• Wind and Structures
• /
• 제37권6호
• /
• pp.445-460
• /
• 2023

Accurate estimation of modal parameters (i.e., natural frequency, damping ratio) of tall buildings is of great importance to their structural design, structural health monitoring, vibration control, and state assessment. Based on the combination of variational mode decomposition, smoothed discrete energy separation algorithm-1, and Half-cycle energy operator (VMD-SH), this paper presents a method for structural modal parameter estimation. The variational mode decomposition is proved to be effective and reliable for decomposing the mixed-signal with low frequencies and damping ratios, and the validity of both smoothed discrete energy separation algorithm-1 and Half-cycle energy operator in the modal identification of a single modal system is verified. By incorporating these techniques, the VMD-SH method is able to accurately identify and extract the various modes present in a signal, providing improved insights into its underlying structure and behavior. Subsequently, a numerical study of a four-story frame structure is conducted using the Newmark-β method, and it is found that the relative errors of natural frequency and damping ratio estimated by the presented method are much smaller than those by traditional methods, validating the effectiveness and accuracy of the combined method for the modal identification of the multi-modal system. Furthermore, the presented method is employed to estimate modal parameters of a full-scale tall building utilizing acceleration responses. The identified results verify the applicability and accuracy of the presented VMD-SH method in field measurements. The study demonstrates the effectiveness and robustness of the proposed VMD-SH method in accurately estimating modal parameters of tall buildings from acceleration response data.

• 한국해양공학회지
• /
• 제22권1호
• /
• pp.70-74
• /
• 2008

It is important to reduce the vibration and noise of submarines and ships. For the purpose of noise reduction, various researches are actively being conducted on the employment of complex structures. However, in the case of numerical analysis for complex structures with damping materials, substantial errors can be generated by the absence of an exact damping model. Thus experimental model analysis is necessary for the verification of a numerical analysis for complex structures. In this research, vibration experiments are conducted in order to ascertain the vibration properties of cantilever beam attached damping materials. First, an initial value is obtained by using a direct linear method. Next, based on this initial value, the exact modal parameters of the cantilever beam are obtained by using the Newton-Raphson method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.863-864
• /
• 2012

• Steel and Composite Structures
• /
• 제21권2호
• /
• pp.249-266
• /
• 2016

The interest of this article lies in the proposition of using bionic method to develop a new sound absorber and analyze the efficient of this absorber in a ski cabin. Inspired by the coupling absorption structure of the skin and feather of a typical silent flying bird - owl, a bionic coupling multi-layer structure model is developed, which is composed of a micro-silt plate, porous fibrous material and a flexible micro-perforated membrane backed with airspace. The finite element simulation method with ACTRAN is applied to calculate the acoustic performance of the multi-layer absorber, the vibration modal of the ski cabin and the sound pressure level (SPL) near the skier's ears before and after pasting the absorber at the flour carpet and seats in the cabin. As expected, the SPL near the ears was significantly reduced after adding sound-absorbing material. Among them, the model 2 and model 5 showed the best sound absorption efficiency and the SPL almost reduced 5 dB. Moreover, it was most effctive for the SPL reduction with full admittance configuration at both the carpet and the seats, and the carpet contribution seems to be predominant.

• Composites Research
• /
• 제14권1호
• /
• pp.39-46
• /
• 2001

본 논문에서는 신경망 제어기를 이용하여 복합재 보의 적응 다중 모드 진동 제어에 관한 실험적 연구를 수행하였다. 신경망 제어기는 계산량이 많기 때문에 실시간 적용에 어려움이 따른다. 본 논문에서는 진동 신호를 모드별로 분리하기 위한 적응 노치 필터를 제안하였다. 연결 강도의 개수가 적어서 계산량이 적은 두 개의 신경망 제어기를 이용하여 각 모드의 제어력을 계산하였다. 끝단 질량의 위치의 차이로 인해 고유 진동수가 다른 두 시편 A, B에 대하여 적응 노치 필터와 신경망 제어기를 이용한 적응 진동 제어를 수행한 결과, 두 경우 모두 효과적으로 진동 제어가 이루어졌다. 이러한 결과로 시스템 파라미터의 변환에 대한 신경망 제어기의 적응 진동 제어 성능을 확인할 수 있다.

• 대한교통학회지
• /
• 제23권7호
• /
• pp.111-123
• /
• 2005

본 논문에서는 교통시설투자 의사결정을 위한 네트워크 설계 모형이 제시되었다. 모형은 사용자 평형의 통행패턴을 예측할 수 있으면서, 링크의 설치 여부를 정하는 이산형 의사결정변수를 갖는 Bi-Level Programming 형태로 구축되었다. 제시된 모형의 장점으로는 사회적 비용을 감안한 투자 결정을 묘사했다는 점과 도로와 철도로 이루어진 네트워크에서의 평형 통행패턴을 예측할 수 있다는 점이다. 정수형 변수의 Bit 구조를 이용한 효율적인 해법 알고리즘이 개발되었다. 예제를 통하여 모형과 알고리즘의 유효성을 검증하였는데, 예제 결과에서 투자의 한계효과 감소현상을 발견하였다.

• Structural Engineering and Mechanics
• /
• 제51권3호
• /
• pp.433-446
• /
• 2014

The purpose of the research presented in this paper was to investigate the effectiveness of several conventional, multi-modal and adaptive pushover procedures. In particular, an extensive numerical study was performed considering eight RC frames characterized by a variable number of storeys and different properties in terms of regularity in elevation. The results of pushover analyses were compared with those of nonlinear dynamic analyses, which were carried out considering different earthquake records and increasing values of earthquake intensity. The study was performed with reference to base shear-top displacement curves and to different storey response parameters. The obtained results allowed a direct comparison between the pushover procedures, which in general were able to give a fairly good estimate of seismic demand with a tendency to better results for lower frames. The advanced procedures, in particular the multi-modal pushover, provided an improvement of the results, more evident for the irregular frames.

• Nuclear Engineering and Technology
• /
• 제22권4호
• /
• pp.371-379
• /
• 1990

제논의 공간적인 진동은 원자로의 운전에 지장을 초래할 수 있다. 본 연구에서는 가압경수로에서의 제논에 의한 불안정성을 분석하기 위하여, 보다 일반적이고 다중입력/다중출력 계통에 적합한 일반화된 Nyquist조건을 사용하는 진동수위주의 기술을 적용하였다. 또한 모드전개 방법에 의하여 선형화된 중성자속을 구했다. 이 모형으로 출력 준위, 제어봉 위치, 그리고 평균 노심 연소도둥의 노물리 변수의 변화에 따른 영광 1호기의 제논에 대한 축방향 안정성을 조사하였다. 결과로는, 출력 준위의 증가나 제어봉 삽입의 증가는 안정성을 저해하는 효과를 가져오고, 연소도가 증가할 수록 불안정한 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제82권5호
• /
• pp.667-678
• /
• 2022

Moment-resisting frames (MRFs) are among the most conventional steel structures for mid-rise buildings in many earthquake-prone cities. Here, a simplified performance-based methodology is proposed for the seismic collapse capacity assessment of these buildings. This method employs a novel multi-mode pushover analysis to determine the engineering demand parameters (EDPs) of the regular steel MRFs up to the collapse prevention (CP) performance level. The modal combination coefficients used in the proposed pushover analysis, are obtained from two metaheuristic optimization algorithms and a fitting procedure. The design variables for the optimization process are the inter-story drift ratio profiles resulting from the multi-mode pushover analyses, and the objective values are the outcomes of the incremental dynamic analysis (IDA). Here, the collapse capacity of the structures is assessed in three to five steps, using a modified IDA procedure. A series of regular mid-rise steel MRFs are selected and analyzed to calculate the modal combination coefficients and to validate the proposed approach. The new methodology is verified against the current existing approaches. This comparison shows that the suggested method more accurately evaluates the EDPs and the collapse capacity of the regular MRFs in a robust and easy to implement way.

• Composites Research
• /
• 제24권2호
• /
• pp.14-21
• /
• 2011

본 논문에서는 항공기에 장착되는 다축 구동 광학계에 대한 동역학 모델링을 하고, 다물체 동역학 해석프로그램을 사용하여 다축 구동 광학계의 모드해석, 사인파 해석 및 랜덤 진통해석을 하였다. 카메라 모듈의 물성으로는 Al6061-T6와 두 가지 형태의 강화 복합재 물성을 적용하였으며, x, y, z 축의 가진에 따른 각 축의 응답을 구하여 서로 비교하였다. 해석 결과는 카메라 모듈의 경량화를 위해 사용될 수 있을 것으로 사료된다.