• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.59-65
• /
• 2015

To build a flexible network than traditional transport network, the carrier ethernet technology is emerging in network industry recently and MPLS-TP technologies are being applied as a major standard technology for the carrier ethernet. However, network management technologies required to handle equipment installed in MPLS-TP network are not clear. This paper propose an efficient method to build a management network automatically without any additional configuration when network equipments are installed in MPLS-TP network. The proposed scheme reduce cost required for both equipment installation and network maintenance by minimizing configuration procedures of connecting management system with network. We evaluated the effectiveness of the proposed scheme by applying the scheme to a real MPLS-TP equipment.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1
• /
• pp.4-10
• /
• 2000

The work presented in this paper is about a postprocessor, which improves the performance of automatic speech segmentation system by correcting the phoneme boundary errors. We propose a postprocessor that reduces the range of errors in the auto labeled results that are ready to be used directly as synthesis unit. Starting from a baseline automatic segmentation system, our proposed postprocessor trains the features of hand labeled results using multi-layer perceptron(MLP) algorithm. Then, the auto labeled result combined with MLP postprocessor determines the new phoneme boundary. The details are as following. First, we select the feature sets of speech, based on the acoustic phonetic knowledge. And then we have adopted the MLP as pattern classifier because of its excellent nonlinear discrimination capability. Moreover, it is easy for MLP to reflect fully the various types of acoustic features appearing at the phoneme boundaries within a short time. At the last procedure, an appropriate feature set analyzed about each phonetic event is applied to our proposed postprocessor to compensate the phoneme boundary error. For phonetically rich sentences data, we have achieved 19.9 % improvement for the frame accuracy, comparing with the performance of plain automatic labeling system. Also, we could reduce the absolute error rate about 28.6%.

• Journal of Korean Neurosurgical Society
• /
• v.65 no.6
• /
• pp.772-778
• /
• 2022

Objective : Endovascular treatment of large, wide-necked intracranial aneurysms by coil embolization is often complicated by low rates of complete occlusion and high rates of recurrence. A flow diverter device has been shown to be safe and effective for the treatment of not only large and giant unruptured aneurysms, but small and medium aneurysms. However, in Korea, its use has only recently been approved for aneurysms <10 mm. This study aims to compare the safety and efficacy of flow diversion and coil embolization for the treatment of unruptured aneurysms ≥7 mm. Methods : The participants will include patients aged between 19 and 75 years to be treated for unruptured cerebral aneurysms ≥7 mm for the first time or for recurrent aneurysms after initial endovascular coil embolization. Participants assigned to a flow diversion cohort will be treated using any of the following devices : Pipeline Flex Embolization Device with Shield Technology (Medtronic, Minneapolis, MN, USA), Surpass Evolve (Stryker Neurovascular, Fremont, CA, USA), and FRED or FRED Jr. (MicroVention, Tustin, CA, USA). Participants assigned to a coil embolization cohort will undergo traditional endovascular coiling. The primary endpoint will be complete occlusion confirmed by cerebral angiography at 12 months after treatment. Secondary safety outcomes will evaluate periprocedural and post-procedural complications for up to 12 months. Results : The trial will begin enrollment in 2022, and clinical data will be available after enrollment and follow-up. Conclusion : This article describes the aim and design of a multi-center, randomized, open-label trial to compare the safety and efficacy of flow diversion versus traditional endovascular treatment for unruptured cerebral aneurysms ≥7 mm.

• Information Systems Review
• /
• v.25 no.3
• /
• pp.27-41
• /
• 2023

Unlike the previous works focusing on the state-of-the-art methodologies to improve the performance of machine learning models, this study improves the 'quality' of training data used in machine learning. We propose a method to enhance the quality of training data through the processing of 'local grammar,' frequently used in corpus analysis. We collected a vast amount of unstructured corporate review text data posted by employees working in the top 100 companies in Korea. After improving the data quality using the local grammar process, we confirmed that the classification model with local grammar outperformed the model without it in terms of classification performance. We defined five factors of work engagement as classification categories, and analyzed how the pattern of reviews changed before and after the COVID-19 pandemic. Through this study, we provide evidence that shows the value of the local grammar-based automatic identification and classification of employee experiences, and offer some clues for significant organizational cultural phenomena.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.1
• /
• pp.392-412
• /
• 2018

Due to the semantic gap problem across different modalities, automatically retrieval from multimedia information still faces a main challenge. It is desirable to provide an effective joint model to bridge the gap and organize the relationships between them. In this work, we develop a deep image annotation and classification by fusing multi-modal semantic topics (DAC_mmst) model, which has the capacity for finding visual and non-visual topics by jointly modeling the image and loosely related text for deep image annotation while simultaneously learning and predicting the class label. More specifically, DAC_mmst depends on a non-parametric Bayesian model for estimating the best number of visual topics that can perfectly explain the image. To evaluate the effectiveness of our proposed algorithm, we collect a real-world dataset to conduct various experiments. The experimental results show our proposed DAC_mmst performs favorably in perplexity, image annotation and classification accuracy, comparing to several state-of-the-art methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1168-1174
• /
• 2011

The IEFT has recently considered to provide flow mobility for multi-interface MN in the PMIPv6. In this paper, we proposed an extended BCE of the LMA and a novel mechanism for flow mobility of PMIPv6. With our proposal BCE and mechanism, the LMA can route packets by the flow label and hence packet loss during handover can be eliminated. Also, to validate our flow mobility scheme, we designed and implemented the PMIPv6 packet data unit and database of both LMA and MAG, and configured a testbed for flow mobility in PMIPv6. And the support of flow mobility was configured with the network connectivity test in our testbed. According to the Wireshark results, we can see that our proposed scheme works wells for flow mobility in PMIPv6.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.772-776
• /
• 2004

This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.

• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.306-314
• /
• 2023

Stream sediments are an important component of water quality management because they are receptors of various pollutants such as heavy metals and organic matters emitted from upland sources and can be secondary pollution sources, adversely affecting water environment. To effectively manage the stream sediments, identification of primary sources of sediment contamination and source-associated control strategies will be required. We evaluated the performance of machine learning models in identifying primary sources of sediment contamination based on the physico-chemical properties of stream sediments. A total of 356 stream sediment data sets of 18 quality parameters including 10 heavy metal species(Cd, Cu, Pb, Ni, As, Zn, Cr, Hg, Li, and Al), 3 soil parameters(clay, silt, and sand fractions), and 5 water quality parameters(water content, loss on ignition, total organic carbon, total nitrogen, and total phosphorous) were collected near abandoned metal mines and industrial complexes across the four major river basins in Korea. Two machine learning algorithms, linear discriminant analysis (LDA) and support vector machine (SVM) classifiers were used to classify the sediments into four cases of different combinations of the sampling period and locations (i.e., mine in dry season, mine in wet season, industrial complex in dry season, and　industrial complex in wet season). Both models showed good performance in the classification, with SVM outperformed LDA; the accuracy values of LDA and SVM were 79.5% and 88.1%, respectively. An SVM ensemble model was used for multi-label classification of the multiple contamination sources inlcuding landuses in the upland areas within 1 km radius from the sampling sites. The results showed that the multi-label classifier was comparable performance with sinlgle-label SVM in classifying mines and industrial complexes, but was less accurate in classifying dominant land uses (50~60%). The poor performance of the multi-label SVM is likely due to the overfitting caused by small data sets compared to the complexity of the model. A larger data set might increase the performance of the machine learning models in identifying contamination sources.

• Journal of KIISE:Software and Applications
• /
• v.37 no.5
• /
• pp.378-385
• /
• 2010

The explosive increase in the use of email has made to need email classification efficiently and accurately. Current work on the email classification method have mainly been focused on a binary classification that filters out spam-mails. This methods are based on Support Vector Machines, Bayesian classifiers, rule-based classifiers. Such supervised methods, in the sense that the user is required to manually describe the rules and keyword list that is used to recognize the relevant email. Other unsupervised method using clustering techniques for the multi-category classification is created a category labels from a set of incoming messages. In this paper, we propose a new automatic email multi-category classification method using NMF for automatic category label construction method and dynamic category hierarchy method for the reorganization of email messages in the category labels. The proposed method in this paper, a large number of emails are managed efficiently by classifying multi-category email automatically, email messages in their category are reorganized for enhancing accuracy whenever users want to classify all their email messages.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.7
• /
• pp.45-52
• /
• 2012

In this paper, an crowd density in elevator estimation method based on multi-class Adaboost classifier is proposed. The SOM (Self-Organizing Map) based conventional methods have shown insufficient performance in practical scenarios and have weakness for low reproducibility. The proposed method estimates the crowd density using multi-class Adaboost classifier with texture features, namely, GLDM(Grey-Level Dependency Matrix) or GGDM(Grey-Gradient Dependency Matrix). In order to classify into multi-label, weak classifier which have better performance is generated by modifying a weight update equation of general Adaboost algorithm. The crowd density is classified into four categories depending on the number of persons in the crowd, which can be 0 person, 1-2 people, 3-4 people, and 5 or more people. The experimental results under indoor environment show the proposed method improves detection rate by about 20% compared to that of the conventional method.