• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.392-396
• /
• 1999

Superconducting YBa$_2Cu_3O_{7-{\delta}}$(YBCO) thin films were grown on Hastelloy(Ni-Cr-Mo alloys) with CeO$_2$ buffer layer in-situ by pulsed laser deposition in a multi-target processing chamber. To apply superconducting property on power transmission line, we have deposited YBCO thin film on flexible metallic substrate. However, it is difficult to grow the YBCO films on flexible metallic substrates due to both interdiffusion problem between metallic substrate and superconducting overlayers and non-crystallization of YBCO on amorphous substrate. It is necessary to use a buffer layer to overcome the difficulties. We have chosen CeO$_2$ as a buffer layer which has cubic structure of 5.41 ${\AA}$ lattice parameter and only 0.2% of lattice mismatch with 3.82 ${\AA}$ of a-axis lattice parameter of YBCO on [110] direction of CeO$_2$ In order to enhance the crystallization of YBCO films on metallic substrates, we deposited CeO$_2$ buffer layers with varying temperature and 02 pressure. By XRD, it is observed that dominated film orientation is strongly depending on the deposition temperature of CeO$_2$ layer. The dominated orientation of CeO$_2$ buffer layer is changed from (200) to(111) by increasing the deposition temperature and this transition affects the crystallization of YBCO superconducting film on CeO$_2$ buffered Hastelloy.

• 한국재료학회지
• /
• 제15권2호
• /
• pp.134-138
• /
• 2005

This study was performed to investigate the surface properties of electrochemically oxidized pure niobium by anodic oxide and hydrothermal treatment technique. Niobium specimens of $10mm\times10mm\times1.0mm$ in dimension were polished sequentially from $\#600,\;\#800,\;\#1000$ emery paper. The surface of pure niobium sperimens was anodized in an electrolytic solution that was dissolved calcium and phosphate in water. The electrolytic voltage was set in the range of 250 V and the current density was $10mA/cm^2$. The specimen was hydrothermal treated in high-pressure steam at $300^{\circ}C$ for 2 hours using an autoclave. And all specimens were immersed in the in the Hanks' solution nth pH 7.4 at $37^{\circ}C$ for 30 days. The surface of specimen was characterized by surface roughness, scanning electron microscope(SEM), energy dispersion X-ray analysis(EDX), X-ray photoemission spectroscopy(XPS) test. The value of surface roughness was the highest in the anodized sample and $0.41{\pm}0.04\;{\mu}m$. The results of the SEM observation show that oxide layers of the multi porosity in the anodized sample were piled up on another, and hydroxyapatite crystal was precipitate from the surface of the hydrothermal treated sample. In the XPS analysis, O, Nb, C peak and small amounts of N peak were found in the polished specimens while Ca and P peak in addition to O, Nb, C and peak were observed in the hydrothermal treated sample.

• 한국인터넷방송통신학회논문지
• /
• 제10권5호
• /
• pp.153-160
• /
• 2010

집적광학 바이오센서 구조에 적합한 비공진 반사 광도파로(ARROW: Antiresonant Reflecting Optical Waveguides)의 Si(기판)/$SiO_2$(클래딩)/$Si_3N_4$(비공진 클래딩)/$SiO_2$(코어)/air 다층박막 립 광도파로에 대한 최적화를 BPM 전산해석 방법을 이용해서 수행하였다. 전송손실을 최소화하기에 적합한 비 공진 클래딩의 두께를 유도하였으며, 소산파와 깊은 관련이 있는 손실모드에 대해서 이론적으로 검토하였다. 전산해석을 통해서 전송손실을 최소화하기 위한 립 광도파로의 깊이, 폭, 굴절률과 클래딩의 두께를 각각 2.3${\mu}m$, 5${\mu}m$, 1.488, 그리고 0.11${\mu}m$로 계산되었다. 최적화된 제원으로 비공진 반사 광도파로의 2차원, 3차원 전송특성을 확인하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권2호
• /
• pp.131-135
• /
• 2005

The effect of different surface passivation films on blue or green (465-505 nm) InGaN/GaN multi-quantum well light-emitting diodes (LEDs) die were examined. $SiO_2$ or $SiN_x$ deposited by plasma enhanced chemical vapor deposition, or $Sc_2O_3$ or MgO deposited by rf plasma enhanced molecular beam epitaxy all show excellent passivation qualities. The forward current-voltage (I-V) characteristics were all independent of the passivation film used, even though the MBE-deposited films have lower interface state densities ($3-5{\times}10^{12}\;eV^{-1}\;cm^{-2}$) compared to the PECVD films (${\sim}10^{12}\;eV^{-1}\;cm^{-2}$), The reverse I-V characteristics showed more variation, hut there was no systematic difference for any of the passivation films, The results suggest that simple PECVD processes are effective for providing robust surface protection for InGaN/GaN LEDs.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.250-256
• /
• 2017

A graphene electrode with a novel in-plane structure is proposed and successfully adopted for use in supercapacitor applications. The in-plane structure allows electrolyte ions to interact with all the graphene layers in the electrode, thereby maximizing the utilization of the electrochemical surface area. This novel structure contrasts with the conventional out-of-plane stacked structure of such supercapacitors. We herein compare the volumetric capacitances of in-plane- and out-of-plane-structured devices with reduced multi-layer graphene oxide films as electrodes. The in-plane-structured device exhibits a capacitance 2.5 times higher (i.e., $327F\;cm^{-3}$) than that of the out-of-plane-structured device, in addition to an energy density of $11.4mWh\;cm^{-3}$, which is higher than that of lithium-ion thin-film batteries and is the highest among in-plane-structured ultra-small graphene-based supercapacitors reported to date. Therefore, this study demonstrates the potential of in-plane-structured supercapacitors with high volumetric performances as ultra-small energy storage devices.

• 방송공학회논문지
• /
• 제20권5호
• /
• pp.756-769
• /
• 2015

본 논문에서는 SHVC (Scalable High Efficiency Video Coding)의 계층적 부호화 구조를 기반으로 HDR (High Dynamic Range) 영상과 SDR (Standard Dynamic Range) 영상의 부호화 방법을 제안한다. 본 논문의 제안하는 방법은 SHVC 계층적 부호화 구조 중 기본 계층에서 SDR 영상을 부호화 및 복호화하여, 기존의 디스플레이 장치에 대한 하위 호환성을 제공하고, 향상 계층에서 HDR 영상에 대한 부호화 및 복호화를 수행한다. 또한, 기본 계층의 복원 영상에 전역 역 톤 맵핑 (Global inverse tone mapping)을 수행하여 향상 계층의 참조 영상으로 사용함으로써 HDR 영상의 부호화 효율을 향상시켰다. 본 논문에서 제안하는 방법을 통해 기존의 SHVC 레퍼런스 소프트웨어인 SHM7.0 대비 약 향상 계층에서 평균 43%, 최대 76.3%의 BD-Bitrate 감소를 얻을 수 있었으며, 기본 계층과 향상 계층 전체에서 평균 15.7%, 최대 31%의 BD-Bitrate 감소를 보였다.

• Composites Research
• /
• 제12권6호
• /
• pp.53-64
• /
• 1999

LCP원섬유(fibril)와 폴리아미드6 (PA6)수지로 사출성형된 복합재료 박판(molded thin composite plaques)의 미세구조와 굽힘강도에 대한 에폭시수지 함유율의 효과를 살펴보았다. 성형은 LCP원섬유의 용융점 이하에서 하였으며 이렇게 만들어진 판재는 횡방향 배향을 보이는 두께 $65-120{\mu\textrm{m}}$의 표피층(surface skin layer), 유동방향과 거의 일치하는 배향을 보이는 표피아래층(sub-skin layer), 아크형 곡선유동형태를 보이는 심층(core layer)으로 구성되어 있었다. 에폭시함유율이 달라도 각 층의 미세구조방향은 유사하였으나 에폭시함유율이 증가함에 따라 LCP영역(domain)이 원섬유상에서 층상구조로 변했고 거시적 파괴진로(fracture path)는 인장형에서 전단형으로 바뀌었다. 또한 에폭시 4.8vol%에서 가장 우수한 굽힘강도와 파단변형율을 보였다. 굽힘강도를 수치해석한 결과 에폭시성분을 복합재에 부가하면 각 층의 두께와 미세구조 같은 기하학적인 형태가 변하면서 각 층 자체의 탄성계수와 강도가 열등화 되었음을 알았다.

• 한국자기학회지
• /
• 제13권3호
• /
• pp.115-120
• /
• 2003

스퍼터링 방법으로 FM/M/FM의 다층박막을 증착한 다음 초소형 박막 인덕터를 제작하기 위하여 반도체 공정을 대체할 수 있는 레이저 미세가공 기술을 개발하였다. TE $M_{00}$ 모드로 발진하는 CW Nd:YAG 레이저를 active Q-switching 하여 펄스폭이 200 ns인 극 초단 레이저 펄스를 얻었다. 레이저 미세가공 조건을 반복율 5 kHz, 펄스 당 에너지 5 mJ/pulse로 최적화 하여 분해능이 20 $\mu\textrm{m}$인 line patterning을 얻었다.

• 천문학회보
• /
• 제35권1호
• /
• pp.39.2-39.2
• /
• 2010

In this paper, I present the domestic development of near infrared camera systems for the ground telescope and the space satellite. These systems are the first infrared instruments made for astronomical observation in Korea. KASINICS (KASI Near Infrared Camera System) was developed to be installed on the 1.8m telescope of the Bohyunsan Optical Astronomy Observatory (BOAO) in Korea. KASINICS is equipped with a $512{\times}512$ InSb array enable L band observations as well as J, H, and Ks bands. The field-of-view of the array is $3.3'{\times}3.3'$ with a resolution of 0.39"/pixel. It employs an Offner relay optical system providing a cold stop to eliminate thermal background emission from the telescope structures. From the test observation, limiting magnitudes are J=17.6, H=17.5, Ks=16.1 and L(narrow)=10.0 mag at a signal-to-noise ratio of 10 in an integration time of 100 s. MIRIS (Multi-purpose InfraRed Imaging System) is the main payload of the STSAT-3 in Korea. MIRIS Space Observation Camera (SOC) covers the observation wavelength from $0.9{\mu}m$ to $2.0{\mu}m$ with a wide field of view $3.67^{\circ}{\times}3.67^{\circ}$. The PICNIC HgCdTe detector in a cold box is cooled down below 100K by a micro Stirling cooler of which cooling capacity is 220mW at 77K. MIRIS SOC adopts passive cooling technique to chill the telescope below 200K by pointing to the deep space (3K). The cooling mechanism employs a radiator, a Winston cone baffle, a thermal shield, MLI of 30 layers, and GFRP pipe support in the system. Opto-mechanical analysis was made in order to estimate and compensate possible stresses from the thermal contraction of mounting parts at cryogenic temperatures. Finite Element Analysis (FEA) of mechanical structure was also conducted to ensure safety and stability in launching environments and in orbit. MIRIS SOC will mainly perform the Galactic plane survey with narrow band filters (Pa $\alpha$ and Pa $\alpha$ continuum) and CIB (Cosmic Infrared Background) observation with wide band filters (I and H) driven by a cryogenic stepping motor.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 추계 기술심포지움 논문집
• /
• pp.61-64
• /
• 2000

IMT 2000 단말기용 2.14 GHz 대역의 저잡음 증폭기 (Low Noise Amplifier, LNA)를 MCM-C 기술을 이용하여 제작하고 그 특성을 측정하였다. 먼저 저잡음 증폭기 회로를 설계한 후, 각 소자들의 고주파 library를 이용한 회로 시뮬레이션으로과 특성을 확인하였다. 시뮬레이션 상에서 이득(Gain)은 17 dB 였으며, 잡음지수 (Noise Figure)는 1.4 dB 였다. MCM-C 저잡음 증폭기는 LTCC 기판과 전극 및 저항체의 동시소성에 의해 코일(L), 콘덴서(C), 저항(R)을 기판 내부에 넣었으며, 마이크로 스트립 라인과 SMD 부품의 실장을 위한 Pad를 최상부에 제작하였다. 기판은 총 6 층으로 구성하였으며, 내부에 포함된 수동소자는 코일 2개, 콘덴서 2개, 저항 3개 등 총 7 개 였다. 시작품의 특성 측정 결과, 2.14 GHz에서 이득은 14.7 dB 였으며, 잡음지수는 1.5 dB 정도의 값을 가졌다.