• 제어로봇시스템학회논문지
• /
• 제15권1호
• /
• pp.99-104
• /
• 2009

This article describes the analysis of stable grasping for multi-fingered robot. An analysis method of stable grasping, which is based on the three-dimensional acceleration convex polytope, is proposed. This method is derived from combining dynamic equations governing object motion and robot motion, force relationship and acceleration relationship between robot fingers and object's gravity center through contact condition, and constraint equations for satisfying no-slip conditions at every contact points. After mapping no-slip condition to torque space, we derived intersected region of given torque bounds and the mapped region in torque space so that the intersected region in torque space guarantees no excessive torque as well as no-slip at the contact points. The intersected region in torque space is mapped to an acceleration convex polytope corresponding to the maximum acceleration boundaries which can be exerted by the robot fingers under the given individual bounds of each joints torque and without causing slip at the contacts. As will be shown through the analysis and examples, the stable grasping depends on the joint driving torque limits, the posture and the mass of robot fingers, the configuration and the mass of an object, the grasp position, the friction coefficients between the object surface and finger end-effectors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1775-1776
• /
• 2008

This paper presents a adaptive fuzzy control suitable for motion control of multi-link robot manipulators with uncertainties. When joint velocities are available, full state adaptive fuzzy feedback control is designed to ensure the stability of the closed loop dynamic. If the joint velocities are not measurable, an observer is introduced and an adaptive output feedback control is designed based on the estimated velocities. To reduce the number of fuzzy rules of the fuzzy controller, we consider the properties of robot dynamics and the decomposition of the unknown input gain matrix. The proposed controller is robust against uncertainties and external disturbances. The validity of the control scheme is demonstrated by computer simulations on a two-link robot manipulator.

• 제어로봇시스템학회논문지
• /
• 제18권3호
• /
• pp.258-266
• /
• 2012

This paper describes a biped walking algorithm for a hydraulic humanoid robot on inclined floors. To realize stable and robust biped walking, the walking algorithm was divided into five control strategies. The first is a joint position control strategy. This strategy is for tracking desired joint position trajectories with a gain switching. The second is a multi-model based ZMP (Zero Moment Point) control strategy for dynamic balance. The third is a walking pattern flow control strategy for smooth transition from step to step. The fourth is an ankle compliance control, which increases the dynamic stability at the moment of floor contact. The last is an upright pose control strategy for robust walking on an inclined floor. All strategies are based on simple pendulum models and include practical sensory feedback in order to implement the strategies on a physical robot. Finally, the performance of the control strategies are evaluated and verified through dynamic simulations of a hydraulic humanoid on level and inclined floors.

• 대한기계학회논문집A
• /
• 제38권6호
• /
• pp.585-592
• /
• 2014

본 논문에서는 도마뱀 로봇 설계를 위한 생체운동 모사 다물체 동역학 시뮬레이터가 개발되었다. 시뮬레이터에 사용된 다물체-기구 동역학 모델은 상용 소프트웨어인 RecurDyn 에 쿠반에놀 도마뱀의 모션 캡쳐 데이터와 Micro-CT 데이터를 적용하여 생성되었다. 다양한 도마뱀의 보행 운동 특성 해석을 위해서 생체운동 시뮬레이터는 궤적 생성모듈, 역기구학 모듈, 역동역학 모듈로 구성된다. 궤적생성 모듈은 도마뱀의 속도에 따른 척추운동과 발 궤적을 생성한다. 또한, 도마뱀 로봇 설계를 위해서 역기구학을 통한 관절 각도 계산과 그를 통한 역동역학 해석으로 이동속도에 대한 요구 조인트 구동력을 생성한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.504-509
• /
• 1990

This paper presents a decentralized adaptive control scheme for multi-Joint robot manipulators based on the independent joint control scheme. The control object is to achieve accurate tracking of desired Joint trajectories. The proposed control scheme does not use the complex manipulator dynamic model, and each joint is controlled simple by a feedback controller which ensure stable and also a position-velocity-acceleration feedforward controller and also auxiliary signal, with adjustable gains. Simulation results are given for a two-link manipulator under independent control, proposed decentralized adaptive control of manipulator is feasible. In spite of a pay load variation and strong static and dynamic couplings that exist between the joints.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1998년도 동계 학술대회 논문집
• /
• pp.475-480
• /
• 1998

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.328-335
• /
• 2022

With the advance of robot capabilities and functionalities, construction robots assisting construction workers have been increasingly deployed on construction sites to improve safety, efficiency and productivity. For close-proximity human-robot collaboration in construction sites, robots need to be aware of the context, especially construction worker's behavior, in real-time to avoid collision with workers. To recognize human behavior, most previous studies obtained 3D human poses using a single camera or an RGB-depth (RGB-D) camera. However, single-camera detection has limitations such as occlusions, detection failure, and sensor malfunction, and an RGB-D camera may suffer from interference from lighting conditions and surface material. To address these issues, this study proposes a novel method of 3D human pose estimation by extracting 2D location of each joint from multiple images captured at the same time from different viewpoints, fusing each joint's 2D locations, and estimating the 3D joint location. For higher accuracy, the probabilistic representation is used to extract the 2D location of the joints, considering each joint location extracted from images as a noisy partial observation. Then, this study estimates the 3D human pose by fusing the probabilistic 2D joint locations to maximize the likelihood. The proposed method was evaluated in both simulation and laboratory settings, and the results demonstrated the accuracy of estimation and the feasibility in practice. This study contributes to ensuring human safety in close-proximity human-robot collaboration by providing a novel method of 3D human pose estimation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.507-512
• /
• 1997

This paper presents a method of finding optitnal joint torques of two robots when they hold an object simultaneously. Although the importance of the multiple cooperating robot system increases for more flcviblc ni;mufacturing automation, dynamic solutions to multi-robot system forming closcd kinematic chain is not easy to find. Newton-Eulcr approach is used for the dynamic formulation of two robots fonn~ng closcd kincmatic chains gmsping a rigid body object. The nrcthodology to optimize the joint torques to satisfy given criterta and obtain bettcr control of the system is discussed. The scheme is illustrated by an example.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.799-802
• /
• 1997

This paper deals with a new method to derive the Generalized Jacobian Matrix of a space robot. In a conventional method to derive the Generalized Jacobian Matrix, generalized coordinates select Joint angles and a space robot body's position and attitude angle. But, in this paper, we select position and attitude angle of the end-effector or the handled floating object as generalized coordinates. Then, we can derive the Generalized Jacobian Matrix of the system which consists of several space robots and a handled floating object. Moreover control methods operated by only one space robot can be easily extended to the cases of cooperation task by several space robots. Computer simulations show that the Generalized Jacobian Matrix derived here is effective.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.323-326
• /
• 1997

Conventional robots actuated by motors with the speed reducer such as harmonic drive had weakness in delivering loads, pressing, grinding, and cutting jobs. To overcome this, the developer a new type of robot actuated by the ball screw. The robot is an articulated shape, which is composed of four axes. The base axis is actuated similarly with conventional robot, but the others are actuated by four bars mechanism composed of the ball screw. We setup the dynamics model of the robot. The robot has parameter uncertainties and nonlinearlity due to the ball screw actuator. To coordinate the robot, we applied sliding-mode control.