• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.34-43
• /
• 2007

Recently, in addition to the sharp increase of mobile nodes, various kinds of wireless technologies are available for mobile nodes. If IPv6 technology is applied to the network, multi-homing terminals which have several public IP addresses on one interface will be common. Accordingly, there are many research activities on mobility management for multi-interface, multi-homming nodes. In this paper we propose an extended fast handover mechanism for multi-interface MIPv6 environments that uses multi-interface FBU (MFBU) message instead of the existing FBU message. The MFBU message has the "tunnel destination" mobility option that points a specific tunnel destination other than NAR, and "T" flag that indicates the existence of tunnel destination option. The proposed mechanism can improve the TCP performance by mitigating packet reordering during FMIPv6 handover that can cause unnecessary congestion control due to 3 duplicate ACKs. In this paper, we implemented a multi-Interface MIPv6 simulator by extending a single-interface MIPv6 simulator in NS-2, and showed that the performance of TCP traffic is improved by using the proposed multi-interface fast MIPv6.

• Journal of Aerospace System Engineering
• /
• v.14 no.6
• /
• pp.26-35
• /
• 2020

The national satellite operation network, which supports multiple satellites, was designated as a Critical Information Infrastructure (CII) in 2017. The network was designed independently from the control network and the information network to enhance physical security. Planning is underway to establish a bidirectional data interface between networks. The data transmission system allows data flow only to the physical layer and the data link layer; hence, only one file can be transferred at any one time. This means that when large amounts of data are being transmitted, no other data can be sent simultaneously in urgent situations. Thus, this paper discusses the design of flexible packets for the transmission of data between networks in an environment where physical security has been enhanced through network separation and based on this, presents a method for transmitting data effectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.93-98
• /
• 2011

Spurred by the advent of ITS and WAVE (Wireless access in vehicular environments) as well as the wide-spread use of smart phones, WMN technology is considered to be a promising technology for extending the Internet access coverage supported by the IEEE802.11 based access points. In this paper, we propose a new MAC protocol which can efficiently utilize the multi-interface multi-channel communication capabilities supposedly equipped in most mesh routers, thereby increasing the network throughput considerably. We also verified its performance through computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7B
• /
• pp.1009-1017
• /
• 2010

Offering of different attractive opportunities by different wireless technologies trends the convergence of heterogeneous networks for the future wireless communication system. To make a seamless handover among the heterogeneous networks, the optimization of the power consumption, and optimal selection of interface are the challenging issues. The access of multi interfaces simultaneously reduces the handover latency and data loss in heterogeneous handover. The mobile node (MN) maintains one interface connection while other interface is used for handover process. However, it causes much battery power consumption. In this paper we propose an efficient interface selection scheme including interface selection algorithms, interface selection procedures considering battery power consumption and user mobility with other existing parameters for overlaying networks. We also propose a priority based network selection scheme according to the service types. MN‘s battery power level, provision of QoS/QoE and our proposed priority parameters are considered as more important parameters for our interface selection algorithm. The performances of the proposed scheme are verified using numerical analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.592-599
• /
• 2011

Proxy Mobile IPv6 (PMIPv6) is the network-based mobility management protocol that network supports the mobility of mobile node (MN) on behalf of the MN. In PMIPv6, a multi-homed MN can connect to the PMIPv6 domain by using only one interface even though it has multiple interfaces. It would be efficient when such a multi-homed MN connects to the PMIPv6 domain by using all of its interfaces. If such a multi-homed MN utilizes all of its interfaces, flow mobility can be provided that the MN handovers one or more flows from one interface to another without re-establishing session. In this paper, we propose the flow-based mobility management protocol by considering the intention of the user. The Router Advertisement (RA) message is used in order for the PMIPv6 domain to inform that the MN can utilize the flow mobility. The proposed mechanism is evaluated by analyzing signaling overhead and handover latency, and the numerical results show that the performance is affected by mobility speed of the MN and the failure probability of the wireless link.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.1
• /
• pp.16-27
• /
• 2012

In multi-interface multi-channel(MIMC) based tactical ad hoc networks, QoS support for required operational capacity is one of the main challenging issues for multi-hop transmissions. To support QoS in such a harsh environment, we propose a novel MAC scheme to minimize multi-hop as well as per-hop delay. The current IEEE 802.11 MAC protocols should contend to reserve the channel resource at every hop by each sender. The every-hop channel contention results in a degradation of end-to-end delay for multi-hop transmissions. The basic idea of our scheme is to make a "multi-hop reservation" at the MAC layer by using the modified RTS frame. It contains additional information such as destination information, packet priority, and hop count, etc. In addition, we differentiate the contention window area according to the packet priority and the number of hops to deliver packets in the predefined allowed latency. Our scheme can minimize the multi-hop delay and support the QoS of the critical data in real time(i.e., VoIP, sensing video data, Video conference between commanders). Our simulation study and numerical analysis show that the proposed scheme outperforms the IEEE 802.11 MAC.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1465-1470
• /
• 2011

In this paper, we propose a new MAC protocol, namely DM-MMAC (Doze Mode Multi-Channel MAC) for ad hoe wireless networks which can utilize multiple channels effectively, thereby enhancing the network throughput considerably. Basically, the IEEE 802.11 specification allows for the use of multiple channels available at the physical layer, but its MAC protocol is designed only for a single channel with the fatal drawback, so called multi-channel hidden terminal problem in multi-channel environments. In this vein, several multi-channel MAC protocols have been proposed, but most of them demonstrate the performance problem that its throughput drastically decreases as the number of mobile hosts residing in a given network increases with small number of available channels. In this work, we tried to improve the performance of multi-channel MAC protocols in terms of network throughput as well as power saving effects by simplifying the channel assignment and channel capturing procedures and reducing the possibility of collisions between mobile hosts.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.239-247
• /
• 2013

In network based on multi-interface, there are needed channel assignment strategy that reduce interference and improve bandwidth efficiency by assigning each interface to available channels in order to utilize effectively multiple wireless interfaces on each node. MCS protocol had been proposed, which improve capacity and throughput of network by using hybrid assignment. MCS uses as the criterion to assign channel the number of node that use the same channel in contention area. but there have an problem that this information exactly does not reflect actually offered channel load. in this paper, we proposes CAMCS protocol to assign channel by that the channel busy degree to indicate the occupancy rate of channel by nodes as well as the number of nodes that use the same channel in inference area is used as criterion for estimation channel load, and conform performance improvement effect by simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1445-1451
• /
• 2005

Home-Network is an integrated network of the PC and all electric home appliances in the home so that they can communicate with each other. In the 21th century, here are various technology for Home Network environment such as HomePNA, IEEE 1394, Ethernet Lan and Bluetooth. For Home Network construction, generally, the standard series interface 'RS232' is used to make communication possible between electric home appliances. However Home network using RS232 has a problem. That is, All machines have to be connected to each other with RS232 using Point-to-Point mode. In this case, the system becomes complicated because we have to use circuits as much as there are machines and increased expenses. To improve this problem, In this thesis, designed home network using RS422 Multi-drop mode serial communication and controled it with embedded linux system. And connected RS422 with motors and sensors using PIC to make the home network virtual environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.512-516
• /
• 2005

Home-Network is an integrated network of the PC and all electric home appliances in the home so that they can communicate with each other. In the 21th century, here are various technology for home Network environment such as HomePNA, IEEE1394, Ethernet Lan and Bluetooth. For Home Network construction, generally, the standard series interface 'RS232' is used to make communication possible between electric home appliances. However Home network using RS232 has a problem. That is, All machines have to be connected to each other with RS232 using Point-to-Point mode. In this case, the system becomes complicated because we have to use circuits as much as there are machines and increased expenses. To improve this problem, In this thesis, designed home network using RS422 Multi-drop mode serial communication and controled it with embedded linux system. And connected RS422 with motors and sensors using PIC to make the home network virtual environment.