• Cement Symposium
• /
• s.34
• /
• pp.129-137
• /
• 2007

This paper presents a numerical model which can predict degree of cement mineral component, such as $C_3S$, $C_2S$, $C_3A$, $C_4AF$ and microstructure of hydrating cement as a function of water to cement ratio, cement particle size distribution, cement mineral components and temperature. In this model cement particles are parked randomly in cell space and hydration process is described using a multi-component intergrated kinetic model. The simulation result of degree of hydration of cement mineral component agrees well with experiment result. The content of cement hydration product, such as CSH and CH can be obtained as an accompanied result during hydration process. By introducing of equal-area projection method, water withdrawl mechanism and contact area among cement particles can be considered in detail. By using proposed method, pore size distribution of hydrating cement is predicted.

• The KIPS Transactions:PartC
• /
• v.18C no.2
• /
• pp.111-118
• /
• 2011

Recently, with the popularity of smartphones, an interest in multi-networking service through wireless multi-interface of a mobile node is increased. Also, wireless networking technology for using wireless multi-interface has been studied. As the related work, in the IETF Netext WG, the extension of PMIPv6 protocol for multi-interface support is being discussed. Existing PMIPv6 protocol includes the functions for simultaneous access over multi-interfaces of a mobile node and inter-technology handover between multi-interfaces of the mobile node. However, in case of the existing protocol, the problem occurs when inter-technology handover is performed after simultaneous access on the PMIPv6 domain, this problem is the discontinuous of simultaneous connections. Therefore, the PMIPv6 Protocol cannot support flow based multi-homing service. In this paper, as a way to solve the problem, Hybrid Home Network Prefix scheme is proposed.

• Communications of the Korean Mathematical Society
• /
• v.37 no.3
• /
• pp.801-812
• /
• 2022

In this paper, we introduce the multi-derivations on rings and present some examples of such derivations. Then, we unify the system of functional equations defining a multi-derivation to a single formula. Applying a fixed point theorem, we will establish the generalized Hyers-Ulam stability of multi-derivations in Banach module whose upper bounds are controlled by a general function. Moreover, we give some important applications of this result to obtain the known stability outcomes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.201-208
• /
• 2010

The classical iterated hash function is vulnerable to a multi-collision attack. Gauravaram et al. proposed 3C and 3C+ hash functions, in which an accumulation chain is added to usual Merkle-Damgard changing. Their goal is to design composition schemes resistant to generic attacks of Joux's type, but Joscak and Tuma have shown that 3C and 3C+ schemes are not better than Merkle-Damgard scheme in term of security against multi-collision attacks under some mild assumptions. In this dissertation, in order to increase security of 3C hash function, we proposed secure double pipe hash function which was effectively using XOR and XNOR operations per blocks of message. We seek to improve on the work of Lucks in a way. Proposed secure double pipe hash function takes resistance to multi-block collision, fixed point and pre-image attacks.

• Journal of the Korean Ceramic Society
• /
• v.46 no.5
• /
• pp.534-539
• /
• 2009

Reaction Bonded Silicon Carbide(RBSC) has been used for engineering ceramics due to low-temperature fabrication and near-net shape products with excellent structural properties such as thermal shock resistance, corrosion resistance and mechanical strength. Recently, attempts have been made to develop hot gas filter with gradient pore structure by RBSC to overcome weakness of commercial clay-bonded SiC filter such as low fracture toughness and low reliability. In this study a fabrication process of porous RBSC with multi-layer pore structure with gradient pore size was developed. The support layer of the RBSC with multi-layer pore structure was fabricated by conventional Si infiltration process. The intermediate and filter layers consisted of phenolic resin and fine SiC powder were prepared by dip-coating of the support RBSC in slurry of SiC and phenol resin. The temperature of $1550^{\circ}C$ to make Si left in RBSC support layer infiltrate into dip-coated layer to produce SiC by reacting with pyro-carbon from phenol resin.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.2
• /
• pp.197-206
• /
• 2016

Although the Hazen-Williams C factors are very important in the design, operation, and maintenance of water supply pipes, sufficient studies for them have been not reported in korea, which are based on experiments or measured data. Because of this, we have estimated C factors by measurement considering constraints in time precise safety diagnosis for multi-regional water supply system were performed. In this study, we confirmed constraints and variables characteristics of Hazen-Williams equation, and collected reliable C factors data of 174 by measurement, and analyzed their characteristics. According to collected data, the average value is 115.35, which is almost equal to the value of design standard or a little higher than it in korea. Also, among the equations suggested to determine C factor in the past, the C factors calculated by Sharp and Walski equation was closest to them in this study. In addition, to analyze collected C factors, use year and pipe diameter having high correlation with them were respectively divided into there categories. Analysis results showed that C factors evidently decreases depending on increases in use year, on the other hand, size of pipe diameter is proportional to value of them. In conclusion, this research showing evaluation and characteristics for C factors based on measured data will be used as practical reference in determining C factor in multi-regional water supply systems at a later date.

• Journal of the Korea Computer Graphics Society
• /
• v.4 no.1
• /
• pp.67-77
• /
• 1998

In this paper we describe a development of a multi user game using 3D graphics and multicasting. First, we represent a virtual reality world by 3D graphics technology. Next, we use computer communication technology for the purpose of interaction among multi users. As a result, multi users share 3D graphics objects and play games. The goal of this paper is a development of a system that enables multi users to play games sharing a virtual world represented by 3D graphics. We use the OpenInventor library and C++ language for 3D graphics scene representation, and IP multicasting protocols for computer communication. The system allows to use Polhemus Fastrak 3D input device that recognizes the 3D position and 3D orientation. As an example we present a game that demonstrates the effect of piano concert by multi piano players who are distributed in a computer network.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.3E
• /
• pp.95-100
• /
• 2006

The present study presents the design procedures and the acoustic properties of the main hall of Ansan Cultural Arts Center in Korea which has opened in 2004. The acoustic design values are compared with the measured acoustic properties of the completed multi-purpose hall. Acoustic design criteria were suggested in the design stage through the 3-dimentional computer simulations. The acoustic parameters including SPL, RT, C80, $D_{50}$M, RASTI were measured in the hall after completed. Acoustic measurements were carried out in the 40 measurement points using MLS sound source signal in 4 different sound source points. The results show the even distribution of sound levels within the 2.0dB of difference among all seats. The reverberation time of 1.66sec was measured which is similar to the objective value of 1.65 sec in empty states. It was also found that average C80 values lie in the objective extents of C80 from -1 to 3dB and average D50 value of 54 was measured. Thus, it is concluded that the hall can be used as a multi-purpose hall with a suitable acoustic conditions.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.165-169
• /
• 2015

N-propyl-N,N-dimethylethanolamine was directly ultrasonicated in acidic water for 6 minute to give clear stock solutions. The catalytic hydrolysis of N-propyl-N,N-dimethylethanolamine was studied at $30{\sim}55^{\circ}C$ in the presence of uni-lamellar vesicle and mixture of uni- and multi-lamellar aggregates. The difference of rate between uni- and mixture was observed, where uni-lamellar reaction was more catalytic effect. The phase transition temperature of vesicle was $37{\sim}44^{\circ}C$. The particle size of multi-lamellar than that of uni-lamellar of biological membrane was measured more largely.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.837-844
• /
• 2019

In this paper, we propose the AMBM(: Adaptive Multi-channel Backoff Machisum) -Mac protocol to provide high throughput for non-safety applications in VANET(: Vehicular Ad Hoc Networks) environment. The proposed protocol guarantees the quality of service of non-safety packets by dynamically adjusting CW(: Channel Window) of WSA(: WAVE Service Advertisement) to maximize throughput between non-safety packets of different priority. It also shows that allocating a large amount of time for channel coordination and time slot reservation for SC and dynamically adjusting CW and CCI as nodes increase to reduces transmission delay than IEEE 1609.9, C-MAC(: Coordinated multi-channel MAC, and Q-VCI(: QoS Variable CCH Interval) protocols.