• The Journal of the Acoustical Society of Korea
• /
• v.36 no.3
• /
• pp.179-185
• /
• 2017

The problem that occurred in the design/fabrication/testing of the wideband transmitting power amplifier for an embedded active SONAR (Sound Navigation and Ranging) system operating underwater was analyzed and the solution of the problem was proposed in this paper. Wideband acoustic SONAR systems had been developed in order to improve the underwater detection performance. The underwater acoustic transmission system had been also developed to achieve the wideband SONAR system. In this paper, the wideband acoustic transmission signal was generated using a 2 Level sawtooth type Class D PWM (Pulse Width Modulation) which was not complicated to implement. When the sonar signals having two or more frequencies were simultaneously generated, parasitic frequencies were added to the original signals by integer multiples of the frequency difference of the original signal. To cope with this problem, we proposed a way to remove the parasitic frequency from the source signal through modeling and simulation of the implemented power amplifier and PWM control hardware using MATLAB and Simulink.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3B
• /
• pp.144-151
• /
• 2008

In this paper, we propose a video streaming server that guarantees a certain level of quality when a server should serve video streaming service to multiple heterogenous clients simultaneously with TCP transport. If each heterogeneous client requests video streaming service in according to its own requirement such as bitrate of content and these requests are accepted by a server, then TCP flows for each video streaming session fairly share limited uplink bandwidth of the server. At this time, because TCP's bandwidth fair-share characteristics can result in bandwidth shrinkage of higher bitrate video streaming session, the client of higher bitrate video may suffer sluggish playback which is related with streaming QoS degradation. To tackle this problem, our proposed server system uses multiple TCP connections adaptively for each video streaming session depending on the anticipated status of the client playout buffer. Simulation results show that our proposed algorithm can successfully reduce the occurrence of playout buffer underrun and enhance streaming quality for whole video clients.

• Spatial Information Research
• /
• v.19 no.1
• /
• pp.73-82
• /
• 2011

Recently, demand for the use of cadastral map is increasing in both public and private area. To use cadastral map in web or mobile environment, construction of the multi-representation database(MRDB) that is the compressed into multiple scale from the original map data is recommended. In this study, the map generalization methodology for the cadastral map by applying overlay with topographic map and polygon generalization technique is suggested. This process is composed of three steps, re-constructing the network data of topographic map, polygon merging of parcel lines according to network degree, and applying line simplification techniques. Proposed methodologies are applied to the cadastral map in Suwon area. The result map was generalized into 1:5,000, 1:20,000, 1:100,000 scale, and data compression ratio was shown in 15% 8% 1% level respectively.

• Journal of the Korea Society for Simulation
• /
• v.22 no.1
• /
• pp.31-40
• /
• 2013

Recent development in science and technology has modernized the weapon systems of ROKN (Republic Of Korea Navy). Although the cost of purchasing, operating, and maintaining the cutting-edge weapon systems has been increased significantly, the national defense expenditure is under a tight budget constraint. In order to maintain the availability of ships with low cost, we need an efficient and scientific method for managing repairable parts. In this study, we propose a simulation model that computes the availability of ship's repairable parts. Our model is based on the METRIC (Multi Echelon Technique Repairable Item Control) model and extends to five sub-models to reflect the realistic situations that arise in the navy, such as planned maintenance, condemnation, lateral transshipment, and cannibalization. We have performed simulations to compute the availability of repairable parts while setting the part-level consistent throughout the five models and carried out two sensitivity analyses. The simulation results show the differences in the part availability in different models. The experiments confirm our claim that ROKN needs an inventory management system that captures the operational characteristics of the navy.

• Journal of Convergence for Information Technology
• /
• v.8 no.2
• /
• pp.67-75
• /
• 2018

We sought to develop a multi-dimensional tool for measuring and understanding nurse fatigue. The participants were 301 nurses working in four hospitals in Seoul, South Korea. Basic items were developed after a preliminary literature review, and content validity was verified by a group of experts. The first 52 items from which the fatigue measurement tool was to be developed were tested for construct validity and were reduced via factor analysis to 31 items. Following a confirmatory factor analysis, the items were further reduced to 23 items in three categories: physical, mental, and emotional. A confirmatory factor analysis found the items to be adequate. The fatigue scale was found to have high construct validity and reliability. This scale is expected to serve as a preliminary data-gathering tool to assess the level of nurse fatigue and to develop interventions to alleviate it.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.8-13
• /
• 2015

One of the most usual indicators to measure the performance of any inventory policy is the mean physical stock. In general, when estimating the mean physical stock in periodic review inventory systems, approximate approaches are often utilized by practitioners and researchers. The mean physical stock is generally calculated by a simple approximation. Still these simple methods are frequently used to analyze various single stockpoint and multi-echelon inventory systems. However, such a simple approximation can be very inaccurate. This is particularly true for low service levels. Even though exact methods to calculate the mean physical stock have been derived, they are available for specific cases only and computationally not very efficient, and therefore less useful in practice. In literature, approximate approaches, such as the simple, the linear, and Simpson approximations, were derived for the periodic review inventory systems that allow backorders. This paper modifies the approximate approaches for the lost sales case and evaluates the modified approximate approaches. Through computational experiments, average (and maximum) percentage deviations of mean physical stock between the exact method and the modified approximations are compared in the periodic review inventory system with lost sales. The same comparison between the modified and the original approximations are also conducted, in order to examine the performance of modified approximations. The results show that all modified approximations perform well for high service levels, but also that the performance may deteriorate fast with decreasing service level. The modified Simpson approximation is clearly better. In addition, the comparison between the modified and the original approximations in the periodic review inventory system with lost sales shows that the modified approximation outperforms the original approximation.

• YAKHAK HOEJI
• /
• v.52 no.6
• /
• pp.434-440
• /
• 2008

The purpose of this research was to investigate the microbiological quality and antimicrobial susceptibilities of the ready-to-eat side dishes, which are were collected from the grocery stores, big markets, and department stores in Seoul throughout November, 2007. Of total 124 samples, presence of staphylococci and enteric bacilli was observed in 38 samples (31%) and 53 samples (43%), respectively. And 30 samples (24%) were shown to be of unsatisfactory quality for total bacterial count (>$10^5$). Antimicrobial susceptibilities of the staphylococci isolated from the side dishes were tested for six different antimicrobial agents, which are in widespread clinical use in Korea, as well as four new antimicrobials, daptomycin, linezolid, quinupristin/dalfopristin and tigecycline. As a result, the staphylococcal isolates were found to be resistant to oxacillin (${MIC}_{90}$, >128 ${\mu}g$/ml), teicoplanin (${MIC}_{90}$, >128 ${\mu}g$/ml), mupirocin (${MIC}_{90}$, >128 ${\mu}g$/ml), linezolid (${MIC}_{90}$, 128 ${\mu}g$/ ml) and quinupristin/dalfopristin (${MIC}_{90}$, 32 ${\mu}g$/ml). Especially, some of the staphylococcal isolates exhibited high level and multi-drug resistance. Moreover, these bacteria were also resistant to new antimicrobials, except tigecycline.

• Imaging Science in Dentistry
• /
• v.37 no.2
• /
• pp.65-68
• /
• 2007

Purpose: To compare the leakage and scattered radiation from hand-held dental X-ray unit with radiation from fixed dental X-ray unit. Materials and Methods: For evaluation we used one hand-held dental X-ray unit and Oramatic 558 (Trophy Radiologie, France), a fixed dental X-ray unit. Doses were measured with Unfors Multi-O-Meter 512L at the right and left hand levels of X-ray tube head part for the scattered and leakage radiation when human skull DXTTR III was exposed to both dental X-ray units. And for the leakage radiation only, doses were measured at the immediately right, left, superior and posterior side of the tube head part when air was exposed. Exposure parameters of handheld dental X-ray unit were 70 kVp, 3 mA, 0.1 second, and of fixed X-ray unit 70 kVp, 8 mA, 0.45 second. Results: The mean dose at the hand level when human skull DXTTR III was exposed with portable X-ray unit $6.39{\mu}Gy$, and the mean dose with fixed X-ray unit $3.03{\mu}Gy$ (p<0.001). The mean dose at the immediate side of the tube head part when air was exposed with portable X-ray unit was $2.97{\mu}Gy$ and with fixed X-ray unit the mean dose was $0.68{\mu}Gy$ (p<0.01). Conclusions: The leakage and scattered radiation from hand-held dental radiography was greater than from fixed dental radiography.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.4
• /
• pp.321-327
• /
• 2017

This study was carried out to develop a stable plant-derived natural sunscreen (BHC-S) that replaces the artificially synthesized organic sunscreen agents. The natural sunscreen (BHC-S), which is composed of peanut extract, Centella asiatica extract, and Ecklonia stolonifera extract, has the same level of ultraviolet shielding effect as PARSOL MCX-XR (OMC), which is a synthetic sunscreen. and has safety against skin. MultiFunctional effect such as and anti-wrinkle improvement. Thus, it can be used as raw material for natural cosmetics for ultraviolet ray blocking, and anti-aging.

• Journal of the Korea Society for Simulation
• /
• v.26 no.2
• /
• pp.31-39
• /
• 2017

This paper analyses the effectiveness of Kill Chain (KC) and Korea Air and Missile Defense (KAMD), also known as the K2 systems, using monte carlo simulation. It is assumed that the K2 systems are consisted with unitary KC and multi-layered (upper-tier and lower-tier) KAMD. And each system has two or three arbitrary weapon systems and its combination makes 12 scenarios. Measures of effectiveness (MOE) of the K2 systems were defined as ratio of eliminated ballistic missiles from total threats. And total cost was calculated by number of weapon launched and its unit cost. MOE and total cost of the K2 systems were estimated using monte carlo simulation with a thousand iteration for each scenario. Cost-effectiveness analysis was performed and the best candidate was selected using fixed effectiveness approach. As a result, the performances of KC are prime factor that affects both effectiveness and total cost of the K2 systems. It is also, acquired proper level of lower-tier KAMD to achieve desired defense effectiveness. For future work, it needs to be performed cost-effectiveness analysis based on practical specification and life cycle cost of weapon systems.