• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.3
• /
• pp.197-208
• /
• 2016

The WCPFC CMMs related to tropical tunas have been strongly restricting fishing capacity and operating activities of main fisheries, especially purse seine fishery. In terms of changes in fishing trend by implementing relevant measures of FAD set, the number of FAD set by Korean purse seine fleet showed a decreasing pattern with the lowest level of FAD set proportion among major distant water fishing nations. With regards to the FAD closure, there was no significant change in fishing effort but a drop in catch, especially bigeye tuna during the period of FAD closure. Moreover, it showed closely similar trends between the number of FAD set and bigeye tuna catch. In terms of measures related to the high sea area including a ban on fishing on the HSP and limitation of fishing days on the high sea by flag state, proportions of catch and effort on the high sea had sharply declined after implementing those measures. As relevant measures are expected to be strengthened, it should pay attention to change of coastal nations policies and focus on improving fishing efficiency of unassociated school set with multi-pronged efforts.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.1
• /
• pp.39-50
• /
• 2016

Objective: The purposes of this study were to compare the kinematics of a two-arm kettlebell swing between experts and beginners and to identify the correct postures and biomechanical key points in an attempt to prevent sports injuries induced by a kettlebell swing. Methods: Four experts (height, $169.7{\pm}1.5cm$; weight, $70.5{\pm}1.8kg$; age, $32.0{\pm}1.0years$) licensed to teach kettlebell exercises and three beginners (height, $173.7{\pm}4.1cm$; weight, $78.3{\pm}3.8kg$; age, $30.0{\pm}1.4years$) with no kettlebell exercise experience participated in this study. Each participant performed 15 repetitions of a two-arm kettlebell swing using a 16-kg weight. Joint angles, angular velocities, and peak angular velocity sequences were calculated and compared between the two groups. Results: Large ranges of motion (ROM) of the pelvic angle and hip joints were detected in the experts, while beginners showed greater ROM of the shoulder joint. Peak angular velocity magnitudes and sequences were significantly different between the two groups. Experts lifted the kettlebell upward using the hip joints, pelvis, and shoulder joints (proximal to distal order) sequentially and lowered it using the reverse order of peak angular velocities from the shoulder to hip joints. Conclusion: Mobility of the pelvic segment and hip joint are required, while stability of the other joints is needed to produce appropriate two-arm kettlebell swings. The activation and coordination of the gluteal and hamstring muscles are key points in kettlebell exercises.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1323-1328
• /
• 2011

In the current design process for the lower arm used in automobile parts, an optimal solution of its various design variables should be found through exploration of the design space approximated using the response surface model formulated with a first- or second-order polynomial equation. In this study, a multi-level computational DOE (design of experiment) was carried out to explore the design space showing nonlinear behavior, in terms of factors such as the total weight and applied stress of the lower arm, where a fractional-factorial orthogonal array based on the artificial neural network model was introduced. In addition, the tolerance robustness of the optimal solution was estimated using a tolerance optimization with six sigma constraints, taking into account the tolerances occurring in the design variables.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.5
• /
• pp.433-441
• /
• 2011

The optimization of a centrifugal compressor was conducted. The ANN (Artificial Neural Network) was adopted as an optimization algorithm, and it was learned and trained with the DOE (Design of Experiment). In the DOE, it was predicted the main effect and the interaction effect of design variables to the objective function. The ANN was improved in the optimization process using the GA (Genetic Algorithm). When any output at each generation was reached a standard level, it was re-calculated by the CFD (Computational Fluid Dynamics) and it was applied to develop a new ANN. After 6th generation, the prediction difference between ANN and CFD was less than 1%. A pareto of the efficiency versus the pressure ratio was obtained through the 21th generation. Using this method, the computational time for the optimization was equivalent to the time consumed by the gradient method, and the optimized results of multi-objective function were obtained.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.229-232
• /
• 2003

A waste container, one of the key compartments in a multi-barrier system for a potential high level radioactive waste (HLW) repository in Korea ensures the mechanical stability against the lithostatic pressure of a deep geologic strata and the swelling pressure of the bentonite buffer. Also, it prohibits potential release of radionuclides for a certain period of time. before it is corroded by impurities. Even though the materials of a waste container is carefully chosen and all manufacturing processes are under heavy quality assurance, there might be a slight chance of intial defects in a waste container. Also, during the deposition of a waste container in a repository, there might be a chance of an incident affecting the integrity of a waste container. In this study, the FEP's and the scenarios over radiological impact of a potential initial waste container defect was developed. Then the total system performance assessment on this initial waste container failure (ICF) scenario was carried out by the MASCOT-K, one of the probabilistic safety assessment tools KAERI has developed. Results show that for the data set studied in this paper, the annual individual dose by the ICF scenario well meets the KINS regulation.

• Economic and Environmental Geology
• /
• v.29 no.4
• /
• pp.495-508
• /
• 1996

This study had three purposes: (1) to investigate dispersion and enrichment level of potentially toxic elements; (2) to identify uranium-bearing minerals in black shales; and (3) to assess the chemical speciation of heavy metals in soils and sediments. Rock, surface soil and stream sediment samples were collected in the Chungjoo area covered with black shales in Korea. These samples were analyzed for multi-elements using INAA and ICP-AES. The maximum abundance of U in black shales is 56 ppm and radioactivity counts up to 240CPM. Molybdenum, V, Ba, Cu, and Pb are enriched in black shales and most of soils show high concentrations of U, Mo, Ba, Cu, Pb and Zn. Concentrations of potentially toxic elements decrease in the order of mountain soil > farmland soil > paddy soil. Enrichment index of soils and sediments are calculated and higher than 1.0 in the black shale area with the highest value of 6.1. In order to identify U-bearing minerals, electron probe micro analysis was applied, and uraninite and brannerite in black shale were found. Uraninite grains are closely associated with monazite or pyrite with the size of $2{\mu}m$ to $10{\mu}m$ in diameter whereas brannerite occurs as $50{\mu}m$ euhedral grains. With the results of sequential extraction scheme, residual fractions of Cu, Pb and Zn in soils are mainly derived from weathering of black shale but Cu, Pb and Zn in sediments are present as non-residual fractions. Lead is predominantly present as oxidizable phase in soils whereas Zn is in exchageable/water-acid soluble phase in sediments.

• Archives of design research
• /
• v.11
• /
• pp.62-68
• /
• 1995

------Recently. as the level of common consumer thoughts of design has been highly developed. and the design oriented attitude of consumers. and it's research of behavior. are studied widely in business administration field. Accordingly the study of design has been endeavor to be studied bilaterlly by with related study like marketing as to secure the co-operative results and or conclusions which explain the consumer behaviors of product purchasing. This study is one of the conceptional trials steps which get in touch of design cognizance theoretically in design field. Main cotents are. A) The design oriented multi-attribute attitude factors regarding to consumer decision making. B) The design factors which give influences on purchasing products. C) The particularity of design factors is to be make on design cognizance. For these purpose, this study. above all. tries to survey the circumstance of design cognizance and the processing system of organizing design information. Finally "The product design cognizance system on consumers is represented hereinafter.fter.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2004.05a
• /
• pp.341-346
• /
• 2004

In the present work, for various energy and electricity generating systems to be compared in view of integrated social impacts, nuclear, coal-fired, heavy oil-fired, and LNG, and hydroelectricity systems are considered as electricity generating options. The following assessment factors are selected: economic effect, health effect, environmental effect, and benefit at the national level. As a preliminary study, these factors are represented as power generation cost, estimated mortality, Carbon Dioxide gas emission, and fuel supply stability, respectively. For integrated representation of a multi-criteria decision-making (MCDM) problem, radar charts are introduced to facilitate a comparative recognition of estimates. In the near future, based on the estimates, a MCDM methodology for both qualitative and quantitative comparison will be developed.

• Journal of Engineering Education Research
• /
• v.8 no.1
• /
• pp.20-30
• /
• 2005

Recently, a new education paradigm 'Self-directed Learning' has attracted considerable attention. Problem-Based Learning (PBL) has been recognized as methodology to help students expand scientific thinking and knowledge. improve applicability, develope critical knowledge, and creatively solve problems. There have been significant efforts to develope PBL-based courses in mechanical engineering. A new PBL-based, multi-disciplinary course 'Product Dissection and Design Reasoning' has been developed in this paper. The course examines the way in which products and machines work and is intended to show freshman or sophomore level students how fundamental physical principles relate to engineering practice through hands-on dissection experience : thus, the course emphasizes the importance of knowledge of the fundamental physics for design reasoning. The primary role of this course is to develop creative design manpower. This paper describes the philosophy and content of this course and presents results from one year of development.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.3
• /
• pp.244-249
• /
• 2010

The design of error correction code with low complexity has a good attraction for next generation multi-level cell flash memory. Sharing sub-expressions is effective method to reduce complexity and chip size. This paper proposes a new design method of m-bit parallel BCH encoder based on serial linear feedback shift register structure with low complexity using sub-expression. In addition, general algorithm for obtaining the sub-expression is introduced. The sub-expression can be expressed by matrix operation between sub-matrix of generator matrix and sum of two different variables. The number of the sub-expression is restricted by. The obtained sub-expressions can be shared for implementation of different m-parallel BCH encoder. This paper is not focused on solving a problem (delay) induced by numerous fan-out, but complexity reduction, expecially the number of gates.