• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1304-1309
• /
• 2004

Synthesis of carbon nanotubes and nanofibers on a catalytic metal substrate, using an ethylene fueled inverse diffusion flame, was investigated. Multi-walled carbon nanotubes, with diameters of 20 - 60nm, were formed on the substrate coated with nickel-nitrate in the region of 5 - 6mm from the flame center along the radial direction. The gas temperature for this region was ranging from about 1400 to 900K. Nickel particles originated from the coated nickel-nitrate on the substrate were the major catalyst for the formation of the nanomaterials. HR-TEM and Raman spectrum revealed that synthesized carbon nanotubes had multi-walled structures with some defective graphite layers at walls.

• 한국세라믹학회지
• /
• 제40권9호
• /
• pp.832-836
• /
• 2003

Multi-layer ceramic composites were prepared by tape casting followed by hot pressing using silicon nitride layer with silicon nitride whiskers, silicon nitride layer with silicon carbide particles and boron nitride-alumina layer. The whiskers were aligned during the casting. As the whisker content of the silicon nitride layer was increased up to 10 wt％, the flexural strength of the multi-layer composite was increased. However, further increase of the whisker content in the layer resulted in a rapid decrease of the strength of the composite. The results suggest that the strength of multi-layer ceramic composite showing non-catastrophic failure behavior can be significantly improved by incorporating the aligned whiskers in the layers.

• 한국항공우주학회지
• /
• 제46권7호
• /
• pp.575-582
• /
• 2018

우주용 냉각기는 관측위성의 적외선 검출기 초점면부의 극저온 냉각을 위해 적용되며, 궤도운용 시 단일 주파수 형태의 미소진동을 발생한다. 상기 미소진동은 관측위성의 영상품질을 저하시키는 주된 요인이며, 이에 따라 미소진동 절연이 요구된다. 본 연구에서는 상기 우주용 냉각기의 미소진동 절연을 목적으로 별도의 발사구속장치 적용 없이도 발사진동 및 궤도 미소진동환경에 동시적용 가능한 적층형 블레이드 진동절연기를 제안하였다. 본 진동절연기에 적용된 블레이드는 얇은 금속 박판을 다층으로 적층하고 각 층 상호면에 점탄성 특성 부여가 가능한 테이프를 적용하여 발사환경에서의 피로 내구성 향상 및 고댐핑 특성 부여를 목적하였다. 제안된 진동절연기의 기본특성 확인을 위해 자유감쇠 시험을 실시하였으며, 인증수준에서의 발사진동 시험을 통해 설계유효성을 입증하였다.

• 한국전자파학회논문지
• /
• 제28권6호
• /
• pp.452-458
• /
• 2017

배기관 및 급수관에 사용되는 다층 구조 도파관은 공정의 이점 및 유속 손실을 줄이는 장점을 가진다. 또한, 겹치는 층의 수를 증가시켜 차폐효과를 보상할 수 있다. 하지만 다층 구조 도파관의 차폐효과를 기존의 차폐효과 방정식으로는 예측할 수 없음에서 발생하는 적용 한계를 극복하기 위해, 수정된 차폐효과 방정식을 제안하였다. 수정된 차폐효과 방정식은 다층 구조 도파관 내부가 공기로 채워진 경우와 특정 매질이 채워졌을 경우로 나누어서 2층 구조에서부터 64층 구조까지 증가시켜 결과를 얻어냈다. 또한, 결과의 타당성을 증명하기 위하여 시뮬레이션 결과와 비교하여 제안된 차폐 효과 방정식이 일치하는 것을 확인하였다.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.352-356
• /
• 2011

Transparent conducting oxide films like ITO/Au/ITO and AZO/Au/AZO were fabricated with a sputter at a low-temperature of less then $70^{\circ}C$ and their crystallization and opto-electrical properties were studied. X-ray diffractiometry showed that single-ITO layer was amorphous, whereas, ITO of ITO/Au/ITO multi-layer was crystal. The ITO crystallization and its orientation depended on Au crystallization. Surface roughness of the ITO-multi-layers were in the range of 29-88% of that of ITO-single layer. ITO on amorphous gold layer had more rough surface than ITO on crystal gold. The gold layer between ITO improved electrical conductivity. Carrier density, mobility, resistivity and sheet resistance of ITO-single layer were $2.3{\times}10^{19}/cm^3$, $85{\times}cm^2$/Vs, $31{\times}10^{-4}{\Omega}cm$, and $310{\times}{\Omega}/cm^2$, respectively. Those of ITO/Au/ITO-multi-layers depended on Au-interlayer-thickness, which were in the range of $3.6{\times}10^{19}{\sim}4.2{\times}10^{21}/cm^3$, $43{\sim}85cm^2$/Vs, $0.17{\times}10^{-4}{\sim}25{\times}10^{-4}{\Omega}cm$, and $1.7{\sim}20{\times}{\Omega}/cm^2$, respectively. The sheet resistances of the single-layer ITO and the multi-layer ITO were 310 and $2.7{\sim}21{\Omega}/cm^2$, respectively. That of AZO/Au/AZO was $8.6{\Omega}/cm^2$, which was better than the single-layer ITO.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권4호
• /
• pp.8-11
• /
• 2006

High temperature superconducting coated conductor has various buffer structures on Ni-W alloy. We comparatively studied the growth conditions of a multi buffer layer $(CeO_2/YSZ/CeO_2)$ and a single buffer layer$(CeO_2)$ on textured Ni-W alloy tapes. XRD data showed that the qualities of in-plane and out-of-plane textures of the two type buffer structures were good. Also, we investigated the properties of SmBCO superconducting layer that was deposited on the two type buffer structure. The SmBCO superconducting properties on the single and multi buffer structure showed different critical current values and surface morphologies. FWHM of In-plane and out-of-plane textures were $7.4^{\circ},\;5.0^{\circ}$ in the top CeO2 layer of the multi-buffer layers of $CeO_2/YSZ/CeO_2$, and $7.3^{\circ},\;5.1^{\circ}$ in the $CeO_2$ single buffer layer. $1{\mu}m-thick$ SmBCO superconducting layers were deposited on two type buffer layer. $I_c$ of SmBCO deposited on single and multi buffer were 90 A/cm, 150 A/cm and corresponding $J_c$ were $0.9MA/cm^2,\;1.5MA/cm^2$ at 77K in self-field, respectively.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2010년도 한국컴퓨터종합학술대회논문집 Vol.37 No.1(A)
• /
• pp.23-24
• /
• 2010

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 창립 20주년기념 특별학술발표회
• /
• pp.305-307
• /
• 2009

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.91-91
• /
• 2007

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2008년도 High Temperature Superconductivity Vol.XVIII
• /
• pp.73-73
• /
• 2008