• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.2
• /
• pp.182-190
• /
• 2009

GPS receivers can be disrupted by intentional or unintentional jamming, then it is unable to receive GPS signals and it is impossible to get the correct navigation results. Anti-jamming schemes using array antennas are being studied well due to high performance of those, and the efforts to apply them to GPS receiver are also being done. A GPS receiver structure for a multiple beam-forming scheme among those schemes has been proposed in this paper, and the performance is also compared with that using a general GPS receiver structure. For a general GPS receiver structure, each satellite signal which is formed by a beam-forming scheme is summed to be processed in a part of digital signal processing. For a proposed GPS receiver structure, however, each satellite signal is respectively processed by a designated channel in a part of digital signal processing. Finally, it is confirmed that the proposed GPS receiver structure is superior to a general GPS receiver structure in a point of the carrier to noise power ratio and the navigation accuracy using a software platform.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1188-1195
• /
• 2012

The trend for the development of radar is the active phased-array radar system. The trade-off between the processing speed and the number of the signal process board for the real time signal processing has to be optimized particularly in multichannel radar system. This paper introduces a transmission technique in order to transmit a large amount of received data from an Antenna Part to Signal Process Part. As a result, the number of the S/L board(COTS board) is reduced to one half, and the margin of the data transmission rate is about 2 times higher than the original method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.295-301
• /
• 2011

A triple-band transceiver module for 2.3/2.5/3.5 GHz mobile WiMAX, IEEE 802.16e, applications is introduced. The suggested transceiver module consists of RFIC, reconfigurable/multi-resonance MIMO antenna, embedded PCB, mobile WiMAX base band, memory and channel selection front-end module. The RFIC is fabricated in $0.13{\mu}m$ RF CMOS process and has 3.5 dB noise figure(NF) of receiver and 1 dBm maximum power of transmitter with 68-pin QFN package, $8{\times}8\;mm^2$ area. The area reduction of transceiver module is achieved by using embedded PCB which decreases area by 9% of the area of transceiver module with normal PCB. The developed triple-band mobile WiMAX transceiver module is tested by performing radio conformance test(RCT) and measuring carrier to interference plus noise ratio (CINR) and received signal strength indication (RSSI) in each 2.3/2.5/3.5 GHz frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.423-428
• /
• 2004

High-data rate and high speed communication techniques are required for wireless mobile communication systems to provide multimedia services. A multiple antenna technology may be used to meet this demand. In this paper, a method for performance improvement of a WCDMA downlink system using space time block coding is proposed in quasi-static Rayleigh fading channels. The proposed receiver uses the cross correlation matrix obtained by each finger corresponding to multi paths. To obtain maximum diversity gain, the inverse of cross correlation matrix and the Hermitian matrix of the channel matrix for each path arc computed, and then applied to received signals. Various simulation results show that the proposed receiver outperforms a conventional receiver in Rayleigh fading channels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.551-559
• /
• 2005

Estimation of unknown signal parameters with sensor array measurements has been investigated quite extensively. Also, there has been in recent years an explosive increase in the number of mobile users in wireless cellular systems, thus contributing to growing levels of multi-user interference. To overcome this problem, application of adaptive antenna array techniques to further increase the channel capacity has been discussed. In this paper, a new model of locally scattered signals in the vicinity of mobiles is proposed by defining the mean steering vector and is manipulated mathematically for several distributions. Under this model an estimation method of the angle of arrival(AOA) is investigated based on a weighted subspace fitting(WSF) technique. Statistical analysis and simulations are also considered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1065-1075
• /
• 2012

For the purpose of providing high data rate real-time services, radio transmission technologies (RTT) for ship ad-hoc network (SANET) based on the Recommendation ITU-R 1842-1 are designed. Physical layer parameters of SANET are contrived to meet the requirements of the specification. In order to improve the link reliability for SANET, in this paper, we investigate the performance of the SANET with the multiple antennas, where receive combining (RC), transmit diversity (TD), and beamforming (BF) are employed, respectively. Based on the analysis of the packet error rate (PER) under the highly correlated maritime wireless channel model, we select the efficient multiple antenna schemes for SANET to improve the link reliability. In addition, the optimal MCS levels for the single-carrier (SC) SANET with the bandwidth of 25 kHz, and the multi-carrier (MC) SANET with the bandwidth of 50 kHz and 100 kHz are finalized.

• Journal of information and communication convergence engineering
• /
• v.2 no.2
• /
• pp.71-75
• /
• 2004

In non-selective frequency environment, it is difficult to take the advantage of path diversity. In the literature, some methods have been proposed to solve the issue. This paper presents a new method to obtain the resolvable path in Indoor Multi-carrier Code Division Multiple Access (MC-CDMA) system by using downlink beam forming. With the aid of downlink beamforming, the most reliable path is found and chosen for the communication link. The new approach is evaluated in term of bit error rate (BER) and power consumption. The simulation results show that the new approach can get better BER performance. However, the cost of BER improvement is a small degradation in power reservation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.2
• /
• pp.165-174
• /
• 2021

This study describes a method of measurement and verification of array manifold of uniform circular array antenna applicable to multistatic Passive Coherent Location(PCL) system using FM broadcasting. In an environment of outdoor test where FM broadcast signals are scattered, array manifold measurement methods using network analyzer and multi-channel digital receiver are introduced. Also, the descriptions and solutions for the test limits of each measurement method and the considerations affecting the measurement accuracy are presented. In addition, to verify the validity of the measured array manifold, the gain and phase difference were compared with the array manifold data obtained by EM simulation, and the effectiveness and accuracy of the measured array manifolds were compared and analyzed by estimating the direction of arrival of the FM broadcast signal received from the multistatic PCL system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.3
• /
• pp.999-1021
• /
• 2023

Differential spatial modulation uses the antenna index to transmit information, which improves the spectral efficiency, and completely bypasses any channel side information in the recommended setting. A generalized distributed multiple turbo coded-cooperative differential spatial modulation based on distributed multiple turbo code is put forward and its performances in Rayleigh fading channels is analyzed. The generalized distributed multiple turbo coded-cooperative differential spatial modulation scheme is a coded-cooperation communication scheme, in which we proposed a new joint parallel iterative decoding method. Moreover, the code matched interleaver is considered to be the best choice for the generalized multiple turbo coded-cooperative differential spatial modulation schemes, which is the key factor of turbo code. Monte Carlo simulated results show that the proposed cooperative differential spatial modulation scheme is better than the corresponding non-cooperative scheme over Rayleigh fading channels in multiple input and output communication system under the same conditions. In addition, the simulation results show that the code matched interleaver scheme gets a better diversity gain as compared to the random interleaver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2B
• /
• pp.159-167
• /
• 2011

LTE-Advanced system requires uplink multi-antenna transmission in order to achieve the peak spectral efficiency of 15bps/Hz. In this paper, the uplink MIMO system model for the LTE-Advanced is proposed and an efficient link adaptation shceme using precoding is considered providing error rate reduction and system capacity enhancement. In particular, the proposed scheme determines a transmission rank by selecting the optimal wideband precoding matrix, which is based on the derived signal-to-interference and noise ratio (SINR) for the minimum mean squared error (MMSE) receivers of $2{\times}4$ multiple input multiple output (MIMO). The proposed scheme is verified by simulation with a practical MIMO channel model. The simulation results of average block-error-rate(BLER) reflect that the gain due to the proposed rank adapted transmission over full-rank transmission is evident particularly in the case of lower modulation and coding scheme (MCS) and high mobility, which means the severe channel fading environment.