• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.412-412
• /
• 2000

This paper presents a task teaching method for off-line programming of a multi-robot system. Teaching commands were developed in order to simplify a complex teaching process, to shorten the setup time for new working environment and to have flexibility for changes in working environment. Four teaching commands can be used to automatically generate trajectories of an end-effector of the robot in electronics assembly line. The robots used in the work cell are a four-axis SCARA robot and six-axis articulated robot. Each robot is controlled in a independent way while objects, working environment and robots are modeled in corresponding modules, respectively. The off- line programming system developed uses OpenGL for a smooth graphic effect in Window s where three dimensional CAD data can be leaded for graphical modeling.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.248-248
• /
• 2000

본 연구는 조선 소조립, 판넬조립 등의 공정에서 발생되는 필렛 용접 부위의 용접 자동화를 위한 로봇 시스템 개발에 관한 연구이다. 조선등의 중공업 분야에서는 작업이 중량이고 대형임에 따라 로봇이 부재의 특정위치로 이동하여 작업해야 한다. 또한 작업대상의 형상이나 치수가 매번 변경됨에 따라 이에 능동적으로 대처할 수 있어야 한다. 본 연구에서는 두 대의 로봇(2대x6축=12축)이 다축 문형 캔트리(4축)에 장착된 조선용 필렛용접 로봇 시스템(16축)을 개발하였다. 필렛용접부재를 중심으로 두 대의 로봇이 양쪽을 동시에 용접하는 방식으로 고속회전토치를 적용하여 위빙동작없이 원하는 용접각장(Leg Length)을 생성할 수 있다. 캔트리 시스템은 PC 기반의 별도 제어기로 구성하여 두 대의 로봇 제어기와 신호 입출력에 의해 동시동작이 가능하도록 하였으며, 작업장에 놓인 부재의 위치오차를 보장하기 위하여 시각센서를 적용하였다. 용접시작점의 위치보정을 위한 시작점 검출을 위해접촉센서(Touch Sensor)를 적용하였으며, 용접선 추적을 위해서 아크센서(Arc Sensor)를 적용하였다. 본 시스템 2000년 1월 제작 설치가 완료되어 현재 성능 테스트가 완료된 상태로 향후 생산현장에 적용될 계획이다.

• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.114-121
• /
• 1996

This paper presents an useful technique for assessing the volumetric errors in multi-axis machine tools using the kinematic double ball bar. This system has been developed based on the volumetric error map which describes the 3 dimensional errors of machine tools. The developed system inputs the measured radial data of 3 different planes, respectively XY,YZ,ZX, analysing the volumetric errors such as positional. straightness, angle, and squareness errors, etc. The developed system has been tested in a practical machine tool, and showed high potential for the error assessment of multi-axis machine tools.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.25-35
• /
• 1999

This paper presents a control gain tuning scheme for multi-axis PID control systems by Taguchi method. As an experimental set-up, a parallel mechanism machine tool has been selected. This machine has eight servodrives and each servodrive has four control gains, respectively. Therefore, total 32 control gains have to be tuned. Through a series of design of experiments, an optimal and robust set of PID control gains is tuned. The index of the sum of position error and velocity error is reduced to 61.4% after the experimental gain tuning regardless of the feedrate variation.

• 대한안전경영과학회지
• /
• 제6권4호
• /
• pp.171-181
• /
• 2004

A multi axis whetstone polishing system, which uses the flow system of the stone polishing machine head, has been developed. The test results show that the defect by line contact polishing does not occur in both ends of the stone and that it came to trim smoothly. In terms of the surface roughness, the corresponding index was decreased by 3.6 times, improving the polishing effect greatly. It decreased significantly the dust and noise with the wet polishing. The factors of the duty evasion at production site can thus be solved with the work environment improvement against the polishing process of the stone industry and work intensive reduction.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.775-778
• /
• 2002

본 논문에서는 클라이언트 PC상에서 다축 모터를 제어하고 그 상태 데이터들을 모니터링 가능한 임베디드 웹 서버 기반의 다축 제어 시스템을 구성하였다. 하드웨어는 ARM 7312 CPU를 사용한 Nanowit사의 NanoWit2 보드를 사용하였다. 웹 서버는 이 보드에 리눅스 OS를 포팅하고 리눅스 프로그램인 GCC를 사용하여 구현하였다. 모션 컨트롤러는 이모션텍(주)의 MCS-40을 사용하여 웹 서버 보드에서 전송되는 제어 신호를 받아 다축 모터를 구동하고 상태 데이터들을 웹 서버 쪽으로 전송한다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.165-170
• /
• 2004

It used the flow system of the stone polishing machine head and it developed a multi axis whetstone polishing system. With the result, the defect by line contact polishing does not occur in both ends of the stone, and it came to trim smoothly. As the index of the surface roughness decreased to 3.6 times, the polishing effect improved greatly. It decreased greatly the dust and a noise with the wet polishing, and the factors of the duty evasion at production site were solved with the work environment improvement against the polishing process of the stone industry and work intensive reduction.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.169-177
• /
• 1999

The base shear force and the overturning moment are important factors for the earthquake design of a structure. These should be predicted exactly especially when the nonlinear seismic isolation bearings are used against earthquake motions. Generally these are derived by the acceleration responses of a structure with the he assumed masses. However these can be contaminated by the noise in the measured responses and the uncertainty of assumed masses. This paper presents the results of the derived base shear force and overturning moment compared with the measured results by multi-axis load cells. Also discussions are made on the cross-coupling effects of the multi-axis load cell.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권8호
• /
• pp.463-468
• /
• 2004

This paper was applied space harmonic method as a characteristic analysis technique for slotless PMLSM. There is advantages of active response to the change of design parameters as well as reduction of the calculation time. The method can be overcome disadvantages of finite element analysis that needs long times calculation, repetitions of pre and post-process. In this paper, 3D-space harmonic method was applied to consider the precise description of end turn coil shape and the changes of characteristic according to changes of length of z-axis direction. The thrust of optimal design was performed using genetic algorithm to enhance the thrust which is the disadvantage of slotless type PMLSM. For design parameters, width of permanent magnet, width of coil, width of coil inner and lengths of z-axis direction were selected. For objective functions. thrust per weight. thrust per volume. multi-objective function was selected.

• 한국안전학회지
• /
• 제8권1호
• /
• pp.64-70
• /
• 1993

Serious injuries and deaths due to multi-jointed robot occur when a man mispercepts. especially during robot teaching and maintenance work. Since industrial robots often operate with unpredictable motion patterns, establishment of safe speed limit of robot arm is indispensable. An experimental emergency conditions were simulated with a multi-jointed robot. and response characteristics of human operators were measured. The result showed that failure type, robot arm axis. and robot arm speed had significant effects on human reaction time. The reaction time was slightly increased with robot arm speed. though it showed somewhat different pattern owing to failure type. Furthermore the reaction time to the axis which could flex or extend. acting on a workpiece directly. was fastest and its standard deviation was small. The robot arm speed limit securing a‘possible contact zone’based on overrun distance was about 25cm/sec. and in this sense the validity of safe speed limits suggested by many precedent researchers were discussed.