• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.346-349
• /
• 2004

In the previous experimental study about extru-bending of angle product, the bending of extruded angle products with the '${\wedge}$' section and 'ㄱ' section can be abtained by the hot metal extru-bending machine with the two punches moving in the different velocity. The bending curvature can be controlled by the different velocity of billets through the two-hole container. This paper describes simulation of extru-bending process by the difference of punch velocities. The result of the forming simulation by $DEFORM^{TM}-3D$ shows that the bending phenomenon at the die exit during extrusion can be abtained by the two punches moving in the different velocity. And it is possible to design extrusion dies and to control the curvature of product through the simulation of extru-bending process by analysis

• 한국세라믹학회지
• /
• 제42권12호
• /
• pp.865-871
• /
• 2005

Submicron thick solid electrolyte membrane is essential to the implementation of low temperature solid oxide fuel cell, and, therefore, development of new electrode structures is necessary for the submicron thick solid electrolyte deposition while providing functions as current collector and fuel transport channel. In this research, a nickel membrane with multi-stage nano hole array has been produced via modified two step replication process. The obtained membrane has practical size of 12mm diameter and $50{\mu}m$ thickness. The multi-stage nature provides 20nm pores on one side and 200nm on the other side. The 20nm side provides catalyst layer and $30\~40\%$ planar porosity was measured. The successful deposition of submicron thick yttria stabilized zirconia membrane on the substrate shows the possibility of achieving a low temperature solid oxide fuel cell.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.728-729
• /
• 2010

Opportunistic spectrum access (OSA) allows unlicensed users to share licensed spectrum in space and time with no or little interference to primary users, with bring new research challenges in MAC design. We propose a cognitive MAC protocol using statistical channel utilization information and selecting appropriate spectrum hole for multi-channel data transmission. The protocol based on the CSMA/CA, exploits statistics of spectrum usage for decision making on channel access.

• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.1-7
• /
• 2007

The effect of injector geometries including the injection angle and number of nozzle holes on homogeneous charge compression ignition (HCCI) engine combustion has been investigated in an automotive-size single-cylinder diesel engine. The HCCI engine has advantages of simultaneous reduction of PM and NOx emissions by achieving the spatially homogenous distribution of diesel fuel and air mixture, which results in no fuel-rich zones and low combustion temperature. To make homogeneous mixture in a direct-injection diesel engine, the fuel is injected at early timing. The early injection guarantees long ignition delay period resulting in long mixing period to form a homogeneous mixture. The wall-impingement of the diesel spray is a serious problem in this type of application. The impingement occurs due to the low in-cylinder density and temperature as the spray penetrates too deep into the combustion chamber. A hole-type injector (5 holes) with smaller angle ($100^{\circ}$) than the conventional one ($150^{\circ}$) was applied to resolve this problem. The multi-hole injector (14 holes) was also tested to maximize the atomization of diesel fuel. The macroscopic spray structure was visualized in a spray chamber, and the spray penetration was analyzed. Moreover, the effect of injector geometries on the power output and exhaust gases was tested in a single-cylinder diesel engine. Results showed that the small injection angle minimizes the wall-impingement of diesel fuel that results in high power output and low PM emission. The multi-hole injector could not decrease the spray penetration at low in-cylinder pressure and temperature, but still showed the advantages in atomization and premixing.

• 대한기계학회논문집B
• /
• 제41권9호
• /
• pp.623-629
• /
• 2017

다공배플을 가진 마이크로연소기에 레이놀즈응력 난류모형을 이용하여 난류유동 및 혼합특성에 대한 수치해석 연구를 수행하였다. 다공배플은 연소실 내부에 다수의 3차원 와유동을 발생시키는 기하학적 특징을 가지고 있다. 그러한 형상특징 중에서 배플두께를 변화시킬 경우 와유동구조의 다양한 변화가 얻어졌다. 여러 와유동중에서 연료유동으로부터 생성된 와유동은 혼합도 증가에 결정적 역할을 하였다. 연소실 내부의 3차원 와유동구조는 배플두께 변화에 따른 유동의 발달상태에 의존하였다. 특히, 배플두께가 연료유입구 직경보다 작을수록 배플구멍 제트유동의 속도분포는 포물선형태에서 안장모양의 형태로 변하였다. 연소실내부의 재순환영역크기 및 혼합도는 이러한 제트유동구조에 밀접한 상관관계를 가졌다.

• 한국진공학회지
• /
• 제19권5호
• /
• pp.331-340
• /
• 2010

초고주파 다중 중공 음극 방전을 이용한 플라즈마 화학 기상 증착 장치를 3차원 수치 모델링하였다. 기본적인 방전 특성을 파악하기 위하여 알곤 플라즈마를 40 MHz, 100 V, 133.3 Pa (1 Torr)의 조건에 대해서 계산하였다. 6 mm 직경의 홀을 20 mm 간격으로 배열하였고 전극 간격은 10 mm를 가정하였다. 피크 플라즈마 밀도는 홀의 하부 중앙에서 $5{\times}10^{11}#/cm^3$ 였으며 전자 온도는 접지 상태로 가정한 기판과 챔버 벽면 주위에서 가장 높았다. 준안정 상태에 의한 2단 이온화 속도는 전자 충돌에 의한 직접 이온화보다 10배 가량 높았다. 수소에 대한 계산에서는 이온화 이외의 다양한 에너지 소모 경로가 있어서 방전의 국재화가 잘 이루어지지 않았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1853-1856
• /
• 2003

Multi-layer printed circuit board(PCB) is being used widely for the product with relatively complex circuits such as TV, VTR and FAX. With the rapid enlargement of electronic and IT industry, the hole machining technology on multi-layer PCB is increasingly required to improve. Thus, the micro drilling with ultrasonic vibration can be a good method for hole machining. Unlike conventional drilling, ultrasonic vibration applied drilling introduces less wear and fracture of not only tool but also internal surface of workpiece due to little cutting resistance, thus, machinability can be improved. The experiment is conducted through the comparison between the results of conventional drilling and ultrasonic micro drilling as well as among each results by the variation according to not only feed rate of drill but also amplitude and frequency of ultrasonic vibration. The multi-layer PCB consists of 6 layers and ${\Phi}$0.3 diameter drill was used. As a result, it was found that the state of internal surfaces of holes on multiple layer PCBs is improved by the application of ultrasonic vibration.

• 한국전자파학회논문지
• /
• 제15권2호
• /
• pp.172-177
• /
• 2004

본 논문에서는 기존의 DGS를 LTCC 공정기술을 이용해서, 적층구조에 적용해 보았다. 크기 축소 및 품질계수를 높이기 위해서 나선형 DGS를 사용하였으며, 적층 구조에서 기존의 DGS와 같은 공진 특성을 나타내는 것을 확인하였다. 2개의 나선형 DGS를 결합하여, 새로운 형태의 2단 적층 대역통과 여파기를 구성하였으며, 공정상의 편의를 위해서 비아(Via-Hole)가 없도록 설계하였다. 5.25 GHz 대역 무선랜용 대역통과 여파기를 설계 제작하였으며, 제작한 여파기의 삽입손실은 1.5 dB 이내이며, 크기는 2.0 mm${\times}$1.2 mm${\times}$1.1 mm(L${\times}$W${\times}$H)로 저손실의 초소형 여파기 제작에 적합함을 확인하였다.

• 한국레이저가공학회지
• /
• 제6권1호
• /
• pp.9-16
• /
• 2003

Micromachining using the DPSS 3rd Harmonic Laser (355nm) has outstanding advantages as a UV source in comparison with Excimer lasers in various aspects such as maintenance cost, maskless machining, high repetition rate and so on. It also has the greater absorptivity of many materials in contrast to other IR sources. In this paper, the process for micro-drilling of blind hole in Cu/PI/Cu substrate with the DPSS UV laser and the scanning device is investigated by the experimental methods. It is known that there is a large gap between the ablation threshold of copper and that of PI. We use the Archimedes spiral path for the blind hole with different energy densities to ablate the different material. Finally, the blind via hole of diameter 100$\mu\textrm{m}$ and 50$\mu\textrm{m}$ was drilled.

• 천문학회보
• /
• 제38권2호
• /
• pp.42.2-42.2
• /
• 2013

We investigate the cosmic evolution of the black hole mass-bulge luminosity relation with a sample of 52 moderate-luminosity AGNs at $z{\simeq}0.36$ and $z{\simeq}0.57$, corresponding to look-back times of 4 and 6 Gyrs. By employing robust multi-component spectral and structural decomposition methods to the obtained high-quality Keck spectra and high-resolution HST images, black hole masses ($M_{BH}$) are estimated from the Hbeta broad emission line with the 5100A nuclear luminosity, and bulge luminosities ($L_{bul}$) are derived from the surface photometry. Based on these consistent measurements, we constrain the redshift evolution of the $M_{BH}-L_{bul}$ relation by performing the Monte Carlo simulations designed to account for selection effects. We provide implications of our results in terms of the black hole-galaxy co-evolution and discuss possible bulge growth mechanisms.