• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.97-102
• /
• 2016

The UFMC(Universal Filtered Multi-Carrier) is one of multi-carrier transmission technique as a candidate of transmission method for the recent 5G communication system. The UFMC can be considered as the system which has both the advantages of OFDM(Orthogonal Frequency Division Multiplex) and the simplicity of FBMC(Filter Bank Multi-Carrier). CFO(Carrier Frequency Offset) causes the problem to lower the BER performance due to a mismatch between the sub-carriers in multi-carrier transmission scheme. The effect of CFO on UFMC is not greater than the OFDM. But it still degrades the system performance caused by interference between the sub-band. In this paper, we analyze the SNR degradation due to changes in the value of EsNo and CFO on UFMC system.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.13-16
• /
• 2002

In this paper, we propose adaptive despreading receiver for multi-code PW-CDMA system with binary-level clipping. The distortion due to clipping the multi-level signal causes the performance degradation. Adaptive despreading alleviates the effect of clipping. It is shown that the proposed adaptive despreading receiver achieves smaller BER than conventional despreading receiver for multi-code PW-CDMA system with binary-level clipping.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.1
• /
• pp.153-163
• /
• 2007

An adaptive framework paradigm where the bandwidth values of the ongoing calls vary according to the trafficsituations is one of the promising concepts for overcoming poor resource conditions due to handoffs in mobilecellular networks. However, quantifying the level of bandwidth degradation of the ongoing calls in an adaptiveframework is important in view of Quality of Service (QoS) Provisioning. Therefore we introduce new QoSparameters, the Degradation Degree Ratio (DDR), which represents the average portion of the degradationdegree during degradation pehod of a call, and the Degradation Area Ratio (DAR), which represents the averageratio of a call's degradation level considering both the period and the degree of degradation jointly in multi-levelbandwidth service. We also develop a new analytical model for estimating the QoS measures such as theDegradation Pehod Ratio (DPR), DDR and DAR. We show how to calculate the QoS measures and illustrate themethod by numerical examples. The proposed model can be used to determine the optimal parameter of theCAC scheme and analyze the sensitivity ofthe QoS parameters in adaptive networks.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.11
• /
• pp.62-69
• /
• 1998

The general degradation model has been applied to analyze the hot carrier induced degradation of the DC and RF characteristics of RF-nMOSFET. The degradation of cut-off frequency has been severer than the degradation of bulk MOSFET drain current. The value of the degradation rate n and the degradation parameter m for RF-nMOSFET has been equal to those for bulk MOSFET. The decrease of device degradation with the increase of fingers could be explained by the large source/drain parasitic resistance and drain saturation voltage. It has been also found that the RF performance degradation could be explained by the decrease of $g_{m}$ and $C_{gd}$ and the increase of $g_{ds}$ after stress. The degradation of the DC and RF characteristics of RF-nMOSFET could be predicted by the measurement of the substrate current.t.

• Journal of the Optical Society of Korea
• /
• v.5 no.1
• /
• pp.9-15
• /
• 2001

The ocean Scanning Multi-spectral Imager (OSMI) is a payload on the KOrea Multi-Purpose SATellite (KOMPSAT) to perform worldwide ocean color monitoring f the study of biological oceanography. OSMI performs solar and dark calibrations for on-orbit instrument calibration. The purpose of the solar calibration is to monitor the degradation of imaging performance for each pixel of 6 spectral bands and to correct the degradation effect on OSMI image during the ground station date processing. The design, the operation concept, and the radiometric characteristics of the solar calibration are investigated. A linear model of image response and a solar calibration radiance model are proposed to study the instrument characteristics using the solar calibration data. The performance of spectral responsivity and spatial response uniformity. The first solar calibration data and the analysis results are important references for further study on the on-orbit stability of OSMI response during its lifetime.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.322.1-322.1
• /
• 2014

Many research groups have studied tandem or multi-junction cells to overcome this low efficiency and degradation. In multi-junction cells, band-gap engineering of each absorb layer is needed to absorb the light at various wavelengths efficiently. Various absorption layers can be formed using multi-junctions, such as hydrogenated amorphous silicon carbide (a-SiC:H), amorphous silicon germanium (a-SiGe:H) and microcrystalline silicon (${\mu}c$-Si:H), etc. Among them, ${\mu}c$-Si:H is the bottom absorber material because it has a low band-gap and does not exhibit light-induced degradation like amorphous silicon. Nevertheless, ${\mu}c$-Si:H requires a much thicker material (>2 mm) to absorb sufficient light due to its smaller light absorption coefficient, highlighting the need for a high growth rate for productivity. ${\mu}c$-SiGe:H has a much higher absorption coefficient than ${\mu}c$-Si:H at the low energy wavelength, meaning that the thickness of the absorption layer can be decreased to less than half that of ${\mu}c$-Si:H. ${\mu}c$-SiGe:H films were prepared using 40 MHz very high frequency PECVD method at 1 Torr. SiH4 and GeH4 were used as a reactive gas and H2 was used as a dilution gas. In this study, the ${\mu}c$-SiGe:H layer for triple solar cells applications was performed to optimize the film properties.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2226-2234
• /
• 2016

Orthogonal Frequency Division Multiplexing (OFDM) technique uses multiple sub-carriers for the data transmission. Therefore, Inter Carrier Interference(ICI) is generated because of nonlinear high power amplifier and carrier frequency offset. Wireless OFDM transmission over Doppler fading channels also causes ICI. In OFDMA(Orthogonal Frequency Division Multiplexing Access), multiple sub-carriers are allocated to each user. Therefore, inter carrier interference causes interference to other users. I evaluate the BER performance of OFDMA systems in frequency selective fading channel, considering Multi-User Interference (MUI) owing to the carrier frequency offset, the nonlinear high power amplifier, and the Doppler fading. In the uplink OFDMA, multi-user interference introduces larger BER degradation than in the downlink. I explain the reason and obtain the required characteristics of the nonlinear amplifier and the value of frequency offset for good BER performance. And I also analyze the BER degradation upon Doppler fading channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.4
• /
• pp.415-423
• /
• 2016

High PAPR (Peak-to-Average Power Ratio) characteristic causes some problems like system performance degradation and OOB (Out-of-Band) power increasement under the HPA (High Power Amplifier) nonlinearity condition. UFMC (Universal Filtered Multi-Carrier) and FBMC (Filter Bank Multi-Carrier) are regarded as 5G(Generation) candidate waveforms. In this paper, we evaluate and analyze performance of these systems with DFT-s (Discrete Fourier Transform Spreading) technique under the nonlinear HPA environment. In this paper, we describe OFDM (Orthogonal Frequency Division Multiplexing), UFMC, FBMC, DFT-s-OFDM, DFT-s-UFMC, and DFT-s-FBMC system, and evaluate BER (Bit Error Rate) performance of these systems. As simulation results, BER performance degradation by HPA nonlinearity of DFT-s-OFDM and DFT-s-UFMC is greatly overcome by DFT spreading technique. However, BER performance degradation by HPA nonlinearity of DFT-s-FBMC system is little overcome.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.14 no.2
• /
• pp.81-88
• /
• 2008

There are increasing public concerns that the disposal of most synthetic carbon-based plastics is a great threat to the environment. These have led to intensive research and development of degradable plastics, such as biodegradable plastics, photodegradable plastics, and multi-degradable plastics. Although these degradable plastics may not completely replace common synthetic plastics, these minimize environmental impacts caused by non degradable plastics. Photodegradable plastics are synthetic polymers into which have been incorporated copolymers or light-sensitive additives to weaken the structural bonds in polymer chains when exposed to UV radiation. A better understanding of photodegradable plastics, which also play an important role in the degradation of multi-degradable plastics, will expand the usage of degradable plastics. The aim of present article is to review the formation, degradation mechanism and properties of photodegradable plastics.

• Computers and Concrete
• /
• v.23 no.2
• /
• pp.107-119
• /
• 2019

In-service reinforced concrete structures are simultaneously subjected to a combination of multi-deterioration environmental actions and mechanical loads. The combination of two or more deteriorative actions in environments can potentially accelerate the degradation and aging of concrete materials and structures. This paper reviews the coupling and synergistic mechanisms among various deteriorative driving forces (e.g. chloride salts- and carbonation-induced reinforcement corrosion, cyclic freeze-thaw action, alkali-silica reaction, and sulfate attack). In addition, the effects of mechanical loads on detrimental environmental factors are discussed, focusing on the transport properties and damage evolution in concrete. Recommendations for advancing current testing methods and predictive modeling on assessing the long-term durability of concrete with consideration of the coupling effects are provided.