• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.272-282
• /
• 2004

This paper introduces a regularized mixed norm multi-channel image restoration algorithm using both within-and between- channel deterministic information. For each channel a functional which combines the least mean squares (LMS), the least mean fourth (LMF), and a smoothing functional is proposed. We introduce a mixed norm parameter that controls the relative contribution between the LMS and the LMF, and a regularization parameter defining the degree of smoothness of the solution, where both parameters are updated at each iteration according to the noise characteristics of each channel. The novelty of the proposed algorithm is that no knowledge of the noise distribution for each channel is required and that the parameters mentioned above are adjusted based on the partially restored image.

• Journal of KIISE:Databases
• /
• v.35 no.6
• /
• pp.518-532
• /
• 2008

Broadcast scheme has been widely researched for efficient data delivery in the mobile environment because the downlink capacity of a mobile client is much greater than the uplink capacity, and the power of a mobile client is limited. In the proposed scheme, the index lets the client know when data items would be broadcasted and enables the client to minimize the tuning time and power consumption. Single channel index schemes are fit to flat broadcast that performs well when all the broadcasted data items are accessed with the same probability whereas the multi-disk broadcast scheme is proper when the data access distribution is skewed. The existing index schemes, however, cannot work on the Multi-disk broadcast scheme because they cannot point the replicating data items in a broadcast cycle. This paper proposes a Multi-disk Exponential Index (MDEI) which is a single channel index scheme fit to Multi-disk broadcast scheme. Because MDEI scheme organizes a separate index for each disk, it functions with multi-disk broadcast, resulting in a greater reduction of average access latency than that of other flat-broadcast index schemes when the data access distribution is skewed. The performance evaluation showed that MDEI has a good performance when data access distribution is skewed. MDEI has short average access latency and not much average tuning time when the data access distribution is skewed.

• Journal of Korean Society for Quality Management
• /
• v.42 no.4
• /
• pp.665-684
• /
• 2014

Purpose: The purpose of this study was to test and verify on the interrelationship among Service Quality, and Customer Satisfaction and Customer Loyalty in the Humidifier Goods industry. Especially, we study on the relative importance of each CS variables by distribution channel. Nowadays, most of manufacturing companies are proceeding the product servitization, which is combined service contents with product characteristics in the field of manufacturing industries. Methods: We surveyed humidifier purchaser about the some of CS variables and analyzed it using SPSS 21.0 and AMOS 21.0 as a statistical analysis tool. We use the frequency analysis, confirmatory factor analysis, multi-regression analysis and structural equation modeling analysis for our empirical study. Results: As the result of study, we find that Service Quality(SQ) influence Customer Satisfaction(CS) and CS influence Customer Loyalty(CL). Also, we verify that CS works mediate interaction on the effects between SQ and CL. And there are the significant relative effect of SQ to Customer Satisfaction in some of distribution channel. Conclusion: Finally, we make certain that the market size of the Humidifier goods industry will be increased rapidly. And the distribution channe l is more important to medium and small-sized enterprise. So, we have to pay attention to the study on the distribution channel of the Humidifier goods industry. And then, we expect more researches and studies on Service Quality and Customer Satisfaction in the field of manufacturing industries.

• The Research Journal of the Costume Culture
• /
• v.26 no.3
• /
• pp.346-359
• /
• 2018

Currently, dramatic change had led to the growth of the distribution environment and the retailer's distribution channel. This change had shifted the 'single channel' to 'multi channel', and from 'cross channel' to 'omni channel'. While fashion companies using omni channel are rapidly growing, few research regarding omni channel had been done in academic field. In this study, we examined the influence of omni channel characteristics on consumers' perceived risk as well as consumers' perceived risk toward attitude and intention to use omni channel. We surveyed 696 male and female respondents aged 20 to 40 who lived in Seoul and the metropolitan area. Using AMOS 20.0, factor analysis, reliability analysis, and structural equation model analysis were performed to verify the model of this study. The results were as follows. First, omni channel's instant connectivity, location-based provability, interactivity, and entertainment factors did not decrease impacts on the perceived risk related to privacy and annoyance. Second, omni channel's instant connectivity and entertainment did not increase effects on the perceived financial risk, and location-based provability and interactivity did not increase effect on perceived financial risk. Third, the perceived risk concerning omni channel did not decrease on consumer attitude toward omni channel. Fourth, consumer attitude toward omni channel influenced the intention to use omni channel significantly.

• Journal of information and communication convergence engineering
• /
• v.5 no.4
• /
• pp.300-304
• /
• 2007

Wireless sensor networks represent a new and exciting communication paradigm which could have multiple applications in future wireless communication. Therefore, performance analysis of such a wireless sensor network paradigm is needed in complex wireless channel. Wireless networks could be an important means of providing ubiquitous communication in the future. In this paper, the BER performance of uniform distributed wireless sensor networks is evaluated in non-Gaussian noise channel. Using an analytical approach, the impact of Av. BER performance relating the coherent BPSK system at the end of a multi-hop route versus the spatial density of sensor nodes and impulsive noise parameters A and $\Gamma$ is evaluated.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.151-154
• /
• 2004

The HANARO, a multi-purpose research reactor of 30 MWth open-tank-in-pool type, has been under normal operation since its initial criticality in February, 1995. Many experiments should be safely performed to activate the utilization of the HANARO. A flow simulated test facility has been developed for the verification of structural integrity of those experimental facilities prior to loading In the HANARO. This test facility is composed of three major parts; a half-core structure assembly, flow circulation system and support system. The half-core structure assembly is composed of plenum, grid plate, core channel with flow tubes, chimney and dummy pool. The flow channels are to be filled with flow orifices to simulate similar flow characteristics to the HANARO. This paper describes an analysis of the flow distribution of the cote channel and compares with the test results. As results, the analysis showed similar flow characteristics compared with those in the test results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.9
• /
• pp.683-694
• /
• 2008

The performance and durability of Polymer Electrolyte Fuel Cells (PEFCs) are strongly influenced by the uniformity of current density, temperature, species distributions inside a cell In order to obtain uniform distributions in them, the optimal design of flowfield must be a key factor. In this paper, the numerical study of land/channel flowfield optimizations is performed, using a multi-dimensional, multi-phase, non-isothermal PEFC model. Numerical simulations reveal more uniform current density and HFR(High Frequency Resistance) distributions and thus better PEFC performance with narrower land/channel width where the less severe oxygen depletion effect near the land region and more uniform contact resistance variation along the in-plane direction are achieved. The present study elucidates detailed effects of land/channel width and assist in identifying optimal flow-field design strategies for the operation of PEFCs.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.980-992
• /
• 2024

Steam line break accident (SLB) in the nuclear reactor is one of the representative Non-LOCA accidents in which thermal-hydraulics and neutron kinetics are strongly coupled each other. Thus, the multi-scale and multi-physics approach is applied in this study in order to examine a realistic safety margin. An entire reactor coolant system is modelled by system scale node, whereas sub-channel scale resolution is applied for the region of interest such as the reactor core. Fuel performance code is extended to consider full core pin-wise fuel behaviour. The MARU platform is developed for easy integration of the codes to be coupled. An initial stage of the steam line break accident is simulated on the MARU platform. As cold coolant is injected from the cold leg into the reactor pressure vessel, the power increases due to the moderator feedback. Three-dimensional coolant and fuel behaviour are qualitatively visualized for easy comprehension. Moreover, quantitative investigation is added by focusing on the enhancement of safety margin by means of comparing the minimum departure from nucleate boiling ratio (MDNBR). Three factors contributing to the increase of the MDNBR are proposed: Various geometric parameters, realistic power distribution by neutron kinetics code, Radial coolant mixing including sub-channel physics model.

• Journal of Distribution Science
• /
• v.19 no.12
• /
• pp.103-114
• /
• 2021

Purpose: This study was conducted with the goal of increasing research interest in H&B stores as a new distribution channel to identify factors influencing the revitalization of the H&B stores in Korea in distribution channels, in detail, the relationships among perceived values, satisfaction, trust, and loyalty. Research design, data and methodology: With 499 respondents, this study used exploratory factor analysis and reliability analysis to verify the reliability and validity of measured variables. Multiple regression was employed as a statistical method for the hypotheses of the study. Results: According to the results of the analysis, H&B stores are targeted by female customers in their 20s and 30s. The findings showed that four perceived values affect store satisfaction and trust. Store satisfaction and trust have positive effects on loyalty. Comparing the two variables, store satisfaction had a slightly stronger effect on loyalty than on trust. Conclusions: This study identified the store’s diverse values for the revitalization of the H&B stores need to provide to customers. The stores need to form facilities that can enhance the value of shops perceived by customers, and to establish distribution strategies that can further increase store satisfaction, trust, and loyalty to expand trading areas as multi-brand shops.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.81-85
• /
• 1992

We design a multi-element photo-detector to measure the size of particles using the diffracted light energy distribution. The scattered profile measured by the photodetector is sampled by a 32 channel analog-to-digital converter. A nonnegative least squares analysis translates the light energy distribution into the corresponding unique particle size distribution. The responses of the particle sizing system are studied theoretically and experimentally.