• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2986-2988
• /
• 2005

To improve the reliability of power-line communication systems, the measurement and analysis has been proceeded in many power-line channel environments. In spite of the wired channel, power line channel has many multi-paths that are changing with load-variation, line-interconnection, impedance mismatching and so on. We accordingly need an analysis method based on the multi-path channel impulse response. Recently, a method to describe the homogeneous Power-line network has been published[1]. In this paper the modified method that can describe both the homogeneous and non -homogeneous power-line network has presented.

• 전자공학회논문지A
• /
• 제29A권9호
• /
• pp.46-55
• /
• 1992

본 논문에서는 다층유전체 구조를 갖는 VLSI interconnection line 에 대한 커페시턴스를 계산하기 위한 방법을 제안한다. 이 방법은 단일 유전체 구조에서 개발한 3차원 직접 적분방법을 확장한 것이다. 다층유전체에 의한 영향은 Green's function을 수정하는 대신에 경계조건을 추가함으로써 고려하였다. 여기서 사용한 경계조건은 line 표면에서는 전위에 대한 식을 사용하였고, 유전체 경계면ㅇ서는 전계에 대한 식을 사용하였다. 이 방법으로부터 얻어진 커패시턴스를 이용하여 다층유전체 구조에서의 interconnection line에 대한 RC 지연시간의 값을 구했다. 이때 사용한 interconnection 물질은 Al과 WSi-이다.

• 대한전자공학회논문지TC
• /
• 제40권10호
• /
• pp.95-102
• /
• 2003

광 전송 네트워크의 스위칭 기술에서 자원 충돌 문제를 해결하기 위한 방법으로 버퍼링은 중요한 문제중 하나이다. 본 논문은 가변길이 광 패킷 스위칭에 있어서 Fiber Delay Line(FDL)을 사용한 광 버퍼의 dimensioning과 패킷의 손실률에 대하여 연구하였다. 우선 단단(single-stage) FDL 버퍼에서의 granularity와 버퍼 손실에 대한 관계를 고찰하고 간단한 구조의 다단(multi-stage) FDL 버퍼 구조를 제안하였다. 다단 FDL 버퍼는 구현 기술이나 경제성의 측면에서 현 시점에서는 실용성이 높지 않지만 본 논문에서는 미래에 실용화가 가능할 것이라는 가정 하에 다단 FDL 버퍼 구조들을 제안한다. 제안한 FDL 버퍼 구조에서 각 스테이지에 사용되는 지연 및 패스 라인의 소요량을 시뮬레이션을 통해 고찰하고 그 사용율에 근거하여 multi-stage FDL 버퍼를 dimensioning하였다. 또한 보다 실질적인 구조의 다단(multi-stage) FDL 버퍼를 제안하고 그 적합성을 버퍼 크기와 패킷 손실율의 관계를 통하여 연구하였다.

• 한국멀티미디어학회논문지
• /
• 제19권10호
• /
• pp.1747-1758
• /
• 2016

In this paper, we propose a new fast Hough transform to improve the processing time and line detection of Hough transform that is widely used in various vision systems. First, for the fast processing time, we reduce the number of features by using multi-statistical methods and also reduce the dimension of angle through six separate directions. Next, for improving the line detection, we effectively detect the lines of various directions by designing the line detection method which detects line in proportion to the number of features in six separate directions. The proposed method was evaluated with previous methods and obtained the excellent results. The processing time was improved in about 20% to 50% and line detection was performed better in various directions than conventional methods with experimental images.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1240-1242
• /
• 2009

This paper describes a new 160x80 passive-matrix OLED driver ASIC capable in applying multi-line addressing (MLA). Application is directed towards highly-reliable displays, e.g. in automobiles.

• 대한기계학회논문집B
• /
• 제22권8호
• /
• pp.1173-1182
• /
• 1998

A throughflow analysis program for axial flow turbines is constructed, which can handle not only the two-dimensional multi-streamline (streamline curvature) method but also the one-dimensional mean line method. Calculations are performed for single stage and multi-stage axial flowturbines. For a wide operating range, the performance and flow field calculated by the present streamline curvature method are close enough to the test data. It is also revealed for the single stage turbine that the present analysis leads to far better correspondence with the experiment than other researchers" throughflow analyses. A special focus is put on the comparison of the results between the streamline curvature analysis and the mean line analysis. It is found that the mean line analysis can not predict the performance for highly off-designed conditions as accurately as the streamline curvature method, which shows the importance of considering the spanwise variation of loss and flow.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.318-323
• /
• 1992

The improvement of the production capability of multi PCB assembly line can not be simply done by improving the capacities of each assembly robot cells but must be done by controlling the production line effectively with the line host computer which controls over the whole assembly line. A real time production control, a real time model change and a real time trouble shooting compose the specific concepts of this technique. In this paper, we present and analyze the definition and application method of real time assembly concept. The meaning of real time model change, troubles and error sooting and its algorithm will be introduced. Also, the function of the host computer which is in charge of all of many different tasks mentioned above and the method are presented. The improvement of the productivity is mainly focused on the efficiency of multi-PCB production control. The importance of this aspect is gradually increasing, which we have presented the analysis and the solution.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.53-60
• /
• 1995

A multi-leg spread mooring system for floating offshore structures is important, but the multi-leg static analysis is complicated due to the nonlinear behavior of each line and the effect of current which affects each line differently. The pretensioned position of the multi-leg mooring system obtained from the static equilibrium condition changes into a different position due to external loads and current. In this paper, the new position and the static tension at each line are caculated. The relation between the initial static equilibrium position and the new position due to the external loads is expressed in terms of the Taylor's series expansion. The Runge-Kutta $4^{th}$ method is employed in analyzing the 3-dimensional static cable nonlinear equations.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권1호
• /
• pp.56-60
• /
• 2005

In the power-line communication(PLC) systems, the power line is a wired medium. However, the power line channel has the multi-path fading characteristics like the wireless channel in the wireless communication systems because it has the signal reflection and divergence by the impedance mismatching between many branch lines and loads. So the analysis of the multi-path characteristics is very important, and it has been doing by the several measurement methods for the impulse response between the transmitter and the receiver. PN sequence method has originally been used as a wideband impulse response measurement mettled for wireless channel, but it is recently being applied to not only the wireless channel but also the wired channel like the power line channel. This method is more useful and effective for the long distance communication channel like the medium voltage power distribution line with the multi-paths[1]. In this thesis, we have measured impulse response for the medium voltage power distribution line channel by the wideband measurement method using PN sequence, analytically studied the measured data and presented the results.

• Smart Structures and Systems
• /
• 제22권1호
• /
• pp.81-94
• /
• 2018

Automatic Generation Control (AGC) has functionally controlled the interchange power flow in order to suppress the dynamic oscillations of frequency and tie-line power deviations as a perturbation occurs in the interconnected multi-area power system. Furthermore, Flexible AC Transmission Systems (FACTS) can effectively assist AGC to more enhance the dynamic stability of power system. So, Static Synchronous Series Compensator (SSSC), one of the well-known FACTS devices, is here applied to accurately control and regulate the load frequency of multi-area multi-source interconnected power system. The research and efforts made in this regard have caused to introduce the Fractional Order Proportional Integral Derivative (FOPID) based SSSC, to alleviate both the most significant issues in multi-area interconnected power systems i.e., frequency and tie-line power deviations. Due to multi-objective nature of aforementioned problem, suppression of the frequency and tie-line power deviations is formularized in the form of a multi-object problem. Considering the high performance of Multi Objective Bees Algorithm (MOBA) in solution of the non-linear objectives, it has been utilized to appropriately unravel the optimization problem. To verify and validate the dynamic performance of self-defined FOPID-SSSC, it has been thoroughly evaluated in three different multi-area interconnected power systems. Meanwhile, the dynamic performance of FOPID-SSSC has been accurately compared with a conventional controller based SSSC while the power systems are affected by different Step Load Perturbations (SLPs). Eventually, the simulation results of all three power systems have transparently demonstrated the dynamic performance of FOPID-SSSC to significantly suppress the frequency and tie-line power deviations as compared to conventional controller based SSSC.