• 한국시뮬레이션학회논문지
• /
• 제22권4호
• /
• pp.67-82
• /
• 2013

본 논문은 공학급 국방 모델의 시뮬레이션 성능 향상을 위해 다중 충실도(Multi-fidelity) 모델링 시뮬레이션(M&S: Modeling and Simulation) 기법을 제안한다. 제안하는 기법은 다양한 충실도를 지닌 모델을 활용하여 고 충실도 모델의 시뮬레이션과 비교하여 유사한 수준의 시스템 분석 결과를 얻음과 동시에 시뮬레이션 성능 측면에서 이득을 가져오는 방안이다. 다중 충실도 원리를 적용하기 위해 본 논문은 충실도를 모델 동작과 실행 측면으로 세분화하고, 충실도 변환 지점을 FCP (Fidelity Change Point)로 정의한다. 이러한 원리를 바탕으로 본 논문은 다음의 세 가지 쟁점을 다룬다. 먼저, 모델 동작과 실행 측면의 충실도 변환을 위한 모델 구조와 제안하는 모델에 대한 수학적 형식론, 마지막으로 모델 실행을 위한 시뮬레이션 알고리즘을 제안한다. 사례 연구로 어뢰의 표적 추적 시나리오에 대한 기초 실험을 수행하였고, 실험 결과 제안하는 기법을 사용한 경우 기존의 시뮬레이션과 비교하여 최대 4.24배의 시뮬레이션 성능 향상을 보임을 확인하였다. 본 논문에서 제안하는 기법은 M&S 기반의 시스템 분석을 하는 다양한 분야에서 활용될 수 있음을 기대한다.

• ETRI Journal
• /
• 제43권3호
• /
• pp.524-537
• /
• 2021

High-performance Linpack (HPL) is among the most popular benchmarks for evaluating the capabilities of computing systems and has been used as a standard to compare the performance of computing systems since the early 1980s. In the initial system-design stage, it is critical to estimate the capabilities of a system quickly and accurately. However, the original HPL mathematical model based on a single core and single communication layer yields varying accuracy for modern processors and accelerators comprising large numbers of cores. To reduce the performance-estimation gap between the HPL model and an actual system, we propose a mathematical model for multi-communication layered HPL. The effectiveness of the proposed model is evaluated by applying it to a GPU cluster and well-known systems. The results reveal performance differences of 1.1% on a single GPU. The GPU cluster and well-known large system show 5.5% and 4.1% differences on average, respectively. Compared to the original HPL model, the proposed multi-communication layered HPL model provides performance estimates within a few seconds and a smaller error range from the processor/accelerator level to the large system level.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.574-582
• /
• 1999

This paper discusses the multi-level optimization method in dynamic optimization problems through stiffened plate of ship structures. In structural optimization the computational cost increases rapidly as the number of design variables increases. And we need a great amount of cal-culation and time on problems of modified dynamic characteristics of large and complicated struc-tures. In this paper the multi-level optimization is proposed which decreases computational time and cost. the dynamic optimum designs of stiffened plate that control the natural frequency and minimize weight subjected to constraints condition are derived. The way to apply the multi-level optimization methods in this study follow: In the first step the dynamic characteristics is controlled for the two-dimensional model of stiffened plate by sensitivity analysis and quasi-least squares methods. In the second step the cross-section of the stiffener is decided so that the weight is minimized under needed constraints by the steepest descent or ascent method. In the third the three-dimensional model is made based on the results of the first step and the second step confirmation and finer tuning of the objective function are carried out. It is shown that the results are effective in the optimum modification for dynamic characteristics of the stiffened plate.

• 이베로아메리카
• /
• 제12권1호
• /
• pp.407-439
• /
• 2010

Growth of researches addressing cross-culture in international business is exponential. This article reviews the extant researches around the national culture and describes the various conceptualization of culture through discussion of some of popular models of national culture. This article presented some of the most important issues in international business surrounding globalization, especially convergence and divergence of cultures and cultural changes. Global rapid changes in international business environment request the reconsideration of the assumption of cultural stability and the simple view of culture, which tends to examine the static influence of a few cultural factors in isolation form other cultural factors and contextual elements. This paper identifies a valid cultural grouping and proposes the following typology of the possible methodologies in international business; Ethnological description, Use of proxies, Direct values inference, and Indirect values inference. Rather than selecting a single methodology, it appears to be more appropriate to use multi-method in the cross-cultural international business research. It has been shown that cultural change is intertwined with socioeconomic-institutional variables, and that these variables may also add to determine culture contemporarily. This paper also explained the dynamics of culture as multi-level, multi-layer constructs. According to this model, we may understand how the dynamic nature of culture conveys the top-down-bottom-up processes where one cultural level affects changes in other level of culture.

• 한국정보과학회 언어공학연구회:학술대회논문집(한글 및 한국어 정보처리)
• /
• 한국정보과학회언어공학연구회 1994년도 제6회 한글 및 한국어정보처리 학술대회
• /
• pp.140-145
• /
• 1994

형태소 분석은 단위 형태소를 분리한 후에 변형이 일어난 형태소의 원형을 복원하고, 분리된 단위 형태소들로부터 단어 형성 규칙에 맞는 연속된 형태소들을 구하는 과정이다. 이러한 일련의 분석 과정은 독립적인 특성이 강하면서 각 모듈이 서로 밀접하게 연관되어 있으므로 Two-level 모델에서는 형태론적 변형뿐만 아니라 형태소 분리 문제를 통합 규칙으로 처리하고 있다. 그러나 한국어에 Two-level 모델을 적응해 보면 형태소 분리와 형태론적 변형이 복합되어 있어서 교착어의 특성과 관계되는 단어 유형을 분석할 때 비효율적인 요소가 발견된다. 따라서 본 논문에서는 교착어인 한국어의 형태소 분석시에 발생하는 문제점들을 해결하는데 적합한 방법론으로 다층 형태론(multi-level morphology)과 다단계 모델(multi-level model)을 제안한다.

• Environmental Engineering Research
• /
• 제14권1호
• /
• pp.53-60
• /
• 2009

The main objective was to develop and assess a dynamic fate and transport model for lead in air, soil, sediment, water and vegetation. Daejeon was chosen as the study area for its relatively high contamination and emission levels. The model was assessed by comparing model predictions with measured concentrations in multi-media and atmospheric deposition flux. Given a lead concentration in air, the model could predict the concentrations in water and soil within a factor of five. Sensitivity analysis indicated that effective compartment volumes, rain intensity, scavenging ratio, run off, and foliar uptake were critical to accurate model prediction. Important implications include that restriction of air emission may be necessary in the future to protect the soil quality objective as the contamination level in soil is predicted to steadily increase at the present emission level and that direct discharge of lead into the water body was insignificant as compared to atmospheric deposition fluxes. The results strongly indicated that atmospheric emission governs the quality of the whole environment. Use of the model developed in this study would provide quantitative and integrated understanding of the cross-media characteristics and assessment of the relationships of the contamination levels among the multi-media environment.

• 경영과학
• /
• 제28권1호
• /
• pp.117-127
• /
• 2011

In the Multi-Echelon maintenance environment, METRIC(Multi-Echelon Technique for Repairable Item Control) has been used in several different inventory level selection models, such as MOD-METRIC, Vari-METRIC, and Dyna- ETRIC. While this model's logic is easy to be implemented, a critical assumption of infinite maintenance capacity would deteriorate actual values, especially Expected Back Order(EBO)s for each item. To improve the accuracy of EBO, we develop two models using simulation and queueing theory that calculates EBO considering finite capacity. The result of our numerical example shows that the expected backorder from our model is much closer to the true value than the one from Vari-METRIC. The queueing model is preferable to the simulation model regarding the computational time.

• 국토계획
• /
• 제54권5호
• /
• pp.129-138
• /
• 2019

This study aims to empirically examine the relationship between building energy consumption and building and local factors in Seoul. Building energy issue is an important topic for low carbon and eco-friendly city development. Building physical, socio-economic and environmental factors effect to increasing or decreasing energy consumption. However, there are different characteristic in each area, and this kind of variable has a hierarchical structure. The multi-level model was used to consider the hierarchical structure of the variables. In this study, a multi-level model was applied to confirm the difference between areas. Spatial area is Seoul, Korea and the temporal scope is August, summer season. As the result, in Model 1 (Null Model), ICC is 0.817. This shows that the energy consumption differs by 8.174% due to factors at the Dong level. Model 2 (Random Intercept Model) suggests that building's physical factors and Average age, Household size and Land price in Dong level have significant effects on Building energy consumption. In Model 3 (Random Coefficient Model), random effect variables have intercepts and slopes to vary across groups. This study provides a perspective for policy makers that the building energy reduction policies to be applied for buildings should be differently applied on area. Furthermore, not only physical factors but also socio-economic and environmental factors are important when making energy reduction policy.

• 대한산업공학회지
• /
• 제17권1호
• /
• pp.83-94
• /
• 1991

This study is concerned with the scheduling problem for mixed-model assembly lines in Just-In-Time(JIT) production systems. The most important goal of the scheduling for the mixed-model assembly line in JIT production systems is to keep a constant rate of usage for every part used by the systems. In this study, we develop two heuristic algorithms able to keep a constant rate of usage for every part used by the systems in the single-level and the multi-level. In the single-level, the new algorithm generates sequence schedule by backward tracking and prevents the destruction of sequence schedule which is the weakest point of Miltenburg's algorithms. The new algorithm gives better results in total variations than the Miltenburg's algorithms. In the multi-level, the new algorithm extends the concept of the single-level algorithm and shows more efficient results in total variations than Miltenburg and Sinnamon's algorithms.

• 한국경영과학회지
• /
• 제23권2호
• /
• pp.103-129
• /
• 1998

Corporate level decision making with multiple decision makers in a consistent way is essential in Decision Support System. However, since the decision makers have different interests and knowledge, the models used by them are also different in their level of abstraction. This makes decision makers waste a lot of efforts for an integrated decision making. The purpose of this paper is to propose an integration mechanism so that collaborative decision making models may be used synthetically in multi-abstraction level. Models are classified as multimedia model, mathematical model, qualitative model, causal ＆ directional model, causal model, directional model and relationship model according to the level of abstraction. The proposed integration mechanism consists of model interpretation phase. model transformation phase, and model integration phase. Specifically, the model transformation Phase is divided into (1) model tightening mode which gather information to make a model transformed into upper level model, and (2) model relaxing mode which makes lower level model. In the model integration phase, models of same level are to be integrated schematically. An illustrative M＆A-decision example is given to show the possibility of the methodology.