• Title/Summary/Keyword: Multi zone

Search Result 540, Processing Time 0.03 seconds

Consolidation Analysis of Soft Clay by Using Modified Consolidation Theory (수정압밀이론을 이용한 연약지반의 압밀해석)

  • Kim, Soo Il;Lee, Jun Hwan;Lee, Seung Rae;Jeong, Sang Seom
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.14 no.3
    • /
    • pp.565-572
    • /
    • 1994
  • Consolidation behavior on soft clay was investigated by using one- and two-dimensional analysis based on original and modified one dimensional consolidation theory. For the analytical model, the embankment was simulated by applying single- or multi-surcharge loading to the surface of soft clay. Based on the results obtained, it was found that the predicted settlement by one dimensional consolidation theory was most of the time higher than the observed one at the mid- and especially lateral-zone of embankment. When compared with two dimensional analysis, the result of modified one dimensional consolidation analysis showed almost similar trend to the observed one. There fore even in case where proper selection of soil parameters, one dimensional consolidation theory like as modified one dimensional consolidation theory could be suggested due to its convenience.

  • PDF

Numerical Simulations of Rip Currents Under Phase-Resolved Directional Random Wave Conditions (위상을 포함한 다방향 불규칙파 조건에서의 이안류 수치모의)

  • Choi, Junwoo
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.27 no.4
    • /
    • pp.238-245
    • /
    • 2015
  • Recently, Choi et al.(2015) showed that a numerical simulation of the SandyDuck experiment under a directional random wave environment agreed well with the experimental data including the wave height distribution of the random waves, the well-developed longshore current and its energetic fluctuation. Based on the Boussinesq modeling, this study investigates the effect of the alongshore variations, which are induced by not only the field topography but also the phase interaction of multidirectional random waves in the surf zone wave field, on the rip currents. As a result, transient rip currents as well as topographical rip currents cause the complicated surfzone circulation and mixing process due to their interactions in a multi-directional random wave condition while the topographical rip currents are dominant in a monochromatic wave condition.

Strain Analysis of Crust at the Stabilization Stage Using and Applied Statistical Analysis

  • Kim, Hyeong-Sin;Yun, Hyun-Seok;Chae, Byung-Gon;Choi, Jung-Hae;Seo, Yong-Seok
    • The Journal of Engineering Geology
    • /
    • v.25 no.1
    • /
    • pp.9-20
    • /
    • 2015
  • A strainmeter goes through a period of instability immediately after installation. To determine the stability of strainmeters installed around the Andong fault zone, South Korea, an x-MR control chart analysis and a T2 control chart analysis were conducted. The x-MR control chart analysis used an empirically determined 3σ control limit line to identify abnormal data in recently installed strain gauges. In the T2 control chart analysis, the control limit line was set at a confidence of 95%. A comparison of the early stage of measurement with the terminal stage of measurement for three months after installation indicates that stabilization depends on the location and direction of each strain gauge in x-MR control chart analysis. In the T2 control chart analysis, the number of values exceeding the control limit line decreased as the terminal stage was approached. Based on these results, it is suggested that the 3σ control limit line of an x-MR control chart can be used as a standard for single gauge stability, and that the 95% confidence limit of a T2 control chart analysis could be used as the standard for the stability of multi-gauge strainmeters.

Indoor air quality and ventilation requirement in residential buildings: A case study of Tehran, Iran

  • Ataei, Abtin;Nowrouzi, Ali;Choi, Jun-Ki
    • Advances in environmental research
    • /
    • v.4 no.3
    • /
    • pp.143-153
    • /
    • 2015
  • The ventilation system is a key device to ensure both healthful indoor air quality (IAQ) and thermal comfort in buildings. The ventilation system should make the IAQ meet the standards such as ASHRAE 62. This study deals with a new approach to modeling the ventilation and IAQ requirement in residential buildings. In that approach, Elite software is used to calculate the air supply volume, and CONTAM model as a multi-zone and contaminant dispersal model is employed to estimate the contaminants' concentrations. Amongst various contaminants existing in the residential buildings, two main contaminates of carbon dioxide ($CO_2$) and carbon monoxide (CO) were considered. CO and $CO_2$ are generated mainly from combustion sources such as gas cooking and heating oven. In addition to the mentioned sources, $CO_2$ is generated from occupants' respirations. To show how that approach works, a sample house with the area of $80m^2$ located in Tehran was considered as an illustrative case study. The results showed that $CO_2$ concentration in the winter was higher than the acceptable level. Therefore, the air change rate (ACH) of 4.2 was required to lower the $CO_2$ concentration below the air quality threshold in the living room, and in the bedrooms, the rate of ventilation volume should be 11.2 ACH.

An Analysis on Influences of Seasonal and Tidal Changes to Outfall Design and Management (조석이 방류관의 설계 및 운영에 미치는 영향 분석)

  • Kim, Ji-Yeon;Lee, Joong-Woo
    • Journal of Navigation and Port Research
    • /
    • v.28 no.3
    • /
    • pp.259-268
    • /
    • 2004
  • For the last years, it has become hot issue such as disposal of the treated wastewater, which caused by increment of a population and industrial development at the coastal areas. The ocean outfall system discharges primary or secondary treated effluent into coastline or at the deep water, or between these two. The effluent, which has a density similar to that of fresh water, rises to the see, surface forming plume or jet, together with entraining the surrounding salt water and becomes very dilute. This paper deals ocean outfall design which effects to decision-making about marine environment management and wastewater treatment. In order to make predictions of dilution of discharged water and the trajectory of a plume, CORMIX has been used considering several elements including a seasonal and tidal changes. These solutions are strung together to provide basic data and general drawings for effective management of outfall.

Numerical Simulation of Tsunamis that Affected the Coastal Zone of East Sea (동해연안에 영향을 미친 지진해일의 수치시뮬레이션)

  • Kim, Do-Sam;Kim, Ji-Min;Lee, Kwang-Ho
    • Journal of Ocean Engineering and Technology
    • /
    • v.21 no.6
    • /
    • pp.72-80
    • /
    • 2007
  • The tsunami that resulted from the Central East sea Earthquake, which registered 7.7 on the Richter scale, that occurred over the entire water region in Akita on May. 26, 1983 and the tsunami that was triggered by the Southwest off Hokkaido Earthquake (7.8 on the Richter scale) that occurred in Southwest off Hokkaido on July 12, 1993 are representative cases that led to considerable damage in life and property, not only in Japan but also in Korea. In this study, multi-grid method was used in order to reproduce sufficiently the shoaling effect that occurs as water depth becomes shallow in the shallow water region and moving boundary condition was introduced to consider the runup in the coastal region. For the tsunamis that exerted considerable effect on the East Sea coast of Korea that were caused by the Central East Sea Earthquake in 1983 and the Southwest off Hokkaido Earthquake in 1993, characteristics like water level rise and propagation in the East Sea coast will be examined using numerical simulations. At the same time, these values will be compared with observed values. In addition, maximum water level rise and change in the water level with respect to time that were caused by the tsunamis were examined at each location along the East sea coast. Usefulness of numerical analysis was verified by comparing with observed values.

A Study on the Consolidation Settlement Due to the Vertical Drain Method by the Implicit Finite Difference Scheme (음적차분해석법을 이용한 연직배수 공법에 의한 압밀침하에 관한 연구)

  • Park, Sung Zae;Jung, Du Hwoe;Jeong, Gyeong Hwan;Lee, Kyeong Joon
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.14 no.5
    • /
    • pp.1243-1251
    • /
    • 1994
  • The implicit finite difference program was developed to evaluate the relationship between time and consolidation ratio within the zone of vertical drain effective radius. In the evaluation, the excess pore water pressure was considered to dissipate in two directions, namely, vertical and radial flow direction. To calculate subsoil stress increments in the soil due to multi-step embanking, the foundation soil was assumed to be an isotropic and homogeneous elastic medium and the initial excess pore water pressure was estimated by using Skempton's parameters whose condition is plane strain and elastic phase of pore pressure response within the soft ground. Regarding to the settlement estimation, immediate and primary consolidation settlements were calculated. The secondary or delayed consolidation settlement was not considered. Numerically calculated excess pore water pressure and settlements were similar to the measured data in situ. Thus, this method can be used to predict the time-consolidation ratio of each layer treated by vertical drain method.

  • PDF

Flow Structure Around a Rectangular Prism Placed in a Thick Turbulent Boundary Layer (두꺼운 난류경계층 내부에 놓인 직사각형 프리즘 주위의 유동구조)

  • Kim, Gyeong-Cheon;Ji, Ho-Seong;Chu, Jae-Min;Lee, Seok-Ho;Seong, Seung-Hak
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.26 no.4
    • /
    • pp.578-586
    • /
    • 2002
  • Flow structures around a rectangular prism have been investigated by using a PIV(Particle Image Velocimetry) technique. A thick turbulent boundary layer was generated by using spires arid roughness elements. The boundary layer thickness, displacement thickness and momentum thickness were 650mm, 117.4mm and 78mm, respectively. The ratio between the model height(40mm) and the boundary layer thickness H/$\delta$, was 0.06. The Reynolds number based on the free stream velocity and the height of the model was 7.9$\times$10$^3$. The PIV measurements were performed at three different wall normal planes. Three recirculation regions at forward facing step, top of the roof and backward facing step are clearly seen and show three dimensional features. Dramatic changes of flow patterns are observed in the wake regions in the different spanwise wall normal planes. Instead of reattachment and recirculation zone, rising streamlines are depicted at the normal planes near the side wall due to the interaction with a rising horse shoe vortex. The peak of turbulent kinetic energy occurs at the separation bubble on top of the roof and the magnitude is 2.5 times higher compared with that of the wake region.

Coastal Remote Sensing in Korea (한국의 연안원격탐사 활용)

  • Ryu, Joo-Hyung;Hong, Sang-Hoon;Jo, Young-Heon;Kim, Duk-jin
    • Korean Journal of Remote Sensing
    • /
    • v.36 no.2_2
    • /
    • pp.231-236
    • /
    • 2020
  • Recently, great attention for environment changes of coastal regions due to climate change by the global warming has been raised. In addition, coastal environments which are very useful resources has been impacted by anthropogenic activities such as urbanization or fishery, etc. In situ measurements and remote sensing application using various platforms equipped by payloads with very diverse spectral resolution has been conducted to protect and reconstruct invaluable coastal region. In this special issue, several studies showing very interesting results of the coastal remote sensing in Korea. This special issue contains the research activities over the coastal regions in Korea has been performed by the KIOST Korea Ocean Satellite Center and academic organizations. We hope to share useful information on the various domestic coastal remote exploration activities and to contribute to develop scientific research to protect our invaluable coastal environment.

A Study on the complementary elements between department-store interior design and architectural planning (백화점의 실내디자인과 건축계획의 상호보완요소에 관한 연구)

  • 박의정;강철민
    • Proceedings of the Korean Institute of Interior Design Conference
    • /
    • 1999.04a
    • /
    • pp.37-44
    • /
    • 1999
  • A number of the retail and traditional market customer is decrease, whereas that of the supermarket in department-store customers in is increase. This case suggests that customers have a preference for much more comfortable and pleasant shopping places And making a resonable purchase in the supermarkets where we can find various goods and price zone, is now garden variety. It is a current course that once the manager ask an architect for multi-functional space design in department-store and then the architect compose a team and start to design. Of course, the team of planner thinking manage give the design team the basic material data such as commerce analysis and the use of each layer in the department store but, the design team solve the assignment by architectural form, functional space plan and the limited architecture law. After establishing general design for architecture, we can ask shopping-mall distribution, products display and interior design of the interior design general design for architecture, we can ask shopping-mall distribution, products display and interior design of the interior design team. so it is inevitable that the interior design team concerning M·D can find lots of complementary factors with architecture design. The purpose of this study is analyzing the differences of architecture design, which has to accept the limited law and interior design concerning M·D, satisfying the structure and the law in the future design for the department-store. Also the purpose of this thesis is suggestion the items architects and interior designers research into together to make the inner space ideally.

  • PDF