• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.8
• /
• pp.2039-2052
• /
• 1994

In this study, an expert system for multi-stage cold forging process design of axisymmetric parts is developed. The available geometries are axisymmetric shape and cylinder with a hold in one end. The overall system is composed of knowledge-based system for process sequence design, output module interfaced with CAD system and material data-base. In the developed system, designed process can be modified in order to reduce the number of processes and make the distribution of forming load be almost equal at various deforming stages within the machine capacity. After process sequence design is completed, results can be stored as a text file or a commercial CAD system file. The capabilities of the developed system are illustrated through various examples of process design.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.181-184
• /
• 2005

Operating conditions of photovoltaic power generator is very sensitive to the PV modules. The PV module's control is an importance issue in the removing DC ripple noise. In this paper, the phase-shifted-carrier technique, which is a new three-step dc-dc power multi-converter schemes, is applied to solar generator system to improve the output current waveform. The novel type of three-step dc-dc converter presented has many features such as the good output waveform, high efficiency, low switching losses, low acoustic noise. The circuit configuration is constructed by the conventional full-bridge type converter circuit using the isolated DC power supply for which the solar cell is very suitable. In the end, a circuit design for understanding three-step dc-dc converter and new solar power system were presented

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.748-755
• /
• 2009

This paper proposes a 18-step back-to-back voltage source converter using four sets of 3-Level converter module with auxiliary circuit to increase the number of steps. The proposed back-to-back voltage source converter has an independent control capability of active power and reactive power at the interconnected ac system. The operational feasibility of proposed system was verified through computer simulations with PSCAD/EMTDC software. The feasibility of hardware implementation was verified through experimental results with a scaled hardware model. The proposed back-to-back converter can be widely applied for interconnecting the renewable energy source to the power grid.

• IE interfaces
• /
• v.13 no.3
• /
• pp.438-443
• /
• 2000

In this paper, we suggest a new backorder policy for stockout which is occurred in each regional distribution centers of distribution chain for capital-goods product. In backorder process of backorder policy, minimize expected stockout through the balancing-division module, and has occured stockout is backordering through the emergency supply from central distribution center and regional distribution center. Simulation tests show that our backorder policy is on the decrease of backorder cost and improvement of customer service. Our backorder policy has two important benefit. First, customer service level is improved by realization of minimum stockout. Second, the backorder process by allowance of the same level supply is to decrease system operating cost.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.147-149
• /
• 2007

This paper presents design results of anultra-small actuator for auto focus or optical zoom function of mobile phone cameras. The consideration of the actuator is tubular type having a large hole in its center to arrange some optical lenses. The stator consists of 3-phase windings, and the mover is designed to an Nd injection permanent magnet(PM) which magnetized with multi-pole polar pattern. From the numerical analysis that taking into account the magnetizing pattern of the PM, the thrust of the designed actuator is about 40mN with the outer diameter of 7mm.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.177-183
• /
• 2004

The out-of-positioned small female drivers are most likely to be injured during airbag deployment due to their stature and proximity to the steering wheel and airbag module. In order to investigate the injury mechanisms, some experimental studies with Hybrid III 5% female dummy and with female cadavers could be found from the open literatures. However, the given information from those experimental studies is quite limited to the standard conditions and might not be enough to estimate the airbag inflation aggressiveness regarding on the occupant responses and injury. In this study, a finite element analysis has been performed in order to investigate the airbag-induced injuries. A finite element 5% female human model in anatomical details has been developed. The validation results of the model are also introduced in this paper.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.4
• /
• pp.1-11
• /
• 2008

This research presents a study for the knowledge-based configuration design development of a RC (remote control) helicopter. Parametric design and knowledge based design concepts are introduced for rapid design changes and analyses using commercial CAD software, CATIA(R) Knowledgeware module. It is crucial for RC helicopter design because it enables rapid conceptual design through instant configuration changes. Positions and dimensions of RC helicopter parts were used as design parameters. As an example, positions of CG(center of gravity) points were traced and plotted as the configuration changes. Further research should be performed in areas of user interfaces and web-based multi-user environments instead of using Excel data sheets.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.7
• /
• pp.1288-1293
• /
• 2007

In this paper, a compact triplexer has been implemented for Cellular/GPS/USPCS applications. In order to realize the proposed triplexer, we use a low-temperature co-fired ceramic (LTCC) substrate to enable a fully compact integrated module using a multi-layer high-density architecture, and conjugate-match the channels instead of the open matching technique. The three dimensional design capability of LTCC substrates can reduce the overall size of the triplexer, resulting in dimensions on the order of $3.2\;mm\;{\times}\;2.5\;mm\;{\times}\;1\;mm$. The measured result shows that the triplexer has, in Cellular/GPS/USPCS bands, the insertion loss of less than 0.5dB, less than 1.7dB, and less than 0.9dB in order. Also, the triplexer has an isolation of more than 15dB in the cellular and USPCS bands and an isolation of more than 20dB in the GPS band.

• The Journal of Korea Robotics Society
• /
• v.9 no.4
• /
• pp.264-271
• /
• 2014

In this study, we have developed the humanoid joint modules which provide a variety of service while living with people in the future home life. The most important requirement is ensuring the safety for humans of the robot system for collaboration with people and providing physical service in dynamic changing environment. Therefore we should construct the mechanism and control system that each joint of the robot should response sensitively and rapidly to fulfill that. In this study, we have analyzed the characteristic of the joint which based on the target constituting the humanoid motion, developed the optimal actuator system which can be controlled based on each joint characteristic, and developed the control system which can control an multi-joint system at a high speed. In particular, in the design of the joint, we have defined back-drivability at the safety perspective and developed an actuator unit to maximize. Therefore we establish a foundation element technology for future commercialization of intelligent service robots.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06d
• /
• pp.172-176
• /
• 2007

유통분야에서 물품관리를 위해 사용되었던 바코드를 대체할 차세대 인식기술로 꼽히는 RFID 기술은 IT기술의 주요 시장으로 부상하면서 다양한 연구가 이루어지고 있는 분야이다. 유통 및 물류분야에서는 다량의 물품을 실시간으로 식별해야 하는 경우가 필요한데 이를 위해 여러 개의 리더가 동시에 사용 된다. RFID 시스템을 구축하는데 있어서 다중 리더 운영 기법은 전체 RFID 시스템의 성능을 좌우한다. EPCglobal에서 제안 된 Gen2 프로토콜은 900MHz 대역의 단일 통합 표준으로서 ISO/IEC 18000-6 C타입으로 채택되었다. 하지만 Gen2 프로토콜에서 다중 리더 운영 정책에 대해서 Session 기능을 간단히 내놓았을 뿐 자세한 소프트웨어 응용법을 제시하지 않았으며, 이에 관한 미들웨어 연구도 이루어지고 있지 않다. 본 논문에서는 현재 Gen2 프로토콜에서의 태그 인식 기술과 EPCglobal에서 제안하는 RFID 프로토콜, Sesssion 개념을 소개하고 Gen2 프로토콜을 이용하는 RFID 시스템에 다중 리더 관리 모듈을 설계를 통해 다중 리더를 운영하는 기법을 제안한다.