• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1193-1198
• /
• 2012

In this paper, we design and implement A4 sized, web-based POP(Print On Demand) system using multi-layer technique. We Propose the framework of POP system, which uses multi-layer technique, uses highly accessible web-service, produces template, enables a user to easily edit, and allows the user to instantly print edited files. This system will be widely used in web-based electronic publication and e-book.

• Journal of Digital Convergence
• /
• v.18 no.6
• /
• pp.425-433
• /
• 2020

Digilog book using augmented reality is a form that augmented reality is implemented by illuminating the camera embedded in the mobile image on the page registered as an image marker after downloading the application, which shows a fragmentary limitation in the content implementation method. Therefore, in this study, we proposed a pop-up multi-tracking method that enables two-way interaction in a digit log book using augmented reality technology. Through this, we commissioned an authorized agency to test the technical differentiation of augmented reality content for two prototypes of existing book-type Digilog Book and Pop-up-type Digilog Book. A test report was issued. The pop-up type digit log book suggested in this study enables the user to implement the interactive contents according to the user's action (movement). This can induce the interaction between the virtual image and the printed picture book and give the learner an interest and immersion, so that it is possible to express the interaction of the digital log book.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.175-181
• /
• 2014

A four-link mechanism consisting of torsion bars is used for opening the trunk lid in most midsize sedans. When the weight of the lid is in equilibrium with the spring force exerted by torsion bars, the lid stops opening at a pop-up height. However, the actual pop-up height has large deviations from the specified height even with the same parts in the same car model, which leads to quality issues. Automotive manufacturers have experienced this deviation problem despite much effort to resolve it. In this research, we developed a multi-body dynamics model for the analysis of pop-up deviation of a trunk lid with torsion bars, which can simulate the actual pop-up motion of the trunk lid by considering kinematic constraints of the motion and friction forces in joints. We could also determine the most important factor that governs the pop-up height by sensitivity analysis of all parts. The developed system can be used for the analysis of other trunk lid systems to control the tolerance of parts.

• Journal of Fashion Business
• /
• v.10 no.4
• /
• pp.114-129
• /
• 2006

This purpose of this study is to research on the influence on the creation of young generation's street fashion of pop stars focused on pop music given the fact that fashion can be created by popular culture in this multi-media era. Also, this study is to provide useful data for the activation of the creation of young fashion culture and the fashion industry through pop stars' fashion. The pop stars' fashion that has affected young street fashion is as follows : Elvis Presley's rock'n'roll style, Beatles' mods style, Janis Joplin's hippy style, Sex Pistols's punk style, Madonna's boy-toy and corset style, Michael Jackson's androgynous style, Puff Daddy and L.L Cool J's hip-hop style, Bob Marley's reggae style, Spice Girls, Jennifer Lopez and Britney Spears's sexy style. The young street fashion culture of pop stars and its industrial meaning withdrawn from the above are as follows : Creation of a fashion icon, Creation of anti-fashion, Liberation of a sex role, Costume play culture, Activation of the young fashion industry through star marketing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.498-499
• /
• 2012

In this paper, we design and implement A4 sized, web-based POP(Print On Demand) system using multi-layer technique. We Propose the framework of POP system, which uses multi-layer technique, uses highly accessible web-service, produces template, enables a user to easily edit, and allows the user to instantly print edited files. This system will be widely used in web-based electronic publication and e-book.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.377-387
• /
• 2006

The objective of this study was to evaluate the influence of multiple adhesive coatings on the thickness of hybrid and adhesive layer and shear bond strength(SBS) of self-etch adhesives and self-etch primer adhesives. The buccal or lingual crown dentin of extracted human molars was used. Self-etch adhesives or self-etch primer adhesives were applied 1, 2 and 3 times on the dentin before light curing. In another group adhesives were reapplied after light curing first layer. Treated surfaces were prepared to measure the thickness of hybrid and adhesive layer with SEM, and shear bond strength to dentin using an Instron machine. The following results were obtained : 1. The adhesive layers increased with the number of coatings(p<0.05) with all adhesives. Adpor Prompt L-Pop and Xeno III were significantly thinner than self-etch primer adhesives (p<0.05). 2. The thickness of hybrid layers increased with the number of coatings (p<0.05). 3. The shear bonding strength of Unifil Bond and Clearfill SE Bond were higher than Scotchbond Multipurpose Plus and Adpor Prompt L-Pop (p<0.05), and similar with Xeno III. 4. The shear bond strength increased significantly with the number of coatings in Adpor Prompt L-Pop(p<0.05), but decreased at 3 times in AdheSE Bond(p>0.05). 5. In Adpor Prompt L-Pop and Xeno III, the shear bond strength decreased when adhesives were reapplied after curing the first adhesive layer.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.263-271
• /
• 2003

The purpose of the present study was to evaluate the patterns of hybrid layer according to the application time and the frequency and its effects on the shear bonding strength of All-In-One system in primary teeth. A single bonding agent(Scotchbond Multi-Purpose Plus, 3M) and an All-In-One system(Prompt L-pop, 3M ESPE) were applied on the dentin varying the application time and the frequency in primary teeth. Shear bond strength was measured and the patterns of hybrid layers were observed by SEM. The following results were obtained ; 1. The shear bonding strength of single bonding agent was significantly higher than that of All-In-One system(P<0.05). 2. The shear bonding strength of All-In-One system applied twice or 3 times were higher than that of applied once (P<0.05). And thickness of the hybrid layer was increased when applied twice or 3 times compared to once. 3. The shear bonding strength of All-In-One system when applied for 15 second and 30 second were higher than that of 7 second (P<0.05). And the hybrid layer thickness of 15 second and 30 second's application time were higher than that of 7 second. 4. Thickness of hybrid layer applied with single bonding agent was $2-4{\mu}m$ and that of All-In-One system was $1-2{\mu}m$.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.595-603
• /
• 2005

Incomplete removal of bacteria contaminated dentin or enamel associated with caries is a potential problem in restorative dentistry Secondary or residual caries, pulpal inflammation and hypersensitivity may result from bacteria left after the initial preparation, especially if an adequate seal against microleakage is not obtained. A possible solution to eliminate residual bacteria left in a cavity preparation would be to treat the cavity with cavity disinfectant wash. But a potential problem with using a cavity disinfectant with dentin bonding agents could be their interference with the ability of the resin to bond to the tooth micromechanically. The purpose of this study was to evaluate the effect of 2% chlorhexidine containing cavity disinfectant ($Consepsis^{(R)}$) on shear bond strength and microleakage of dentin bonding agents, $Adper ^{TM}$ $Scotchbond^{TM}$ Multi-Purpose, $Adper^{TM}$ Single Bond and $Adper^{TM}\;Prompt^{TM}\; L-Pop^{TM}$ Sixty and sixty sound human third molar teeth, respectively, were used for shear bond strength and microleakage test. For experimental group, cavity disinfectant was applied before dentin bonding agents, and was not applied for the control group. The result from the this study can be summarized as follows ; 1. Use of 2% chlorhexidine containing cavity disinfectant($Consepsis^{(R)}$) does not significantly affect the shear bond strength of dentin bonding agents. 2. Use of 2% chlorhexidine containing cavity disinfectant($Consepsis^{(R)}$) does not significantly affect the microleakage of dentin bonding agents.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.368-371
• /
• 2003

The humidity sensors with a stable characteristics and gas sensors operating at room temperature have been fabricated, and a multi-functional sensor system which has gas sensor, humidity sensor, temperature sensor and control circuit has been applied to the microwave oven system. For a suitable cooking state, the humidity sensors was more applicable to heating and defrosting condition than gas sensors, however, the dynamic characteristics of gas sensors were obtained in the easy burning food such as pop corn.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.216.2-216.2
• /
• 2013

Nano-indenter는 팁을 박막 표면으로부터 일정 깊이까지 일정한 비율로 힘을 팁에 인가하여 그에 따른 박막의 반응을 in-situ로 확인하기 위하여 고안된 장치이며, 박막은 물론 나노 구조물까지 다양한 범위에서 기계적 특성을 분석하기 위하여 사용되고 있다. 이 연구에서는 유전체 및 확산방지막으로 사용되는 Hf을 rf magnetron sputter로 증착하였으며 이때 Ar 가스와 함께 $N_2$ 가스의 혼합 비율을 다르게 하여 HfN을 증착하였다. 질소 분압에 따라 증착된 HfN 박막은 고온중에서 질소의 영향을 확인하기 위하여 $800^{\circ}C$로 질소 분위기에서 20분간 열처리하여 이후 박막의 nano-mechanical 특성을 nanoindenter를 사용하여 확인하였고 최대 압입력을 250 ${\mu}N$으로 고정하였다. 측정결과 고온 열처리후 HfN 박막은 증착시 질소 분압이 0%에서 5%로 증가함에 따라 surface hardness는 8.6 GPa에서 8.1 GPa로 elastic modulus는 123.7 GPa에서 134 GPa로 각각 변화되는 것을 확인할 수 있었다. 특히, 질소 분압이 2.5%로 증착된 HfN 박막은 열처리후 박막 표면의 물리적 특성이 깊이 방향으로 층을 이루고 있어 nano-indenter 압입시 다수의 pop-in이 나타남을 확인하였다.