• 한국유체기계학회 논문집
• /
• 제15권1호
• /
• pp.52-57
• /
• 2012

Stall inception characteristics are researched to understand stall well. To realize different stall inception patterns, IGV stagger angle was changed. At design IGV stagger angle, spike, which is short length scale, is observed. Decreasing IGV stagger angle, spike changes to mode, which is long length scale, and further decreasing get multi cell. Compressor maps for each IGV stagger are shown to compare different stall inceptions. The characteristics of both spike and mode are confirmed in this experiment. Furthermore, transient from spike to mode is find. multi cell has 4cells and is little bit faster than mode. and multi cell shows 2nd, 3rd characteristics on compressor map.

• 산업기술연구
• /
• 제17권
• /
• pp.213-218
• /
• 1997

This study is concerned with characteristics of bending collapse of aluminum members with multi-cell section. Aluminum is light so it is compatible of being used for vehicle structures members. Bending collpase behaviors of aluminum members with multi-cell section are very complex and tension failure mode are occured in experiment. In this paper, the aluminum members are modeled to be able to represent the tension failure mode and, characteristics of bending collapse of aluminum members with multi-cell section by experimental method are compared with the results of PAM-CRASH.

• 한국통신학회논문지
• /
• 제27권11C호
• /
• pp.1164-1170
• /
• 2002

ACE2000 MPLS시스템에서 MPLS 정합모듈은 ATM 정합모듈과 패킷 포워딩을 수행하는 HFMA(High performance Forwarding Engine and VC Merging board Assembly)모듈로 구성된다. MPLS 정합모듈에서 물리층으로 입력되는 셀은 HFMA의 송신 SAR칩(RSAR)에서 패킷으로 조립된 후 IP룩업 제어기에서 패킷 포워딩을 수행한다. 포워딩된 패킷은 ATM 계층으로 전달되기 위해 수신 SAR칩(TSAR)에서 셀로 다시 세그먼트된 후 ATM 셀 스위치로 전송하기 위해 ALMA(ATM Layer Module Assembly)로 전달된다. MPLS 정합모듈을 ATM 정합보듈로 이용할 때, ALMA는 직접 물리층 보드와 UTOPIA Leve12 인터페이스로 연결되며, 이때 ALMA는 Master Mode로 동작하게 된다 또한 MPLS 정합모듈에서 HFMA TSAR도 Master Mode로 동작하게 된다. 따라서 2개의 Master 모드 사이에서 인터페이스 역할을 수행할 수 있는 Slave 모드의 UTOPIA-L2 Controller가 요구된다. 본 논문에서는 Multi-Ports를 지원할 수 있는 UTOPIA-L2 Controller의 구조 및 셀 제어방법에 대해 고찰해본다.

• 한국추진공학회지
• /
• 제12권3호
• /
• pp.68-75
• /
• 2008

이전에 개발된 병렬 해석 코드를 이용하여 원형 관내에서의 삼차원 데토네이션 파 전파 특성을 관찰 하였다. 일련의 해석을 통하여 직경이 일정한 원형 관에서 반응 속도 상수 값 k에 의존하는 데토네이션 셀 생성 메커니즘을 알 수 있었다. 삼차원 유동에 대한 비정상 유동의 해석 결과는 two-, three-, four-cell 구조의 메커니즘을 잘 보여주었으며, 반응속도 상수 k가 증가함에 따라 생성되는 셀 수가 증가하고 셀의 폭과 길이는 감소하였다. 모든 다중-셀 모드에서 데토네이션 파의 구조와 그을음막 기록은 횡단파의 움직임에 의하여 만들어지며, 데토네이션 파면은 주기적으로 일정한 다각형 및 풍차 형상을 가지게 된다.

• 전력전자학회논문지
• /
• 제24권4호
• /
• pp.279-285
• /
• 2019

This study proposes an enhanced switching pattern that can improve energy transfer efficiency in an active cell-balancing circuit using a multiwinding transformer. This balancing circuit performs cell balancing by transferring energy stored in a specific cell with high energy to another cell containing low energy through a multiwinding transformer. The circuit operates in flyback and buck-boost modes in accordance with the energy transfer path. In the conventional flyback mode, the leakage inductance of the transformer and the stray inductance component of winding can transfer energy to an undesired path during the balancing operation. This case results in cell imbalance during the cell-balancing process, which reduces the energy transfer efficiency. An enhanced switching pattern that can effectively perform cell balancing by minimizing the amount of energy transferred to the nontarget cells due to the leakage inductance components in the flyback mode is proposed. Energy transfer efficiency and balancing speed can be significantly improved using the proposed switching pattern compared with that using the conventional switching pattern. The performance improvements are verified by experiments using a 1 W prototype cell-balancing circuit.

• 한국미생물·생명공학회지
• /
• 제22권1호
• /
• pp.80-84
• /
• 1994

In order to induce the rapid alcohol fermentation through the increases of the cell density in a continuous alcohol fermentation of naked barley, the single-cultivation with S. cerevisiae IS-019(SCM, ordinary control), mixed-cultivation with Saccharomyces uvarum IS-026 having a flocculent ability and S. cerevisiae IS-019(MCM), and mash recirculation by single-cultivation of S. cerevisiae IS-019(MRM) modes were investigated. The cell mass in the mixed-cultivation mode was about 10% higher than that of ordinary control but the final alcohol yield was slightlyl decreased. When recycled the mash with the flow rate of 7 l/h from V$_{6}$ to V$_{5}$ fermentors under the ordinary control, the cell density was distributed at 140~170$\times $10$^{6}$ cell/ml depending upon the fermentorsorders, higher about 20% than that of the ordinary control. Under these conditions the alcohol productivity of the maximum and the overall was 12.16 g/l$\cdot $h with an alcohol of 7.6% at the V$_{5}$ fermentor and 1.19 g/l$\cdot $h with an alcohol of 8.94%, respectively. For higher cell mass it was more effective to apply the mash recirculation mode with the single-cultivation of S. cerevisiae IS-019 in a pilot scale multi-stage CSTR.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.11-12
• /
• 2013

In this research, a novel multi-converter system for the fuel cell diagnostics and the load leveling function under varying load condition is proposed. The proposed system is composed of two converters and operates in two different modes. In the normal mode operation the additional bidirectional converter is used for the load leveling and in the diagnostic mode it is used for implementing integral diagnostics by way of electrochemical impedance spectroscopy (EIS). The proposed method can perform the EIS for fuel cell under varying load conditions with no influence to the load. The validity and feasibility of the proposed system is verified by the experiments and the design procedure of the proposed system is detailed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.562-564
• /
• 2002

Noise reduction and a simplification of a precision measurement system has been performed by changing analog output mode of a load cell into digital output mode. Usually, analog output signal of a few $\mu V$ from a load cell are amplified by amp and acquired by A/D converter. If the distance from a load cell to a DAS(Data Acquisition System) increases, more noise signals are mixed. So, a microprocessor has been integrated into a load cell so that the amplification and A/D conversion of output signals could be done in close proximity to the lode cell for the reduction in mixing of noise. Obtained data from the load cell like this manner are transferred to a computer with digital values(of TTL level). To simplify the configuration of a multi-channel DAS, RS-485 communication system has used for data transfer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.547-550
• /
• 2003

In this paper we report the optimization method of the pattern size of the electrodes in PVA LCD for the transflective mode in order to improve the optical characteristics. Moreover, we designed the electrode of PVA LCD so as to remove the driving voltage difference between transmissive mode and reflective mode. As a result, we expect very simple manufacturing process and high optical performance even if complex process such as a multi cell gap process and multi driving method are not applied

• 전력전자학회논문지
• /
• 제25권5호
• /
• pp.343-349
• /
• 2020

This study proposes a new single inductor converter for DC grid systems. A conventional system is composed of two independent converters for controlling battery and load. This system is simple but it has two inductors that affect power density and efficiency. The proposed converter can reduce the number of inductors by integrating the two converters and relieve voltage stress on switches by using a battery switching cell. Accordingly, power density and efficiency can be improved using a single inductor and lower voltage-rated switches. A prototype of a 500 W converter is built, and each mode is experimented on to confirm the validity of the proposed converter.