and hardware results. The topology is modified to obtain an additional negative output without any additional hardware other than a diode. The analysis of such a triple output converter with two positive outputs and one negative output is conducted and confirmed. The topology and control scheme are scalable to any number of outputs.

자기부상열차용 DC-DC 전원장치에 관한 연구 (A Study on DC-DC Power Supply for Magnetically Levitated Vehicle)

  • 정춘병;전기영;이훈구;한경희
    • 조명전기설비학회논문지
    • /
    • 제18권6호
    • /
    • pp.128-135
    • /
    • 2004
  • 본 논문은 자기부상열차용 전원의 문제점을 개선시키기 위해서 다중루프 제어기를 제시하였다. 제시된 제어기는 3개의 부분으로 구성되어 있다. 첫 번째는 입력전압의 변동에 대하여 보상할 수 있는 Feed Forward제어기이며 두 번째는 리액터 전류와 출력 전류의 차를 보상하며, 세 번째는 비례적분제어기를 사용하여 출력전압에 포함된 리플을 감소시키므로써, 안정화된 시스템을 구현하였다. 이 시스템의 특성을 확인하기 위해서 Matlab Simulink와 고성능 DSP소자인 TMS320F240을 이용하여 비교 분석하였다.

다출력 플라이백 컨버터를 위한 자동 동기 스위치 포스트 레귤레이터 (An Automatic Synchronous Switch Post Regulator for Multi-Output Flyback Converter)

  • 김호진;이해교;양승욱;목형수;최규하;이성주
    • 전력전자학회논문지
    • /
    • 제11권4호
    • /
    • pp.321-327
    • /
    • 2006
  • 본 논문은 다출력 전원장치에 적용되는 플라이백 컨버터를 위한 자동 동기 스위치 포스트 레굴레이터를 제안한다. 제안된 회로는 기존의 스위치 포스트 레굴레이터의 단점인 구동회로 구현 및 주 출력과 보조 출력의 동기의 어려움으로 인한 복잡한 회로구성이 새로운 자동동기 스위치로 간단하게 구성된다. 제안된 회로를 적용함으로서 각 출력의 전압가변과 정밀한 레굴레이션이 요구되는 다중출력 전원장치를 간단한 구성과 저렴한 가격으로 제작할 수 있으며, 이론적 해석 및 시뮬레이션 그리고 실험을 통하여 제안 회로의 타당성을 입증하였다.

A Novel Ripple-Reduced DC-DC Converter

  • Tao, Yu;Park, Sung-Jun
    • Journal of Power Electronics
    • /
    • 제9권3호
    • /
    • pp.396-402
    • /
    • 2009
  • A DC/DC converter generally needs to work under high switching frequency when used as an adjustable power supply to reduce the size of magnetic elements such as inductors, transformers and capacitors, but with the rising of the switch frequency, the switch losses will increase and the efficiency will reduce. Recently, to solve these problems, research is actively being done on a soft switching method that can be applied under high frequency and on a PWM converter that can be applied under low frequency such as a multi-level topology. In this paper a novel DC-DC conversion method for reducing the ripple of output voltage is proposed. In the proposed converter, buck converters are connected in series to generate the output voltage. By using this method, the ripple of output voltage can be reduced compared to a conventional buck converter. Particularly when output voltage is low, the number of acting switching elements is less and the result of ripple reduction is more obvious. It is expected that the converter proposed in this paper could be very useful in the case of wide-range output voltage.