• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1227-1234
• /
• 2001

A multi d.o.f robotic manipulator is considered for multi-axis vibration control of a slender structure, using the concept of the flow source based vibration control. In order not to cause the motion saturation of the manipulator system, a hybrid dynamics associated with the flexible and desired manipulator error dynamics is also modeled as the control object. It is numerically shown that the flexible vibrations and the base motions of a test structure can be effectively controlled with the proposed hybrid dynamics.

• 제어로봇시스템학회논문지
• /
• 제22권2호
• /
• pp.89-96
• /
• 2016

This paper describes the design of a force measurement and communication system for the force measuring system in industrial robots. The force measurement and communication system is composed of a multi-axis force sensor and a controller for measuring the forces (x-direction force, y-direction force and z-direction force) and sending the measured forces to the robot's controller (PLC: Programmable Logic Controller). In this paper, the force measurement and communication system was designed and fabricated by using a DSP (Digital Signal Processor). An environment test and a grinding and deburring test using an industrial robot with the force measurement and communication system with three-axis force sensor were carried out to characterize the system. The tests showed that the system could safely measure the forces from the three-axis force sensor and send the measured forces to the industrial robot's controller while the grinding and deburring test was performed. Thus, it is thought that the fabricated force measurement and communication system could be used for controlling the force for an industrial robot's grinding and deburring.

• 전자공학회논문지SC
• /
• 제40권2호
• /
• pp.19-25
• /
• 2003

본 논문에서는 주어진 작업을 반복적으로 수행하는 다입력 다출력 비선형시스템에 대하여 시스템의 (벡터)상대차수 개념을 이용한 확장된 형태의 직접학습제어를 제안한다. 기존의 직접학습제어가 적용될 수 있는 시스템은 상대차수가 제한적인 시스템임을 보이고 고차의 상대차수를 갖는 시스템에 적용 가능한 제어 법칙을 제시한다. 이 제어법칙을 이용하여 다른 형태의 출력 궤적들에 대한 학습을 통하여 얻어진 제어입력들로부터 새로 주어진 원하는 출력 궤적에 대응하는 제어입력을 직접적으로 생성한다. 제안된 직접학습제어의 타당성 및 성능을 보이기 위하여 2축 스카라 로봇에 대한 궤적추종제어의 시뮬레이션 결과를 제시한다

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.49-53
• /
• 2007

In this study, we investigated experimentally the potential of a planer positioning mechanism with three degrees of freedom using a flexure guide and an electromagnetic linear motor. The goal was to produce a multi-axis positioning system with nanometric resolution over a 1-mm stroke. An $X-Y-\theta$ stage was designed based on previous results from a single-axis prototype and was constructed with a flexure guide mechanism and voice coil motor type linear actuators. We examined the necessity of a driving method and control system to ensure high resolution for multi-axis positioning. Experiments were conducted to evaluate the performance, and the results confirmed the mechanism's potential; fine point-to-point (PTP) positioning was achieved over a 1-mm stroke, with a resolution of 2 nm for translation in X-Y and 0.01 asec for yaw in $\theta$.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권2호
• /
• pp.131-135
• /
• 2010

We report on the design of a three-axis missile autopilot using multi-objective control synthesis via linear matrix inequality techniques. This autopilot design guarantees $H_2/H_{\infty}$ performance criteria for a set of finite linear models. These models are linearized at different aerodynamic roll angle conditions over the flight envelope to capture uncertainties that occur in the high-angle-of-attack regime. Simulation results are presented for different aerodynamic roll angle variations and show that the performance of the controller is very satisfactory.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.137-138
• /
• 2006

This paper proposes a controller design analysis for three-axis CNC systems considering both contouring and tracking performance. The proposed analysis inclusively combines axial controllers for each individual feed drive system together with cross-coupling controller at the beginning design stage as an integrated manner. These two controllers used to be separately designed and analyzed since they have different control objectives. The proposed scheme includes a stability analysis for the overall control system and a performance analysis in terms of contouring and tracking accuracy. Computer simulation is performed and the results show the validity of the proposed methodology.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.576-585
• /
• 2016

The current control methods of Y-connected 7 Phase BLDC motor are sine wave current control and square wave control. The sine wave current control method needs dq axis transformation of $7{\times}7$ matrix for current control and very complex. Also this method is not suitable for multi Phase BLDC motor of trapezoidal back emf wave. Therefore, in Y connected multi phase BLDC motor, the square wave current control methods are required. Generally, in the 3Phase BLDC system, Average current control method is used for current control. The average current is obtained that the summation of absolute value of each phase current magnitude is divided by the number of conduction phase. However, if average current control method is applied to multi-phase system, there is a problem that each phase currents are different. This problem affects unbalance of each phase torque and fluctuation of total torque. This paper proposed each phase current control method of Y connected 7Phase BLDC system. Proposed method is used for PI controller of each phase for each phase current control. This method can perfect square wave current control. Also, configuration of the method is easier than DQ axis transformation. Proposed method is verified through simulation and experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.753-757
• /
• 2004

This paper describes a PC-based distributed multi-rate realtime control system using USB protocol, which is developed as a general motion controller. The control system consists of two control programs: one running at 1 kHz sampling rate on a PC with Linux and another running at 10 kHz sampling rate on a remotely located motion control card called RASID (remote axis serial interface device). Two programs communicates through USB at every 1 msec. A USB communication driver is developed to ensured the 1 msec desired communication time. The main program running on the PC generates reference trajectory at 1 kHz and send it to the RASID through USB and RASIDs located near the motors gather the sensor information and execute the low-level control at 10 kHz. The USB-based connectivity reduces the wiring harness and eventually the manufacturing cost of the machine. The multi-rate nature of the developed system improves the control capability. The effect of sampling rate is analyzed and simulated.

• The Journal of Korean Physical Therapy
• /
• 제13권3호
• /
• pp.751-760
• /
• 2001

Therapeutic exercise had developed with human being. It depend upon development of physiology, anatomy, kinesiology and biomechanics. There are two categories in therapeutic exorcise. One is classical therapeutic exercise which is a activity of one muscle group, one axis and one plane motion. It is ROM, FRE. osteokinematics, arthrokinematics. Another is neurophysiological approach which is multi muscle group, multi axis and plane exercise. It is PNF and Bobath that start from 1940 to early 1950. Classical therapeutic exorcise develop from ROM to osteokinematics and arthrokinematics. It is foundation of the joint mobilization and orthopaedic manual physical therapy. Neurophysiological therapeutic approaching has more theory and skills than before. Bobath methods had changed from reflex-inhibiting posture to key points of control and added the theory of musculoskeletal, biomechanics, motor behaviour and cognition. We call it motor control.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.359-362
• /
• 2009

Optimal efficiency control of synchronous reluctance motor(SynRM) is very important in the sense of energy saving and conservation of natural environment because the efficiency of the SynRM is generally lower than that of other types of AC motors. This paper is proposed a novel efficiency optimization control of SynRM considering iron loss using multi adaptive fuzzy learning controller(AFLC). The optimal current ratio between torque current and exciting current is analytically derived to drive SynRM at maximum efficiency. This paper is proposed an efficiency optimization control for the SynRM which minimizes the copper and iron losses. There exists a variety of combinations of d and q-axis current which provide a specific motor torque. The objective of the efficiency optimization control is to seek a combination of d and q-axis current components, which provides minimum losses at a certain operating point in steady state. The control performance of the proposed controller is evaluated by analysis for various operating conditions. Analysis results are presented to show the validity of the proposed algorithm.