• 제목/요약/키워드: Multi zone

검색결과 540건 처리시간 0.029초

다단연소기를 이용한 저 NOx 연소특성 연구 (An Experiment on Low NOx Combustion Characteristics in a Multi-Staged Burner)

  • 조은성;성용진;정석호
    • 대한기계학회논문집B
    • /
    • 제27권1호
    • /
    • pp.32-38
    • /
    • 2003
  • Staged combustion, such as air- and fuel-staging, is a relatively well-known technique fur reduction of NOx emission and used in combination with other techniques nowadays. However, the design variables are still selected depending upon operating conditions. There are many variables tested to investigate the NOx emission characteristics fur changing of fuel or air velocity, swirl intensity, and staging ratio of air and fuel in multi-staged burner. In air-staging case, the fuel-rich condition of the primary combustion zone is very helpful to reduce NOx emission and its range is known to be restricted by the increase of carbon monoxide. However, in many cases carbon monoxide level is not too high to be restricted operating condition. So we tried to expand the equivalence ratio range to the richer condition in the primary combustion zone and certificate the function of each burner component and its contribution to the overall NOx production.

새만금 간척지 토양특성과 친환경 활용 방안 (Construction of Environmental-friendly Infrastructure in Saemangeum Reclaimed Land)

  • 서동욱;전건영;김현태;송재도
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회
    • /
    • pp.40-48
    • /
    • 2010
  • Saemangeum reclaimed area is needed to construct much green zone to make high-quality multi-functional land such as tide embankment, lake dike, industrial complex, environmental spaces, etc. However, growth of plants is somewhat difficult because a salinity of Saemangeum soil is very high and a soil fertility, water content of soil are low. Therefore, it is essential to initial desalination of soil and continuous management for planting base. It is recommended that a group of grassland to raise the efficiency of covering should be made in the first stage and a forest by improvement of vegetation should be made in the mid and long term stage. It is recommended that the construction of vegetation base should be made with a regular thickness of soil of good quality in multi-functional area such as a shrub and wood. In case of construction of a windbreak forest, it is necessary to make a wood base of suitable depth using soil brought from another place or filling of soil. Also, it is necessary to keep a maintenance of woods in early stage. Saemangeum reclaimed land will be brand-named worldwide tourist attractions due to construction of much green zone having high quality multi-functional facilities.

  • PDF

신경망 최적화 기법을 이용한 다익 홴/스크롤 시스템의 설부에 대한 형상 최적화 (Shape Optimization of Cut-Off in a Multi-blade Fan/Scroll System Using Neural Network)

  • 한석영;맹주성;유달현;진경욱
    • 대한기계학회논문집B
    • /
    • 제26권10호
    • /
    • pp.1341-1347
    • /
    • 2002
  • In order to improve efficiency of a system with three-dimensional flow characteristics, this paper presents a new method that overcomes three-dimensional effects by using two-dimensional CFD and neural network. The method was applied to shape optimization of cut-off in a multi-blade fan/scroll system. As the entrance conditions of two-dimensional CFD, the experimental values at the positions out of the inactive zone were used. The distributions of velocity and pressure obtained by two-dimensional CFD were compared with those of three-dimensional CFD and experimental results. It was found that the distributions of velocity and pressure have qualitative similarity. The results of two-dimensional CFD were used for teaming as target values of neural network. The optimal angle and radius of cut-off were determined as 71$^{\circ}$and 0.092 times the outer diameter of impeller, respectively. It is quantified in the previous report that the optimal angle and radius of cut-off are approximately 72$^{\circ}$and 0.08 times the outer diameter of impeller, respectively.

반응표면법을 이용한 다익 홴/스크롤 시스템의 설부에 대한 형상 최적화 (Shape Optimization of Cut-Off in a Multi-blade Fan/Scroll System Using Response Surface Method)

  • 한석영;맹주성;황영민
    • 한국자동차공학회논문집
    • /
    • 제11권1호
    • /
    • pp.225-231
    • /
    • 2003
  • In order to improve efficiency of a system with three-dimensional flow characteristics, this paper presents a new method that overcomes three-dimensional effects by using two-dimensional CFD and response surface method. The method was applied to shape optimization of cut-off in a multi-blade fan/scroll system. As the entrance conditions of two-dimensional CFD, the experimental values at the positions out of the inactive zone were used. In order to examine the validity of the two-dimensional CFD the distributions of velocity and pressure obtained by two-dimensional CFD were compared with those of three-dimensional CFD and experimental results. It was found that the distributions of velocity and pressure show qualitatively similarity. The results of two-dimensional CFD were used for constructing the objective function with design variables using response surface method. The optimal angle and radius of cut-off were determined as $72.4^{\circ}$ and 0.092 times the outer diameter of impeller, respectively. It is quantified the previous report that the optimal angle and radius of cut-off are approximately $72^{\circ}$ and 0.08 times the outer diameter of impeller, respectively.

BCP 전자수송층 두께가 백색 OLED의 효율 및 발광 특성에 미치는 영향 (Effects of BCP Electron Transport Layer Thickness on the Efficiency and Emission Characteristics of White Organic Light-Emitting Diodes)

  • 서유석;문대규
    • 한국전기전자재료학회논문지
    • /
    • 제27권1호
    • /
    • pp.45-49
    • /
    • 2014
  • We have fabricated white organic light-emitting diodes (OLEDs) using several thicknesses of electron-transport layer. The multi-emission layer structure doped with red and blue phosphorescent guest emitters was used for achieving white emission. 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) was used as an electron-transport layer. The thickness of BCP layer was varied to be 20, 55, and 120 nm. The current efficiency, emission and recombination characteristics of multi-layer white OLEDs were investigated. The BCP layer thickness variation results in the shift of emission spectrum due to the recombination zone shift. As the BCP layer thickness increases, the recombination zone shifts toward the electron-transport layer/emission-layer interface. The white OLED with a 55 nm thick BCP layer exhibited a maximum current efficiency of 40.9 cd/A.

실간환기량 측정을 위한 멀티추적가스법의 검증실험 (An Experiment on Verification of Multi-Gas Tracer Technique for Air Exchange Rate Between Rooms)

  • 한화택;조석효
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2007년도 동계학술발표대회 논문집
    • /
    • pp.99-104
    • /
    • 2007
  • Tracer gas technique is widely used to measure the ventilation rates and/or ventilation effectiveness of building spaces. However, the conventional method using a single tracer gas can measure only outdoor air change rates in a single zone. This paper deals with the multi-gas tracer technique to measure air exchange rates between rooms. Interzonal air movements are important to characterize overall ventilation performance of complicated multi-zone buildings. Experiments are conducted in a simple two-room model with known airflow rates using tracer gases of SF6 and R134a. The concentration decays of two tracer gases are measured after simultaneous injections in each room. The governing equations are derived from the continuity and the mass balance of each room. The data reduction procedure are developed to obtain the inter-room airflow rates using the governing matrix inversion, and various data manipulation methods are tested, such as data shift, interpolation, smoothing, and etc, to improve the estimate and interpretation of the results.

  • PDF

ASAR AP 다중편파 및 MULTI-LOOK 에 의한 선박탐지 연구 (SHIP DETECTION APPROACH BASED ON CROSSCORRELATION FROM DUAL-POLARIZATION DATA)

  • Yang, Chan-Su;Ouchi, Kazuo
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2008년도 춘계학술대회 논문집
    • /
    • pp.180-184
    • /
    • 2008
  • Preliminary results are reported on ship detection using coherence images computed from crosscorrelating images of multi-look-processed dual-polarization data (HH and HV) of ENVISAT ASAR. The traditional techniques of ship detection by radars such as CFAR (Constant False Alarm Rate) rely on the amplitude data, and therefore the detection tends to become difficult when the amplitudes of ships images are at similar level as the mean amplitude of surrounding sea clutter. The proposed method utilizes the property that the multi-look images of ships are correlated with each other. Because the inter-look images of sea surface are covered by uncorrelated speckle, crosscorrelation of multi-look images yields the different degrees of coherence between the images and water. The polarimetric information of ships, land and intertidal zone are first compared based on the cross-correlation between HH and HV. In the next step, we examine the technique when the dual-polarization data are split into two multi-look images.

  • PDF

시차장벽식 무안경 다시점 입체디스플레이 시스템에서 수평방향의 시점 수 저하 없이 깊이방향의 자유도를 증가시키기 위한 혁신적 방법 (Innovative Method to Expand a Degree of Freedom of Observation in the Depth Direction without Losses of the Horizontal Number of Views in Autostereoscopic Multi-Views 3D Display System)

  • 이광훈;박민철
    • 한국통신학회논문지
    • /
    • 제38C권10호
    • /
    • pp.903-910
    • /
    • 2013
  • 무안경방식 스테레오스코픽 3D 디스플레이 시스템은 수평, 깊이방향에 대한 관찰자유도가 안경방식에 비해 매우 좁다. 본 논문에서는 분할된 3중의 기울어진 시차장벽(TS-SPB)을 사용하여 무안경방식에서 수평방향의 시점수를 유지하면서도 깊이방향의 시역폭을 증가시키는 혁신적인 방법을 제안한다. 본 논의의 당위성은 실제와 유사한 환경에서의 전산모사를 통하여 검증되었다. 결과적으로 색분산이 없는 수평방향의 가용 최대 시점수는 $2^n$이며, 깊이방향의 시역폭은 단일 시차장벽(SPB)의 경우와 비교하여 3.36배 증가하였다.

자연보전권역 관련 제도개선 우선순위에 관한 연구 (Priority for the Improvement on Natural Conservation Zone system)

  • 이윤상;안현;이미홍
    • 토지주택연구
    • /
    • 제10권2호
    • /
    • pp.1-13
    • /
    • 2019
  • This study suggests that the system improvement priority of the Natural Conservation Zone of the Metropolitan Area Maintenance Planning Law, which was enacted for about 37 years. First of all, through the precedent research and the consultation meeting, the improvement plan was divided into the short term and the mid(or long) term. Important findings and implications are as follows. The short-term priority results were 'Improve water quality regulation', 'Strengthen individual location regulations of factories and induce multi-use plan position', and 'Improvement of waterfront area regulation', which were both critical and urgent. The mid-term(or Long-term) priority results were 'To integrate development and environmental duplication regulations', 'Abolition and unification of environmental laws', and 'Adjustment and resetting of natural conservation areas', which were both critical and urgent. On the other hand, 76.4% of the residents and 64.5% of the experts are concerned about the necessity of improvement of the Natural Conservation Zone system. Both residents and experts seem to be aware of the necessity. Opinions about Improvement and mitigation of regulations on Natural Conservation Zone that were constantly raised. In the past, there was a temporary and fragmented institutional mitigation of the government. However, with the rapid development of eco-friendly technologies since 2010, Our Country Conditions is in a transition period. This study has significant implications for the improvement and mitigation of metropolitan area regulations.