• 대한산업공학회지
• /
• 제41권2호
• /
• pp.209-219
• /
• 2015

This paper deals with a case study about productivity improvement in medium and small-sized manufacturing factories. It is popular to improve the productivity of lines by shortening the production cycles and assigning multi jobs to workers. We analyze the production lines and improve the productivity in the case study through multi-functional workers and shortened production lines. Based on the case study, we propose some guidelines to improve the productivity of production lines.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.154-161
• /
• 2014

To study and locate partial discharge(PD) and analyze the transient state of power transformer, there is a need for a high frequency model of transformer winding and calculation of its parameters. Due to the high frequency nature of partial discharge phenomenon, there is a need for an accurate model for this frequency range. To attain this goal, a Multi-Conductor Transmission Line (MTL) model is used in this paper for modeling this transformer winding. In order that the MTL model can properly simulate the transformer behavior within a frequency range it is required that its parameters be accurately calculated. In this paper, all the basic parameters of this model are calculated by the use of Finite Element Method (FEM) for a 20kV winding of a distribution transformer. The comparison of the results obtained from this model with the obtained shape of the waves by the application of PD pulse to the winding in laboratory environment shows the validity and accuracy of this model.

• Plant Resources
• /
• 제4권1호
• /
• pp.31-35
• /
• 2001

Major characteristics of new Waesungri maize inbred line has multi-tiller and ears: five to six tillers and seven to eight ears per plant and flowering date of Waesungri was delayed about 18 and 24 days compared to Mo17 U.S line and IK$_4$ Korean local lines, respectively. Number of ears, fresh and dry weight per plant were significantly different among all tested hybrids including Waesungri/Sinkihong hybrid under different planting times and densities. Especially, both fresh and dry weight of IK$_1$/FR140//Waesungri F$_1$hybrid were significantly higher at high planting density. In kernel weight per unit area, Wnesungri/Sinkihong hybrid was high at high density and IK$_1$/FR140//Waesungri hybrid was high at low planting density. As results of analysis of variance, flowering date was shown a significantly different both planting times and varieties, while other characters including stem height were shown very variable in interactions with enviromental factors.

• 대한조선학회논문집
• /
• 제39권2호
• /
• pp.69-80
• /
• 2002

선박의 곡외판은 냉간가공과 열간가공(선상가열) 과정을 거쳐 제작된다. 선상가열의 자동화 및 기계화에 대한 연구가 다양하게 수행되어 오고 있다. 특히 가열조건과 잔류 변형 사이의 관계규명은 자동화 및 기계화를 위한 주요 요소로 생각된다. 본 연구는 그러한 관계를 규명하기 위하여 일련의 체계적인 과정을 제시하고 관계식을 제안하였다. 선상가열에 의한 변형은 3차원 열탄소성 변형현상으로 정식화될 수 있으며, 열탄소성 변형현상을 유한요소해석을 이용하여 다양한 가열조건에 대한 수치해석을 수행하였다. 유한요소법의 유용성을 검증하기 위하여 실험을 수행하였고 그 유용성을 확인하였다 변형관계식에 사용된 입력변수는 차원해석을 통하여 선정하였다. 유한요소법을 이용하여 얻어진 결과를 활용하여 선상가열에 의한 변형관계식을 추정하기 위하여 다변수해석과 다차원 보관과정을 예시하였다. 일련의 과정을 통하여 본 연구는 선상가열의 가열조건과 잔류 변형 사이의 관계식을 선정하기 위한 방법을 제안하였다.

• 대한토목학회논문집
• /
• 제43권4호
• /
• pp.525-533
• /
• 2023

산지가 많은 부산시의 지형적 특성상 가용토지가 부족한 상황에서 경부선 철도까지 도심을 가로지르고 있어 생활권의 단절과 도심발전을 저해하고 있다. 이에 토지 확보를 위하여 입체개발의 필요성이 제기되고 있으며, 최근에는 경부선 철도의 지하화로 양분화 된 도시를 연결하고 토지를 효율적으로 사용할 수 있도록 하는데 관심이 증가하고 있다. 본 연구에서는 토지의 입체개발의 사례를 통해 개발유형을 분석하고, 부산시내 경부선 철도의 지하화 사업 시 메인이 되는 4개 권역(사상역, 구포역, 가야역, 부산진역)의 입체개발로 발생하는 가용토지에 효과적인 활용을 위한 시민인식조사 결과를 바탕으로 입체개발 유형별 개발방향 설정하였다. 또한 대상지 지역이 가지고 있는 지역적 특성과 현재 진행되고 있는 도시재생사업을 반영하여 철도에 의해 양분된 지역생활권의 단절 해소 및 철도시설 부지의 효율적 토지이용을 통한 입체적인 개발을 통해 철도 부지의 수평적, 수직적 공간활용의 설계방안을 제시하고자 한다.

• Journal of Power Electronics
• /
• 제10권1호
• /
• pp.85-90
• /
• 2010

In this paper the effects of a Static Synchronous Series Compensator, which is constructed with a 48-pulse inverter, on the power demand from the grid are studied. Extensive simulation studies were carried out in the MATLAB simulation environment to observe the compensation achieved by the SSSC and its effects on the line voltage, line current, phase angle and real/reactive power. The designed device is simulated in a power system which is comprised of a three phase power source, a transmission line, line inductance and load. The system parameters such as line voltage, line current, reactive power Q and real power P transmissions are observed both when the SSSC is connected to and disconnected from the power system. The motivation for modeling a SSSC from a multi-pulse inverter is to enhance the voltage waveform of the device and this is observed in the total harmonic distortion (THD) analysis performed at the end of the paper. According to the results, the power flow and phase angle can be controlled successfully by the new device through voltage injection. Finally a THD analysis is performed to see the harmonics content. The effect on the quality of the line voltage and current is acceptable according to international standards.

• 한국산업보건학회지
• /
• 제15권3호
• /
• pp.277-281
• /
• 2005

Air-line mask is an important personal protective equipment for workers working under hazardous surroundings in which a fixed ventilation system is difficult to be installed. If the air-line mask make loud noise, works wearing the mask may be faced with health problems such as noise induced hearing loss(NIHL). The purpose of this study is to introduce a low noisy technology for workers using air-line mask. A traditional type air-line has been improved to an advanced air-line mask with lesser noise. In the mask, air suppling conduits consists of multi tubes are placed inside of the front of the safety helmet. The noise level reduced from 80dB(A) to less than 80dB(A) when measured by KS A 0701 method at Center for Safety Inspection, Testing and Certification for KOSHA. It is suitable for related regulation[Article 35 of the Industrial Safety and Health Act(Test of Personal Protective Equipment)]. While workers working in noise level of over 90dB(A), they may expose to 82dB(A) or less when they wear the advanced masks. This type masks can be an alternative for works suffering from loud noise generated by traditional air-line masks.

• 한국기계가공학회지
• /
• 제20권8호
• /
• pp.86-92
• /
• 2021

As interest and demand for high value-added industries, including the global automobile and aerospace industries, have increased recently, demand for line centers with excellent performance that can respond to the production system for producing high value-added products is also rapidly increasing. A line center improves productivity based on the installed area using a multi-spindle compared to a conventional machining center. However, as the number of spindles increases, the weight increases and results in structural problems owing to the heat and vibration generated by each spindle. Therefore, it is necessary to improve machining precision through the structural improvement of the line center. This study presents research on the stabilization design of the line center through structural stability analysis through structural analysis to develop a compact multi-axis line center. An optimization model of the line center has been proposed to improve the processing precision and increase the rigidity by performing weight reduction based on the structural analysis results.

• ETRI Journal
• /
• 제29권4호
• /
• pp.411-420
• /
• 2007

The steady evolution of mapping technology is leading to an increasing availability of multi-sensory geo-spatial datasets, such as data acquired by single-head frame cameras, multi-head frame cameras, line cameras, and light detection and ranging systems, at a reasonable cost. The complementary nature of the data collected by these systems makes their integration to obtain a complete description of the object space. However, such integration is only possible after accurate co-registration of the collected data to a common reference frame. The registration can be carried out reliably through a triangulation procedure which considers the characteristics of the involved data. This paper introduces algorithms for a multi-primitive and multi-sensory triangulation environment, which is geared towards taking advantage of the complementary characteristics of spatial data available from the above mentioned sensors. The triangulation procedure ensures the alignment of involved data to a common reference frame. The devised methodologies are tested and proven efficient through experiments using real multi-sensory data.

• 대한전자공학회논문지TC
• /
• 제41권12호
• /
• pp.131-137
• /
• 2004

본 논문에서는 등각사상 법을 이용해 유전체가 다층으로 코팅된 평행 2선식 전송선로의 특성임피던스 및 유효 유전상수 등을 계산하는 방법을 제안하였다. 먼저 두께 및 유전상수가 다른 유전체가 임의의 N 층으로 코팅되었을 때 평행 2선식 전송선로의 정전용량을 계산하였으며, 이를 이용해 임피던스 및 유효 유전상수 등을 계산하였다. Ansoft 사의 Maxwell 2D를 이용한 시뮬레이션 결과와 비교하였을 때, 계산 결과가 오차범위 4% 이내로 거의 일치함을 알 수 있었다.